Surface effects on phase transition behavior and thermal polymerization of long-chain diynoic acids in micro DSC measurements

Effects of metal surfaces, such as aluminium, silver and gold, on the melting behavior and thermal polymerization of long-chain diynoic acids having a diacetylene group at different positions were investigated by thermal analyses using DSC, TG and other methods. The surface effects of metals were significant in the order of Ag, Al and Au. These effects are attributable to the anchoring of carboxyl group on the surface by chemisorption, which leads to unfavorable condition for polymerization of heptadeca-2,4-diynoic acid. In the case of tricosa-10,12-diynoic acid, containing a flexible methylene chain, inserted between COOH and C≡C?C≡C groups, the anchoring of COOH on the metal surface causes rather favorable effect on the polymerization.     

Novel synthesis of macrocycles with 1,1′-binaphthalene-2,2′-diol using intramolecular oxidative coupling

A new series of BINOL-based macrocycles with two phenolic protons have been synthesized via oxidative coupling reaction using CuCl(OH)-TMEDA.     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Synthesis of 4,5-diaminopyrrolo[1,2-a]quinoline derivatives by annulation of N,N-dialkyl[2-(pyrrol-1-yl)benzylidene]ammonium salts in the presence of an isocyanide

A facile synthetic method for 4,5-diaminopyrrolo[1,2-a]quinoline derivatives has been developed. Treatment of 2-(pyrrol-1-yl)benzaldehydes with secondary amine hydrochloride/NaI/TMSCl/Et₃N in the presence of an isocyano compound leads to the formation of 4-alkyl(or aryl)amino-5-dialkylaminopyrrolo[1,2-a]quinolines.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Basic properties of alkaline earth metal oxides and their catalytic activity in the decomposition of diacetone alcohol

The effect of CO₂ adsorption on the catalytic activity of alkaline earth metal oxides in the title reaction reveals that the number of active (basic) sites follows the order MgO>CaO>SrO>BaO, and the order of base strength is MgO

CO₂ , () : MgO>CaO>SrO>BaO, : MgO     

Phase-transfer catalytic activity of soluble polystyrenes containing crown ether moieties and hydroxyl groups adjacent to the macrorings

Soluble polystyrenes with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of epoxide-containing polystyrenes with monoaza-15-crown-5 or monoaza-18-crown-6. Rate of formation of the polymer-bound alkali cation-crown alkoxide ion pair from the soluble polystyrenes and aqueous NaOH or KOH depended on the loading of crown ether and hydroxyl units and on the size of the macroring. The elimination of HCl from less reactive 2-chloroethylbenzene with aqueous NaOH or KOH in the presence of the soluble polystyrene catalysts under two-phase conditions was limited mainly by the intrinsic reaction rate. The elimination of HBr from more reactive 2-bromoethylbenzene in the presence of the less (11%) ring-substituted polymer catalyst with 18-crown unit was limited by the alkoxide formation rate. © 1994 John Wiley & Sons, Inc.     

Alternative copolymerization of aziridines and carbon monoxide by γ-ray irradiation

The copolymerization of carbon monoxide and aziridines such as ethylenimine and propylenimine was carried out by γ-ray irradiation. Aziridines and carbon monoxide were allowed to copolymerize under γ-ray irradiation from a Co⁶⁰ source and gave a crystalline solid copolymer. The yield of the copolymer increased with reaction temperature. The composition of copolymers obtained did not depend on the feed ratio of monomers and was found to be almost equimolar. The copolymer of ethylenimine and carbon monoxide melted at about 322–335°C. with decomposition and has an infrared spectrum identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. The hydrolyzed product of the ethylenimine–carbon monoxide copolymer was confirmed to be β-alanine by paper chromatography. These results lead to the conclusion that the copolymerization of aziridines and carbon monoxide took place alternatively by γ-ray irradiation, and produced crystalline poly-β-alanines.     

Synthesis, crystal structure and thermoelectric properties of a new carbide Zr2[Al3.56Si0.44]C5

A new quaternary layered carbide, Zr₂[Al_3.56Si_0.44]C₅, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and thermopower and electrical conductivity measurements. The crystal structure was successfully determined using direct methods, and further refined by the Rietveld method. The crystal is trigonal (space group R3m, Z=3) with lattice dimensions of a=0.331059(5), c=4.09450(5) nm and V=0.38864(1) nm³. The final reliability indices calculated from the Rietveld refinement were R_wp=6.24%, R_p=4.21% and R_B=0.82%. The crystal structure is composed of electroconductive NaCl-type ZrC slabs separated by Al₄C₃-type [Al_3.56Si_0.44]C₃ layers. This material had thermoelectric properties superior to those of the ternary layered carbides Zr₂Al₃C₄ and Zr₃Al₃C₅, with the power factor reaching 7.6×10⁻⁵W m⁻¹ K⁻².