A study on adsorption of metals by activated carbon in a large-scale (municipal) process of surface water purification

Elements that enter the aquatic environment may pose a health risk to wildlife and humans. The aims of this study were: to determine how the introduction of activated carbon for a water purification system will improve the quality of the water produced; and to investigate the sorption of metals on activated carbons, including determination of the accumulation, as well as changes in concentrations of elements in carbons. The tests were carried out on three types of activated carbons with different granular structure. All samples were collected from Water Treatment Plant Goczalkowice, Poland. Concentrations of elements were measured using an optical emission spectrometer with inductively coupled plasma. The experiment showed that metals accumulating in the activated carbons during the operation included: Ca, Mn, Zn, and Cu. In each of the three types of carbons, it can distinguish such elements as Ba, Al, Cr, Ni, Ti, which are characterized by irregular accumulation during the operation of the filter. The introduction of carbon sorbent for water treatment largely contributed to improvement in the quality of raw material supplied to customers, mainly with regard to taste and smell, as well as to reduction of basic parameters: color, absorbance in the UV range and oxidability.      

Bis(diisopropylammonium) thiosulfate and bis(tert‐butylammonium) thiosulfate

Two new dialkylammonium thiosulfates, namely bis(diisopropylammonium) thiosulfate, 2C₆H₁₆N⁺·S₂O₃²⁻, (I), and bis(tert‐butylammonium) thiosulfate, 2C₄H₁₂N⁺·S₂O₃²⁻, (II), have been characterized. The secondary ammonium salt (I) crystallizes with Z = 4, while the primary ammonium salt (II), with more hydrogen‐bond donors, crystallizes with Z = 8 and a noncrystallographic centre of inversion. In both salts, the organic cations and thiosulfate anions are linked within extensive N—H...O and N—H...S hydrogen‐bond networks, forming extended two‐dimensional layers. Layers are parallel to (10) in (I) and to (002) in (II), and have a polar interior and a nonpolar hydrocarbon exterior. The layered structure and hydrogen‐bond motifs observed in (I) and (II) are similar to those in related ammonium sulfates.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Facile Synthesis of bis‐α‐Aminoalkylphosphinates

Herein we report a facile synthesis of esters of bis‐α‐aminoalkylphosphinic acids obtained by an addition of Cbz‐protected phosphinic analogues of amino acid methyl esters to an appropriate imine in refluxing benzene. Complete deprotection of the esters could be achieved in one step by the action of 30% HBr in acetic acid.     

Herbicidal ionic liquid with dual-function

Herbicidal ionic liquid with dual functions has been synthesized and characterized (properties, chemical stability and biological activity). 2-Chloroethyltrimethylammonium (4-chloro-2-methylphenoxy)acetate prepared in an alkaline environment undergoes the reaction of dehydrochlorination by the E2 mechanism. This may be described as a specific instance of providing third generation ILs with high potential of application, which preserve both pesticidal properties: the herbicidal activity due to their anions and plant growth inhibition effect due to their cations.     

Radionuclides and heavy metal concentrations as complementary tools for studying the impact of industrialization on the environment

The aim of the study was to determine whether using chemical and radiochemical analysis of lake sediments can highlight changes in the climate. Also it was studied whether human impact on the environment can be observed and to what extent such changes are in agreement with historical data. Samples of 16 cm thick sediment cores from the Smreczynski Staw Lake were collected and divided into 1 cm thick sub-samples. The samples were air dried and homogenized. The quantitative analysis of Fe, Mn, Zn, Cr, Cu, Ni, Cd, and Pb in the digested sediment samples was made by using atomic absorption spectrometry. Simultaneously, the radioactivity of ¹³⁷Cs using gamma spectrometry and ²¹⁰Pb_uns using alpha spectrometry, were measured for sediment layer dating. Results showed that iron concentration was in the range 0.3–over 1 % (w/w), and zinc 0.01–0.05 % (w/w). Lesser concentrations were found for copper 18.37–43.6 ppm, manganese 37.5–50.7 ppm, lead 146.1–432 ppm, chromium 12.3–37.4 ppm, nickel 3.1–10.8 ppm and cadmium 0.9–34.6 ppm. Changes in ¹³⁷Cs radioactivity was in the range of 89 ± 11 to 865 ± 62 (Bq kg^?1). Sediments composition can accurately reflect (in terms of time and to what extent) air pollution and natural geo-chemical processes in the environment. However, the choice of the analysed object is crucial in this respect. The Smreczynski Staw Lake, due to its location in the mountains and hydrological situation, proved to be very useful for providing undisturbed analytical samples.     

