The flameless atomic absorption spectrometric determination of aluminum with a carbon atomization system

The atomic absorption spectrometry of aluminum with a carbon tube atomizer is described, with particular reference to the heating cycle, argon flow rate and amplifier time constant. Interferences are eliminated by pre-atomization heating or with a hydrogen-argon-entrained air flame. Under optimal conditions, the sensitivity (1 % absorbance) is 5·10^?11g, and the relative standard deviation is 2.3 for 2.5 ng Al.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Determination of magnesium and calcium ions in seawater by capillary zone electrophoresis

Capillary zone electrophoresis is proposed for the determination of magnesium and calcium ions in seawater. A carrier solution containing EDTA was adopted for the complexation of these ions and the effect of sodium chloride concentration in the sample solutions on the results was examined. It was found that magnesium and calcium ions could be determined without any pretreatment by injecting 100-fold diluted seawater samples. Linear calibration graphs were obtained for standard solutions containing up to 10.0 mg/l of calcium ion when both peak area and peak height were used. On the other hand, a linear calibration graph was obtained for standard solutions containing up to 20.0 mg/l of magnesium ion when the peak area was used, while a curved one was obtained when the peak height was used. Relative standard deviations were 0.8 and 1.2% when a standard solution containing 5.0 mg/l of magnesium and 8.0 mg/l of calcium ions was analysed 8 times using the peak area. Limits of detection for magnesium and calcium ions were 0.13 and 0.26 mg/l, respectively. The proposed method was applied to the determination of magnesium and calcium ions in surface and bottom seawater samples.     

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

Preferential CO oxidation promoted by the presence of H2 over K-Pt/Al2O3

In preferential CO oxidation in H2-rich gas, K-Pt/Al2O3(K/Pt = 10) was very effective in decreasing CO concentration below 10 ppm in the 375-410 K range, and the turnover frequency of the K-Pt/Al2O3 was 20 times as high as that of Pt/Al2O3 at 353 K; furthermore, the activity of CO oxidation was promoted drastically by the presence of H2.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

The molecular structure and chemical reactivities of the condensation products of o-substituted benzylidenacetylacetone with hydrazine dihydrochloride

Reaction of o-nitrobenzylideneacetylacetone ( 1a ) with hydrazine dihydrochloride in methanol gave 4-(α-methoxy-o-nitrobenzyl)-3,5-dimethylpyrazole hydrochloride ( 4a ), whose structure was unambigously confirmed by an X-ray crystallographic analysis, via 4-(o-nitrobenzylidene)-3,5-dimethylisopyrazole ( 2a ). Compound 2a was synthesized by condensation of 1a with hydrazine dihydrochloride in acetonitrile. Analogously the corresponding o-chloro derivatives ( 2b, 4b ) were obtained. These were converted to N-methyl ( 6b ) and N-acetyl ( 7a,b ) derivatives and the behaviors on bromination and pyrolysis were investigated.     

Method to determine quadruple points of a two-component system containing a simple hydrate phase and behavior of the system near these points

A method for determining quadruple points of a two-component system containing a simple hydrate phase is proposed. This method utilizes the quasi-static change of the system along three-phase equilibrium lines and was proved to be able to determine the quadruple points as accurately as the conventional method. By using this method, even though some preparation is necessary, a quadruple point can be determined in just a single experimental run. The behavior of the system near the quadruple points was also examined experimentally, for both the quasi-static and the irreversible change cases. At the quadruple points, the temperature and pressure of the system were kept constant for a while, as at the triple point of water. In both cases, the representative point of the state of the system passed through the quadruple point on a p–T diagram.     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.