Growth of iron cobalt oxides by atomic layer deposition

Thin films of iron cobalt oxides with spinel-type structure are made by the atomic layer deposition (ALD) technique using Fe(thd)3 (Hthd = 2,2,6,6-tetramethylheptane-3,5-dione), Co(thd)2, and ozone as precursors. Pulse parameters for ALD-type growth are established and such growth can be achieved at deposition temperatures between 185 and 310 degrees C. Films have been deposited on amorphous soda-lime glass and single-crystalline substrates of Si(100), MgO(100), and alpha-Al2O3(001) which all provide crystalline films, but with various orientations and crystallite sizes. Application of an external magnetic field during the film growth does not influence film growth characteristics (growth rate, crystallinity, topography etc.). Magnetization data are reported for phase-pure films of spinel-type structure with composition Fe2CoO4.     

Determination of PASHs by various analytical techniques based on gas chromatography-mass spectrometry: application to a biodesulfurization process

Polycyclic aromatic sulphur heterocyclic (PASH) compounds, such as dibenzothiophene (DBT) and alkylated derivatives are used as model compounds in biodesulfurization processes. The development of these processes is focused on the reduction of the concentration of sulphur in gasoline and gas–oil [D.J. Monticello, Curr. Opin. Biotechnol. 11 (2000) 540], in order to meet European Union and United States directives.

The evaluation of biodesulfurization processes requires the development of adequate analytical techniques, allowing the identification of any transformation products generated. The identification of intermediates and final products permits the evaluation of the degradation process.

In this work, seven sulfurated compounds and one non-sulfurated compound have been selected to develop an extraction method and to compare the sensitivity and identification capabilities of three different gas chromatography ionization modes. The selected compounds are: dibenzothiophene (DBT), 4-methyl-dibenzothiophene (4-m-DBT), 4,6-dimethyl-dibenzothiophene (4,6-dm-DBT) and 4,6 diethyl-dibenzothiophene (4,6 de-DBT), all of which can be used as model compounds in biodesulfurization processes; as well as dibenzothiophene sulfoxide (DBTO₂), dibenzothiophene sulfone (DBTO) and 2-(2-hydroxybiphenyl)-benzenesulfinate (HBPS), which are intermediate products in biodesulfurization processes of DBT [ A. Alcon, V.E. Santos, A.B. Martín, P. Yustos, F. García-Ochoa, Biochem. Eng. J. 26 (2005) 168]. Furthermore, a non-sulfurated compound, 2-hydroxybiphenyl (2-HBP), has also been selected as it is the final product in the biodesulfurization process of DBT [A. Alcon, V.E. Santos, A.B. Martín, P. Yustos, F. García-Ochoa. Biochem. Eng. J. 26 (2005) 168].

Since, typically, biodesulfurization reactions take place in a biphasic medium, two extraction methods have been developed: a liquid–liquid extraction method for the watery phase and a solid phase extraction method for the organic phase. Recoveries of the selected compound in both media were studied. They were in the range of 80–100% for the watery and in the range of 40–60% for the organic phase, respectively.

Gas chromatography coupled to mass spectrometry (GC–MS) has been employed for the identification of these selected compounds. Three different ionization modes were applied: conventional electron impact (EI); positive chemical ionization (PCI), using methane as the reagent gas; and a recently developed ionization mode known as hybrid chemical ionization (HCI), using perfluorotri-n-butylamine as the reagent gas. Limits of detection and identification capabilities have been compared between the three analytical techniques.

The sensitivity of the three analytical techniques was studied and LOD between 0.05 and 1, between 0.09 and 2 and between 0.001 and 0.043 were achieved for PCI, EI and HCI, respectively.

The developed method was applied in samples from a biodesulfurization process. The biodesulfurization reactions were conducted in resting cell operation mode, using Erlenmeyer flasks or an agitated tank bioreactor. The microorganism employed was Pseudomonas putida CECT 5279. The reaction was performed under controlled air flow, stirring and temperature conditions.     

Recent trends and developments in pyrolysis-gas chromatography

Pyrolysis-gas chromatography (Py-GC) has become well established as a simple, quick and reliable analytical technique for a range of applications including the analysis of polymeric materials. Recent developments in Py-GC technology and instrumentation include laser pyrolysis and non-discriminating pyrolysis. Progress has also been made in the detection of low-level polymer additives with the use of novel Py-GC devices. Furthermore, it has been predicted that future advances in separation technology such as the use of comprehensive two-dimensional gas chromatography will further enhance the analytical scope of Py-GC.     

Modeling intercalation through the sandwich‐type interactions between benzene and 14 polyaromatic molecules: DFT and ab initio results

We use second order Moller Plesset perturbation theory and several density functional theory methods to calculate the counterpoise corrected electronic interaction energies between benzene and a series of polyaromatic molecules. These systems serve as a simple model for DNA intercalation. We show that addition of nitrogen atoms to the polyaromatic molecules always increases sandwich‐type interactions, and that, of the density functional theory methods studied, only SVWN can mimic the interaction energies and optimal separations obtained with perturbation theory. SVWN reproduces the optimal molecular distances obtained with perturbation theory very well, and often comes within less than 10% of the interaction energy. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Thermally Induced Carbohydroxylation of Styrenes with Aryldiazonium Salts

The radical carbohydroxylation of styrenes with aryldiazonium salts has been achieved under mild thermal conditions. A broad range of aryldiazonium salts was tolerated, and the reaction principle based on a radical–polar crossover mechanism could be extended to carboetherification as well as to a two‐step, metal‐free variant of the Meerwein arylation leading to stilbenes.     

