Efficient photochemical oxetane formation from 1-methyl-2,4,5-triphenylimidazole and benzophenones

In contrast to simple imidazoles, 1-methy1–2,4,5-triphenylimidazole ($\text{1}$) produced stable oxetane photoadducts $\text{3b}$ - $\text{e}$ with good efficiency upon irradiation in the presence of benzophenone derivatives $\text{2b}$ - $\text{e}$ in acetonitrile solution. Irradiation in the solid-phase was also studied. The oxetanes $\text{3b}$ - $\text{e}$ readily underwent cycloreversion by acid catalysis or by heating.     

Wang resin-type linker containing a nitro group for polymer support oligosaccharide synthesis: polymer-supported glycosyl donor

A nitro-introduced Wang resin-type linker for soluble and insoluble polymer support oligosaccharide synthesis is described. The linker was used for connecting glycosyl donors and polymer supports, and was completely stable under the glycosylation conditions tested. The cleavage of the linker was performed under reductive conditions without affecting the protecting groups to release disaccharides.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.     

Dansyl-Modified γ-Cyclodextrin as a fluorescent sensor for molecular recognition

The crystal structure of thiamine iodide sesquihydrate has been determined by X-ray diffraction methods as a host-guest model for coenzyme-substrate interactions. The asymmetric unit contains two chemical units. Both the thiamine molecules A and B, which are crystallographically independent, assume the usualF conformation and have a disordered hydroxyethyl side chain. An iodide anion (or a water molecule) bridges the pyrimidine and thiazolium rings of molecule A (or B) by forming a hydrogen bond with the amino group and an electrostatic contact with the thiazolium ring to stabilize the molecular conformation. In the crystal the thiamine molecules self-associate to form a pipe-like polymeric structure, in which four thiamine hosts surround an iodide guest and hold it through C(2)-H...I hydrogen bonds and thiazolium...I electrostatic interactions. Crystal data: C₁₂H₁₇N₄OS⁺·I^– · 1.5 H₂O, monoclinic,P2₁/c, a=12.585(2), b=25.303(5), c=12.030(2) Å, =115.15(1)°,V=3468(1) ų,Z=8,D _c=1.606 g cm^–3,R=0.045 for 3328 observed reflections. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP. 82156 (13 pages).     

Three novel diepoxy tetrahydrochromones from agarwood artificially produced by intentional wounding

Three novel diepoxy tetrahydrochromones, oxidoagarochromones A (1), B (2), and C (3), were isolated from agarwood artificially produced by intentional wounding of Aquilaria crassna. Inductive production of these compounds was also confirmed at the early stage of wounding in A. sinensis and A. crassna. These diepoxy tetrahydrochromones would play an important role in understanding the biosynthesis of chromone derivatives in agarwood.     

Practical synthesis of S-alkyl thiocarbamate herbicides by carbonylation of amines with carbon monoxide and sulfur

An industrial and economic carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamate herbicides. In the presence of potassium carbonate and solvent DMSO, S-alkyl thiocarbamates, such as thiobencarb and orbencarb (herbicides) are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20 °C).     

Chemical constituents of Glycosmis citrifolia (Willd.) Lindl. Structures of four new acridones and three new quinolone alkaloids

The structures of two new dimeric acridone alkaloids, glycobismine-D (1) and -E (2), having a novel linkage as binary acridones, three monomeric acridones, glycocitrine-IV (3), -V (4), and -VI (5), and three quinolone alkaloids, glycocitlone-A (6), -B (7), and -C (8) from Glycosmis citrifolia (Willd.) Lindl. (Rutaceae) have been elucidated by spectrometric studies.     

Circular Dichroism Study of the Inclusion-Dissociation Behavior of Complexes between a Molecular Nanotube and Azobenzene Substituted Linear Polymers

We have investigated the inclusion properties of molecular nanotubes composed ofcrosslinked -cyclodextrin. Induced circular dichroism was used to probe theformation and dissociation of complexes between the nanotubes and azobenzenemodified linear polymers. The polymer was poly(ethylene glycol) (PEG), either withor without a hydrophobic alkyl chain.It was found that the inclusion complex betweenthe nanotubes and polymers formed at room temperature, and that the polymers dissociated from the nanotubes with increasing temperature. Further, the polymer with hydrophobic alkyl chain was bound inside the nanotube more strongly and dissociated more abruptly with increasing temperature than its hydrophilic counterpart as expected theoretically.     

EPR study of melanin-protein interaction: photoinduced free radicals and progressive microwave power saturation.

The photo-induction of free radicals in synthetic L-dihydroxyphenylalanine (L-DOPA) melanin in the presence of bovine serum albumin (BSA) was studied by electron paramagnetic resonance (EPR) spectroscopy. By monitoring the signal intensities and progressive microwave power saturation it was shown that L-DOPA melanin in solution behaves as a single macromolecule, interacting with BSA and molecular oxygen. In the absence of oxygen, the EPR signal of L-DOPA melanin was homogeneously broadened; the magnetic interaction with oxygen induced inhomogeneous broadening. In aqueous solution, the presence of BSA decreased the accessibility of oxygen to paramagnetic centres in the melanin. On UV-visible illumination, the presence of BSA modified the rates of formation and decay of photoinduced free radicals, resulting in a net enhancement of the EPR signal compared with that observed in pure L-DOPA melanin.     

Quantitative determination of benzalkonium chloride in treated wood by solid-phase extraction followed by liquid chromatography with ultraviolet detection

Ammoniacal copper quat (ACQ) compound wood preservative is comprised of copper and quaternary ammonium compounds with benzalkonium chloride (BAC) as the active ingredient. Solid-phase extraction (SPE) followed by liquid chromatography with ultraviolet detection (LC-UV) was developed for quantitative determination of BAC in treated wood. Five species of wood were used, Japanese cedar (Cryptomeria japonica), Japanese larch (Larix leptolepis), Yezo spruce (Picea jezoensis), Sakhalin fir (Abies sachalinensis), and western hemlock (Tsuga heterophylla). BAC used in the present study was composed of 66% C12, 33% C14 and less than 1% C16. BAC was added to each wood species (500 mg) then extracted with HCl-ethanol (20 ml) and quantitatively determined with LC-UV (262 nm). Wood extractives from the heartwood of each species, except western hemlock, interfered with quantitative determination of BAC, but SPE with an Oasis MCX cartridge was effective in preventing this. Using the present methods, BAC homologue peaks were clearly confirmed without interference. Recoveries from wood ranged from 92 to 101% and the limit of quantitation was approximately 240 microg/g wood for the C12 and C14 homologues.