Temperature Dependence of the Threshold Current and the Lasing Wavelength in 1.3-μm GalnNAs/GaAs Single Quantum Well Laser Diode

Temperature stability of the threshold current and the lasing wavelength is investigated in a 1.3-μm GaInNAs/ GaAs single quantum-well laser. The measured characteristic-temperature was 88 K. The small wavelength shift per change in temperature of 0.35 nm/°C was obtained, indicating the superior lasing-wavelength stability. Therefore, it is shown experimentally that GaInNAs is very promising material for the fabrication of light source with excellent high-temperature performance for optical fiber communications.     

Integral representations of nonnegative solutions for parabolic equations and elliptic Martin boundaries

We consider nonnegative solutions of a parabolic equation in a cylinder D×(0,T), where D is a noncompact domain of a Riemannian manifold. Under the assumption [IU] (i.e., the associated heat kernel is intrinsically ultracontractive), we establish an integral representation theorem: any nonnegative solution is represented uniquely by an integral on (D×{0})∪(M_∂D×[0,T)), where M_∂D is the Martin boundary of D for the associated elliptic operator. We apply it in a unified way to several concrete examples to explicitly represent nonnegative solutions. We also show that [IU] implies the condition [SP] (i.e., the constant function 1 is a small perturbation of the elliptic operator on D).     

Optical humidity and ammonia gas sensors using Reichardt's dye-polymer composites

Optical intensity reflected at 750 nm by Reichardt's betain dye-polymer (PMMA or PEO) composite increased with an increase in humidity and was not affected by ammonia vapor. For the composites treated with hydrochloric acid, the intensity at around 590 nm decreased with an increase in ammonia concentration, and the sensitivity was enhanced by the presence of water vapor. The treatment with hydrochloric acid induced the formation of phenolic group, O⁻---H⁺ and N⁺---Cl⁻ in the dye. The sorption of NH₃ decreases the ionic interactions.     

Effects of natural polysaccharide addition on drug release from calcium-induced alginate gel beads

Calcium-induced alginate gel beads (Alg-Ca) containing various polysaccharides, including an alginate hydrolysate, were prepared and the drug release profiles were investigated. Hydrocortisone (HC) was gradually released from Alg-Ca into the mimic gastric fluid, while in intestinal fluid, it was quickly released with the dissolution of Alg-Ca. However, with Alg-Ca containing 5% chitin (CT), dissolution of Alg-Ca was not observed, and release of HC showed apparent zero-order kinetics. Furthermore, addition of the alginate hydrolysate altered the HC-release profile for Alg-Ca.     

Studies of heteroaromaticity—LXVI: Photochemical and thermal behaviours of heterocycles involving azido-ketone moiety

The photolyses and thermolyses of compounds 1 and 2 in a nucleophilic solvent such as alcohol and diethylamine have been studied and form 4,5-disubstituted amino and alkoxy or dialkylamino groups. The mechanism for the formation of the products are proposed and discussed.     

Condensation of enol silyl ethers with 2-acetoxytetrahydrofuran and -tetrahydropyrans

Trimethylsilyl trifluoromethanesulfonate catalyzes stereoselective condensation of enol silyl ethers and 2-acetoxytetrahydrofuran or -tetrahydropyran derivatives.     

A quantitative analysis of the through-space and the through-bond interactions between lone-pairs in azines: pyridazine,pyrimidine and pyrazine

The INDO calculations were performed on the three azines: pyridazine, pyrimidine, and pyrazine. The cannonical molecular orbitais obtained by these calculations were then transformed into the localized molecular orbitals. With the use of the localized molecular orbitals, the variation in the lone-pair orbital energies of these molecules were pursued in the light of the through-space and/or the through-bond interactions between the specified localized molecular orbitals in a molecule selectively. The interactions were expressed by the summation of several terms: through-space, through-bond, through-virtuals and coupling terms.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Novel synthesis of macrocycles with 1,1′-binaphthalene-2,2′-diol using intramolecular oxidative coupling

A new series of BINOL-based macrocycles with two phenolic protons have been synthesized via oxidative coupling reaction using CuCl(OH)-TMEDA.     

Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.