The practical synthesis of a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246)

The synthetic route for a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246), was established by the coupling of optically active components, the bromohydrin 14 and the amine 24. We now describe the practical synthesis of these two optically active components. Bromohydrin 14 was obtained by the asymmetric borane reduction of the prochiral phenacyl bromide 13 using a catalyst prepared from aluminum triethoxide and a chiral amino alcohol. The other optically active component 24 was prepared from (S)-AMT.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Dependence of selective enclathration on types of cholic acid crystals

Competitive recrystallizations of cholic acid (CA) from 1:1 binary mixtures of seven mono-substituted benzenes are demonstrated. The order of preference for guests to be incorporated into the cholic acid crystals are as follows: benzene, toluene > n-amylbenzene, n-hexylbenzene > ethylbenzene, n-propylbenzene, n-butylbenzene. These seven compounds afford bilayer type inclusion crystals that are classified into four types based on the host frameworks and host-guest stoichiometries. The order of selective enclathration corresponds to the four types as follows: 1:1 alpha G > 2:1 alpha G > 1:1 beta T or 2:1 alpha T. The preference for the alpha G type was also confirmed by investigating the host frameworks of the crystals obtained from binary mixtures. The dependence of the selectivity on the different types of CA crystals can be understood in terms of the fit of the guest molecule in the host cavity.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

Liquid crystalline gel with refractive index gradient of curdlan

Curdlan dissolved in aqueous sodium hydroxide was dialyzed to aqueous calcium chloride to form a gel. Transparent and turbid concentric layers observed in the gel cross section perpendicular to the long axis of the dialysis tube were identified as liquid crystalline gels with refractive index gradient and amorphous gels, respectively. The thickness of each layer was proportional to the diameter of the dialysis tube, and the gelation proceeded in proportion to the root of time. The unique pattern formation was attributed to the change of curdlan conformation and calcium-induced cross-linking resulting from a diffusion of calcium cations and hydroxide anions through the dialysis tube. It is suggested that the orderedness of the curdlan molecules decreases by the increase of the curvature of the concentric liquid crystal layers as the layer comes toward the center of the dialysis tube.     

Phase Separation in Methylsiloxane Sol-Gel Systems in a Small Confined Space

The organo-siloxane gel with co-continuous structure derived from methyltrimethoxysilane (MTMS) was synthesized in a confined space between parallel plates by inducing spinodal decomposition during sol-gel transition. The resultant gel morphology was 3-dimensionally observed by laser scanning confocal microscopy (LSCM). The sliced LSCM photographs revealed that the confined gels have inhomogeneity perpendicular to the plate, exhibiting a layered structure. The layered structure can be divided into three regions according to their morphology; interface, near-surface layer, bulk phase. The organo-siloxane depletion layer had formed in the vicinity of both hydrophobic and hydrophilic plates, and the bulk phase had formed slight away from the plates exhibited co-continuous structure. In addition, the confined gels exhibited no shrinkage during drying process that resulted in the larger domain size compared to the monolithic gel. The attractive interaction between the plates and the resultant organo-siloxane phase accounts for the inhibition of shrinkage of confined gels.     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

The effects of epimerization at the 3(1)-position of bacteriochlorophylls c on their aggregation in chlorosomes of green sulfur bacteria. Control of the ratio of 3(1) epimers by light intensity

R- and S-epimerization at the 3(1) position of bacteriochlorophyll (BChl) c and the formation of rod-like aggregates in chlorosomes of green sulfur bacteria were markedly affected in Chlorobium (Cb.) tepidum and Cb. limicola by cultivation under various light intensities (photon fluence rate). The stronger the light, the higher the ratio of the S-epimer to the R-epimer for each homolog of BChl c in the bacteria. S[P,E] BChl cF and S[I,E] BChl cF were found to be the major S-epimers in Cb. tepidum and Cb. limicola, respectively. R[P,E] BChl cF decreased markedly compared to R[E,E] BChl cF in Cb. tepidum, whereas no observable change in the ratio of R[P,E]/R[E,E] was detected for Cb. limicola. With increase in light intensity the Qy absorption maximum of the bacteria shifted to shorter wavelengths. In vitro spectroscopic studies of the aggregates showed a marked difference in the formation of aggregates from R- and S-epimers of BChl c; the S-epimers formed aggregates much more slowly than did the R-epimers. These results suggest that the ratio of the epimers of BChl c might significantly affect the aggregation of BChl in the chlorosome. We propose different roles for the R- and S-epimers in chlorosomes of Cb. limicola and Cb. tepidum.