In situ hydrazine reduced silver colloid synthesis – Enhancing SERS reproducibility

Herein we report a novel strategy for the in situ synthesis of the silver colloids for LoC-SERS applications. Silver nanoparticles are obtained in a segmented flow based glass microfluidic chip by the reduction of silver ions with hydrazine in ammonium hydroxide solution. Citrate ions are used as protecting agents. The synthesized nanoparticles are characterized by UV-VIS spectroscopy, SEM and TEM imaging. The SERS performance of the in situ synthesized nanoparticles is tested by using adenine as a test analyte right after the colloid synthesis. Reproducibility is tested by repeating the measurements three times at independent days applying the same measurement conditions. In comparison with nanoparticles synthesized in a conventional strategy i.e. in a large batch, chip synthesized nanoparticles show a better day-to-day and long-term reproducibility, lower detection limits and broader working ranges. The great advantage offered by the in situ synthesized colloids combined with the already proven potential of LoC-SERS for bioanalytics, raises the possibility of the employment of LoC-SERS as a fast and sensitive analytic tool in a plethora of applications.     

Fast‐Track,One‐Step E. coli Detection: A Miniaturized Hydrogel Array Permits Specific Direct PCR and DNA Hybridization while Amplification

A timesaving and convenient method for bacterial detection based on one‐step, one‐tube deoxyribonucleic acid (DNA) hybridization on hydrogel array while target gene amplification is described. The hydrogel array is generated by a fast one‐pot synthesis, where N,N′‐dimethylacrylamide/polyethyleneglycol(PEG₁₉₀₀)‐bisacrylamide mixture polymerizes via radical photoinitiation by visible light within 20 min concomitant with in situ capture probe immobilization. These DNA‐functionalized hydrogel droplets arrayed on a planar glass surface are placed in the polymerase chain reaction (PCR) mixture during the thermal amplification cycles. The bacterial cells can be implemented in a direct PCR reaction, omitting the need for prior template DNA extraction. The resulting fluorescence signal is immediately detectable after the end of the PCR (1 h) following one short washing step by microscopy. Therefore a valid signal can be reached within 1.5 h including 10 min for pipetting and placement of the tubes and chips. The performance of this novel hydrogel DNA array was successfully proven with varying cell numbers down to a limit of 10¹Escherichia coli cells.

     

Bioactive Applications for Electrospun Fibers

Electrospinning is a versatile technique providing highly tunable nanofibrous nonwovens. Many biomedical applications have been developed for nanofibers, among which the production of antimicrobial mats stands out. The production of scaffolds for tissue engineering, fibers for controlled drug release, or active wound dressings are active fields of research exploiting the possibilities offered by electrospun materials. The fabrication of materials for active food packaging or membranes for environmental applications is also reviewed. We attempted to give an overview of the most recent literature related with applications in which nanofibers get in contact with living cells and develop a nano-bio interface.     

In-situ investigation of the adsorption of globular model proteins on stimuli-responsive binary polyelectrolyte brushes

Binary brushes constituted from two incompatible polymers can be used in the form of ultrathin polymeric layers as a versatile tool for surface engineering to tune physicochemical surface characteristics such as wettability, surface charge, chemical composition, and morphology and furthermore to create responsive surface properties. Mixed brushes of oppositely charged weak polyelectrolytes represent a special case of responding surfaces that are sensitive to changes in the pH value of the aqueous environment and therefore represent interesting tools for biosurface engineering. The polyelectrolyte brushes used for this study were composed of two oppositely charged polyelelctrolytes poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA). The in-situ properties and surface characteristics such as as surface charge, surface tension, and extent of swelling of these brush layers are functions of the pH value of the surrounding aqueous solution. To test the behavior of the mixed polylelctrolyte brushes in contact with biosystems, protein adsorption experiments with globular model proteins were performed at different pH values and salt concentrations (confinement of counterions) of the buffer solutions. The influence of the pH value, buffer salt concentration, and isoelectric points (IEP) of the brush and protein on the adsorbed amount and the interfacial tension during protein adsorption as well as the protein adsorption mechanism postulated in reference to recently developed theories of protein adsorption on polyelectrolyte brushes is discussed. In the salted regime, protein adsorption was found to be similar to the often-described adsorption at hydrophobic surfaces. However, in the osmotic regime the balance of electrostatic repulsion and a strong entropic driving force, "counterion release", was found to be the main influence on protein adsorption.     

Preparation and properties of thin films of hyperbranched polyesters with different end groups

Hyperbranched polyesters (HBP) with different end groups were prepared as thin films. They were characterized with regard to their chemical composition, thickness, optical constants and morphology using infrared spectroscopy, spectroscopic ellipsometry, and atomic force microscopy. The surface properties of the films were determined by zeta‐potential and contact angles measurements. The differences in the molecular structure and surface energetic and acid‐base properties between HBP materials with carboxylic, hydroxy and acetoxy end groups result in differences in their swelling behavior in atmospheric humidity. The swelling behavior at different atmospheric humidity was observed in situ using spectroscopic ellipsometry and reflectometric interference spectroscopy. From the results it can be concluded that HBP films can be used potentially as sensoric materials.