Reactive intermediates in asymmetric cross-coupling catalysed by palladium P-N chelates

The palladium dibromide complexes of (S,R)-(1,1′-bis-diphenylphosphino)-2-ferrocencylthyldimethylamine and (S,R)-(1-diphenylphosphino)-2-ferrocenylethyldimethylamine have been reduced with dilithiocyclooctatetraene to form the corresponding Pd⁰ cyclooctatetraene complexes. Their reactions with E-4-methoxy-2′-bromophenylethene, and then benzylmagnesium chloride at −60 to −30°C, provide information on the structure of intermediates in asymmetric cross-coupling.     

Phase diagrams for the YBa2Cu3O7 family — ANNO 1996

Phase diagrams for cuprates of alkaline earth and rare earth elements are presented, covering binary to quintenary oxides and including selected solid solution series with other elements. Elementary crystal chemical data are included for identification of the occurring phases. Chemical stability is discussed with respect to the high-temperature reactions with Lewis acids like CO₂, protons, etc. Particularly the occurrence of oxide carbonates is consistently pointed out as one of the possible reasons for contradictory results in phase diagrams which comprise oxides with high basicity.     

Unusual photophysical switching in a Ru(II) diimine DNA probe caused by amide functionalisation

Whereas the complex [Ru(phen)2Medpq]2+(phen=1,10-phenanthroline; Medpq=2-methyldipyrido[3,2-f:2',3'-h]-quinoxaline) is luminescent in both aqueous and nonaqueous solutions, [Ru(phen)2dpqa]2+(2-pentylamidodipyrido[3,2-f:2',3'-h]-quinoxaline) does not emit in water but does so strongly in organic solvents or when bound to DNA--suggesting its use as a photochemical and photophysical probe for nucleic acids.     

Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

Characteristics and production of thermostable α-amylase

Thermostable α-amylases have application in a variety of industrial processes and enzymes from a substantial number of thermophilic bacteria and fungi have been screened and characterized to varying degrees. The characteristics of these enzymes are summarized in this review. The genetics of α-amylase production inBacillus subtilis is reviewed and classical and recombinant DNA approaches to increasing α-amylase production are discussed.     

The Molecular and Crystal Structure of the Glycopeptide A-40926 Aglycone

The crystal structure of a glycopeptide antibiotic A–40926 aglycone was investigated by X-ray analysis at ?120°. A-40926 crystallises in the orthorhombic space group P2₁2₁2₁ with two monomers in the asymmetric unit, a = 21.774(4), b = 28.603(7), c = 29.757(4) Å. ‘Conventional’ direct methods approach failed to solve the structure, but a novel iterative real/reciprocal space procedure was successful. Refinement against 11248 F² data led to R1 = 13.3% for 6770 F > 4σ (F). The two monomers of A-40926 have similar conformations and are bound by antiparallel H-bonds to form a ‘chain’ structure of connecting dimers. The antibiotic molecule possesses a ‘binding pocket’ for the C-terminal carboxy group of the cell-wall protein, which is consisten with suggestions based on NMR data and the recently reported crystal structure of ureido-balhimycin. In A-40926 the monomers are polymerically linked by H-bonds, quite unlike the tight dimer formation observed in ureido-balhimycin.     

3-Diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolat(II) — Synthese und Struktur

3-Diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolate(II) — Synthesis and Structure Bis-(N′, N′-diethyl-N-benzoylselenoureato)nickel(II) reacts with diphosgene in benzene to 3-diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolate(II). Its structure is confirmed by RKSA and ESCA. The compound consists of cations, which are planar fivemembered rings and of tetrahedral tetrachloroniccolate(II) anions. The complex is isomorphic with 3-diethylamino-5-phenyl-1,2,4-dithiazolium-tetrachloroniccolate(II).     

Electrospray ionization quadrupole time-of-flight mass spectrometry and quadrupole mass spectrometry for genotyping single nucleotide substitutions in intact polymerase chain reaction products in K-ras and p53

Single nucleotide polymorphisms (SNPs) and mutations were genotyped for both homozygous and heterozygous PCR products of p53, a tumor suppressor gene, and K-ras, an oncogene, using electrospray ionization (ESI) quadrupole time-of-flight (Q-TOF) mass spectrometry (MS) and ESI-quadrupole MS analysis. Mass accuracy was adequate for both instruments to detect genetic changes in homozygous PCR products, including the most difficult to distinguish (adenine [A] --> thymine [T] transversion). However, for the detection of A --> T shifts (9.0 Da difference) in heterozygous PCR products, the increased resolution of ESI-Q-TOFMS proved essential. Although, greater mass differences in heterozygotes (e.g. cytosine [C] <--> T or guanine [G] <--> A) can be discriminated using ESI-quadrupole MS analysis.     

Use of the hydroxyl radical and gel electrophoresis to study DNA structure

The hydroxyl radical has been used as a chemical probe to study in solution the structure of DNA and DNA-protein complexes. The hydroxyl radical abstracts a deoxyribose hydrogen atom, cleaving one strand of the DNA. The cutting pattern, visualized by separating the cleavage products using gel electrophoresis, shows the reactivity of each backbone position toward the radical. This method has been applied to studies of DNA bending and helical twist. Phased runs of adenines (adenine tracts) cause sequence-directed DNA bending. The hydroxyl radical cleavage of a bent DNA fragment containing short adenine tracts phased with the helix screw gives rise to an unusual cutting pattern. The hydroxyl radical cleavage rate decreases in the 5' to 3' direction along each adenine tract, with a minimum at the 3' end of each adenine tract. The cleavage of the matching thymine tract is similar, but the minimum in the pattern is offset in the 3' direction. This pattern on the autoradiograph of the gel is interpreted to indicate that bending is accompanied by a narrow minor groove in the DNA molecule. Furthermore, hydroxyl radical cleavage results in different cutting patterns for two similar sequences, (CGA4T4)5 and (CGT4A4)5, which have been shown to be bent and relatively straight, respectively. The hydroxyl radical method has also been used to determine the helical repeat of the metallothionein IIA gene to be about 10.5 base pairs per turn. Methods of optimizing the hydroxyl radical reaction for DNA-protein footprinting are discussed. Because individual gel bands give information about cutting frequency at particular positions in the backbone, gel resolution and clear autoradiographs are important to this work.(ABSTRACT TRUNCATED AT 250 WORDS)     

A system for defining reference materials applicable to all food matrices

Recently the subcommittee on Food Definition of the AOAC INTERNATIONAL Task Force on Methods for Nutrition Labeling proposed a Food Matrix Organizational System [4] to systematically judge the applicability of collaboratively studied methods over a range of food matrices. This system describes a food matrix by its location in one of nine sectors in a triangle, with each point of the triangle defined as representing 100% and the opposite side representing 0% of the normalized contents of each of three major components of FAT, PROTEIN and CARBOHYDRATE. Foods falling within the same sector would be chemically similar and thus should behave in a similar analytical manner. This same scheme can be used to select one or two food matrices representing each sector, for development of a series of reference materials representing all foods. The list of 5250 foods contained in the USDA Nutrient Data Base for Standard Reference has been sorted and matched to this schematic to determine the scope of the selection process. In addition the list of foods in the USDA Data Base for Food Consumption Surveys has been examined. Results and progress of this selection process are reported.