Effect of sonication on the photo-catalytic mineralization of some chlorinated organic compounds

Effects of the irradiation of ultrasound (US) on the photo-catalytic mineralization of some chlorinated organic compounds such as dichloroethane, tri- and tetrachloroethylenes, chloroacetic acids and chloromethanes were examined in oxygen saturated aqueous solutions suspended titanium dioxide (P25) particles. The yields of the sonochemical mineralization for these compounds were found to be extremely low compared to the photo-catalysis. However, the pre-sonication, US irradiation on the sample solution before the photo-irradiation, enhanced significantly the following photo-catalytic degradation to the complete oxidation. The effect was investigated in detail and it was found that the effect was mainly owing to the increase in the capability of the catalysis of which particles were sparsely dispersed by the sonication. The other contribution of the pre-sonication effect was found to be "pre-sonolysis", the initial formation of some intermediated products sonochemically, which are oxidizable more rapidly further to carbon dioxide than the original compound by the following photo-catalytic reactions. The pre-sonolysis effect was observed remarkably for trichloroacetic acid and tetrachloromethane, both of which are known to be hardly reactive to the photo-catalytic degradation. The photo-catalytic degradation with simultaneous sonication were also carried out for these compounds. The synergetic effect in the mineralization was observed both for carbontetrachloride and for trichloroacetic acid, the higher carbon dioxide yield being obtained in the simultaneous reaction than the sum of the yields in the photo-catalysis and the sonolysis each alone, while no significant synergetic effect was observed in the mineralization of other compounds.     

Novel soft chemical method for optically transparent Ru(bpy)3-K4Nb6O17 thin film

A unique guest-guest ion exchange method was developed for preparing a thin film of a nano-layered K(4)Nb(6)O(17).3H(2)O that possesses both (1) optical transparency and (2) ion-exchangeability under ambient conditions without calcination at high temperature. An optically transparent Ru(bpy)(3)(2+)-K(4)Nb(6)O(17) hybrid thin film, a photoresponsive electrode, was successfully prepared by the guest-guest exchange method by use of the intercalation compound MV(2+)-K(4)Nb(6)O(17) as a precursor. The optically transparent Ru(bpy)(3)(2+)-K(4)Nb(6)O(17) hybrid thin films have been characterized by X-ray diffraction, SEM, AFM, IR, and UV spectroscopies, as well as elemental analysis. The electrochemical behavior of the ITO/Ru(bpy)(3)(2+)-K(4)Nb(6)O(17) hybrid thin film electrode was studied; it also exhibits swift photoresponse in the visible region.     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Reversible light-driven structural changes between the mono- and bilayer stacking alignments in 4-octadecyloxystilbazolium arylcarboxylate films

The present investigation deals with the light-driven morphological changes in multilamella films of N-methyl-4-octadecyloxystilbazolium arylcarboxylates (C18OStz+X-) cast on glass slides. The results of XRD analysis show a photostimulated layer expansion and shrinkage of the stacked thin films along the c-axis under alternative illumination at >350 and 254 nm, respectively. It was revealed that such lamellar changes could be switched either way by a reversible transformation between the mono- and bilayer units in these stacked multilamella films. Moreover, such controlled structural adjustments in the alignment could be initiated by the photocyclodimerization of the stilbazolium moieties of the arylcarboxylate salts; i.e., a monolayer-to-bilayer transformation could be induced at a stage of only 10% cyclodimer formation. The photoinduced patterning on the surface of the films was also analyzed by SEM and fluorescence microscopic investigations.     

A function space model approach to the rational evaluation subgroups

Let f : U → X be a map from a connected nilpotent space U to a connected rational space X. The evaluation subgroup G _*(U, X; f), which is a generalization of the Gottlieb group of X, is investigated. The key device for the study is an explicit Sullivan model for the connected component containing f of the function space of maps from U to X, which is derived from the general theory of such a model due to Brown and Szczarba (Trans Am Math Soc 349, 4931–4951, 1997). In particular, we show that non Gottlieb elements are detected by analyzing a Sullivan model for the map f and by looking at non-triviality of higher order Whitehead products in the homotopy group of X. The Gottlieb triviality of a fibration in the sense of Lupton and Smith (The evaluation subgroup of a fibre inclusion, 2006) is also discussed from the function space model point of view. Moreover, we proceed to consideration of the evaluation subgroup of the fundamental group of a nilpotent space. In consequence, the first Gottlieb group of the total space of each S ¹-bundle over the n-dimensional torus is determined explicitly in the non-rational case.      

High field magnetization of Pr1-xGdxNi single crystals

Magnetization measurements were carried out on Pr_1−xGd_xNi single crystals for x=0.1, 0.2, 0.3 and 0.4 using pulsed magnetic fields up to 55 T and at 4.2 K. For the data observed along the c-axis there are clear indications of transitions, of the combined system of Pr and Gd moments, from a ferrimagnetic to a ferromagnetic state. The observed saturation magnetizations at 55 T and intermediate magnetizations at 1 T were well modeled assuming ferro- and ferri-magnetic structures, respectively.