Spontaneous formation of liquid crystalline phases and phase transitions in highly concentrated plasmid DNA

The liquid crystalline (LC) properties of two supercoiled plasmid DNA samples, pBSK (2958 bp) and pGEM (3000 bp), have been studied using polarised light microscopy (PLM), circular dichroism (CD) and UV–Vis spectroscopy. The influence of methods of isolation on plasmid LC behaviour is described, and using PLM we have demonstrated the spontaneous formation of cholesteric fingerprint-like textures. Preliminary studies of LC phase transitions in pGEM show the irreversibility of LC phase formation, as a consequence of changes in the tertiary structure of supercoiled plasmids. Using UV–Vis spectroscopy a hyperchromic effect was observed with increasing temperature. The CD spectra clearly showed structural changes, and probably mismatching of DNA bases, during cooling. Finally, we have observed an irreversible phase transition in plasmid DNA which is very different from that previously reported in linear DNA.     

Synthesis,mesogenic and dielectric properties of fluorosubstituted isothiocyanatoterphenyls

The synthesis, mesomorphic and physical properties of 14 homologous series of laterally fluorinated 4?-alkyl-4-isothiocyanatoterphenyls were described. Influence of the number of fluorine atoms and their position in the terphenyl core on the phase transition temperatures, nematic range, dielectric and optic anisotropy as well as bulk viscosity were discussed. The compounds with the most optimal properties for formulation of nematic mixtures were selected, and mixture examples with low viscosity and medium or high birefringence were presented.     

Impact of the Synergistic Collaboration of Oligothiophene Bridges and Ruthenium Complexes on the Optical Properties of Dumbbell‐Shaped Compounds

The linear and non‐linear optical properties of a family of dumbbell‐shaped dinuclear complexes, in which an oligothiophene chain with various numbers of rings (1, 3, and 6) acts as a bridge between two homoleptic tris(2,2′‐bipyridine)ruthenium(II) complexes, have been fully investigated by using a range of spectroscopic techniques (absorption and luminescence, transient absorption, Raman, and non‐linear absorption), together with density functional theory calculations. Our results shed light on the impact of the synergistic collaboration between the electronic structures of the two chemical moieties on the optical properties of these materials. Experiments on the linear optical properties of these compounds indicated that the length of the oligothiophene bridge was critical for luminescent behavior. Indeed, no emission was detected for compounds with long oligothiophene bridges (compounds 3 and 4 , with 3 and 6 thiophene rings, respectively), owing to the presence of the ³π? π* state of the conjugated bridge below the ³MLCT‐emitting states of the end‐capping Ru^II complexes. In contrast, the compound with the shortest bridge ( 2 , one thiophene ring) shows excellent photophysical features. Non‐linear optical experiments showed that the investigated compounds were strong non‐linear absorbers in wide energy ranges. Indeed, their non‐linear absorption was augmented upon increasing the length of the oligothiophene bridge. In particular, the compound with the longest oligothiophene bridge not only showed strong two‐photon absorption (TPA) but also noteworthy three‐photon‐absorption behavior, with a cross‐section value of 4×10^?78 cm⁶ s² at 1450 nm. This characteristic was complemented by the strong excited‐state absorption (ESA) that was observed for compounds 3 and 4 . As a matter of fact, the overlap between the non‐linear absorption and ESA establishes compounds 3 and 4 as good candidates for optical‐power‐limiting applications.     

New Reactions of N‐tert‐Butylimines; Formation of N‐Heterocycles by Methyl Radical Elimination on Flash Vacuum Thermolysis of N‐Benzylidene‐ and N‐(2‐Pyridylmethylidene)‐tert‐butylamines

Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.