Synthesis of crown ether-terminated poly(methyl methacrylate) by radical chain transfer polymerization

Mercapto-16-crown-5 was prepared starting from tetraethyleneglycol and 3-chloro-2-chloromethyl-1-propene. Radical polymerization of methyl methacrylate was carried out in the presence of mercapto-16-crown-5 as a chain transfer agent to give crown ether-terminated poly(methyl methacrylate). The end crown group was characterized by IR and ¹H-NMR spectra. Sodium cation was selectively extracted by this crown-containing polymer. The molecular weight of the obtained polymer had influence upon the ability of extraction of sodium cation.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

New odorless method for the Corey-Kim and Swern oxidations utilizing dodecyl methyl sulfide (Dod-S-Me)

Development of the odorless dodecyl methyl sulfide (Dod-S-Me, 1) as an alternative for dimethyl sulfide (DMS) and new odorless methods for the Corey-Kim and Swern oxidations are described. These reactions have been developed with a view toward green chemistry, utilizing Dod-S-Me (1) and common solvents instead of dichloromethane.     

Preparation of substituted benzoyltrimethylsilanes by the palladium-catalyzed silylation of substituted benzoyl chlorides with hexamethyldisilane

A direct preparative route to benzoyltrimethylsilane has been found by the reaction of benzoyl chloride with hexamethyldisilane in the presence of a specified palladium(II) complex as catalyst.     

Semiclassical study of collision-induced predissociation: Comparison of the Landau-Zener model with the method of analytic continuation

Semiclassical calculations are carried out by two methods for the problem of collision-induced predissociation of electronically excited I₂. The first method is that of surface-hopping with the Landau-Zener model. The second method is similar to surface-hopping, except that analytic continuation of the adiabatic potential energy surfaces replaces the Landau-Zener model. Results of the calculations by the two methods compare favorably with each other and with experiment. The possible advantages of the second method are discussed.Camille and Henry Dreyfus Teacher-Scholar, Alfred P. Sloan Research Fellow.     

1,3,8,10-Tetrahydro-2,9-diazadibenzo[cd,lm]perylenes: synthesis of reduced perylene bisimide analogues

A unique family of 1,3,8,10-tetrahydro-2,9-diazadibenzo[cd,lm]perylenes (THDAP) was prepared through a new synthetic strategy. Completion of the synthesis was achieved in several steps from commercially available perylene-3,4,9,10-tetracarboxylic dianhydride via reactions between 3,4,9,10-tetra(chloromethyl)perylene and primary amines. The successful use of a variety of primary amines in the reactions indicated that the synthetic approach provides a rich opportunity to produce new functionalized perylene derivatives.     

Characterization of chemiluminescence from singlet oxygen under laminar flow conditions in a micro-channel and its quenching with beverages

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by a syringe pump, providing a laminar flow liquid-liquid interface. The chemiluminescence from the singlet oxygen was emitted in the collapse of the interface due to molecular diffusion under laminar flow conditions. The chemiluminescence intensity was observed continuously and stably for each combination of reagents fed into the micro-channel; while, in the normal batch-type reactor the chemiluminescence peaks from singlet oxygen were observed within ca. 5 s. The features of the chemiluminescence emitted under laminar flow conditions were examined by changing the concentrations of sodium hypochlorite and hydrogen peroxide; the concentrations of 2.5 mM sodium hypochlorite and 7.5 mM hydrogen peroxide provided highest chemiluminescence intensities without bubble formation. Also, the effects of beverages, such as green tea, coffee, white wine, red wine, and sake (rice wine), on the chemiluminescence intensity as well as the concentrations of sodium hypochlorite and hydrogen peroxide were examined. The chemiluminescence intensities observed with addition of the beverages to the reagents decreased in the following orders; green tea > coffee > red wine > rice wine > white wine (being added to sodium hypochlorite); coffee > white wine > green tea > red wine > rice wine (being added to hydrogen peroxide). It was found that coffee decreased the chemiluminescence intensity (ca. 33% chemiluminescence decrease) without altering the concentrations of sodium hypochlorite or hydrogen peroxide. The cause of the decrease in chemiluminescence with coffee is discussed.     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Thermodynamic study of niobium oxides with ONb ratios from 2.47 to 2.50 using a high-temperature galvanic cell

The partial molar free energy, enthalpy, and entropy of oxygen in niobium oxides with $\text{O}\text{Nb}$ ratios from 2.47 to 2.50 were measured with a galvanic cell in the temperature range from 1084 to 1325 K. The partial molar enthalpies of oxygen of the Nb₂O_5?x and V phases were observed to be nearly independent of composition, indicating the presence of only weak interactions between defects. The value of the slope for the plots of log x in Nb₂O_5?x against log P_O2 was observed to be $\text{?1}\text{5.2}$ which is interpreted in terms of a defect structure involving both singly ionized and doubly ionized oxygen vacancies. The previously proposed phase diagram in the vicinity of Nb₂O_5?x was confirmed by the present emf measurements.