Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

An alternative method for the certification of the sulfur mass fraction in coal Standard Reference Materials

The S mass fractions of coal SRMs 2682b, 2684b, and 2685b are certified by direct comparison with coal SRMs 2682a, 2684a, and 2685a, respectively, using high-temperature combustion analysis with infrared (IR) absorption detection. The S mass fractions of the "a" materials used for calibration were previously determined by means of isotope-dilution thermal-ionization mass spectrometry (ID-TIMS). Therefore, the comparisons performed with the combustion-IR absorption method establish direct traceability links to accurate and precise ID-TIMS measurements. The expanded uncertainties associated with the certified S mass fractions are of approximately the same magnitude as would be expected for the ID-TIMS methodology. An important aspect of these certifications is that each "b" material is essentially identical with the corresponding "a" material, because both were produced from the same bulk, homogenized coal. As a test of the efficacy of the new certification approach when calibrant and unknown are not identical, the S mass fraction of coal SRM 2683b has been determined by direct comparison to coal SRM 2683a. These two coals, which have both previously been analyzed with ID-TIMS, are different in terms of S content and other properties. Whereas the S mass fraction for SRM 2683b determined with the new methodology agrees statistically with the ID-TIMS value, there is reason for caution in such cases. In addition to the usefulness of the alternative approach for certification activities within NIST, this approach might also be an excellent way of establishing NIST traceability during the value assignment process for reference materials not issued by NIST. Further research is needed, however, to understand better the scope of applicability.     

Synthesis and antifolate activity of 8,10-dideazaminopterin

A synthesis of 8,10-dideazaminopterin, using 2,4-diamino-6-bromomethyl-8-deazapteridine ( 2 ) as a key intermediate, is described. Condensation of the triphenylphosphinylide derived from 2 with p-formylbenzoyl-L-glutamate afforded a 9,10-dehydro-8,10-dideazaminopterin ester intermediate 5 . Hydrogenation of the olefinic linkage and subsequent hydrolysis of the glutamate ester gave the title compound. 8,10-Dideazaminopterin was a potent growth inhibitor of folate dependent bacteria. It was 16 times more potent then methotrexate as an inhibitor of dihydrofolate reductase derived from L1210 leukemia cells, and showed strong activity against L1210 in mice.     

Acrylamide analysis: assessment of results from six rounds of Food Analysis Performance Assessment Scheme (FAPAS) proficiency testing

Six proficiency tests have now been completed in an ongoing program of the UK Food Analysis Performance Assessment Scheme (FAPAS) for the analysis of acrylamide in a range of food matrixes. Homogeneous test material samples were requested by laboratories throughout the world, with 29 to 45 submitting results for each test. Results were analyzed by appropriate statistical procedures, and z-scores were awarded for reported values. In the absence of both legislation and collaborative trial data, the target standard deviation was derived from the Horwitz equation, although it is acknowledged that there is a need to establish a "fit for purpose" target standard deviation specifically for acrylamide analysis. Participants were encouraged to use the analytical method routinely used in their own laboratory and to provide details of their procedure. Close examination of the data submitted indicates that performance is generally acceptable in terms of accuracy. There is no significant difference between results submitted by gas chromatography and liquid chromatography (GC and LC) methods, and no method dependency on the use of internal standards or sample size. However, choice of extraction solvent may be important, with indications that plain water is an acceptable extraction method. There is evidence from the most recent test that direct (underivatized) GC methodology may present problems, but more data are required and this aspect will be monitored in the continuing proficiency testing program.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Chromatographic studies of corrosion sites in metallic materials

Many types of corrosion phenomena are controlled by the ionic composition of a small volume of solution at the surface. Localized corrosion and atmospheric corrosion are two examples in which < 1 μl of solution can cause dramatic damage. Ion chromatographic (IC) techniques have been used to analyze these solutions in order to gain a better understanding of the mechanisms which govern them. Two examples are presented. The presence of minor alloying elements at localized corrosion sites in two aluminum alloys has been demonstrated, indicating non-stoichiometric dissolution of the alloy during localized corrosion. In addition, IC analysis allowed the determination of the species responsible for the atmospheric corrosion failure of electrical connectors, including their likely origin.     

Magnetic nanoparticle assemblies on denatured DNA show unusual magnetic relaxivity and potential applications for MRI

Denatured (substantially single-stranded) herring sperm DNA acts as a template for the preparation of magnetic nanowires, forming stable aqueous suspensions, which exhibit unprecedentedly high relaxivity at low field, suggesting that the material may be a potentially useful reagent for MRI.     

Development of electrophoretic conditions for the characterization of protein glycoforms by capillary electrophoresis—electrospray mass spectrometry

A capillary electrophoresis (CE) method using acidic buffers and capillaries coated with Polybrene, a cationic polymer has been developed for the separation of glycoproteins and glycopeptides. Electrophoretic conditions have been optimized to provide resolution of individual glycoforms observed for different glycoprotein preparations. These conditions were found to be entirely compatible with the operation of electrospray mass spectrometry (ESMS), which facilitated the assignments of possible carbohydrate compositions of glycopeptides arising from digests of glycoproteins. By using operating conditions enhancing the formation of oxonium fragment ions prior to mass spectral analysis, selective identification of glycopeptides was achieved for complex samples such as those from proteolytic digests or chemical cleavages. Examples of applications are presented for ribonuclease B, ovalbumin, horseradish peroxidase, and a lectin from Erithrina corallodendron using both CE-ESMS and CE with ultraviolet detection (CE-UV).