Resonance absorption in the amorphous semiconductor Si12Ge10As30Te48

The complex permitivity of the amorphous semiconductor Si₁₂Ge₁₀As₃₀Te₄₈ has been measured at frequencies from 1 to 4 GHz and at temperatures from 13 to 42°C. The results show that there is resonace absorption at the resonace frequency of 1.6 GHz corresponding to a relaxation time of 2.45 × 10^?9 sec at 20°C, and that this resonance frequency increases with increasing temperature. On the basis of the model that the power loss is due to the transitions of dipoles between their equilibrium positions, the computed results are in good agreement with experimental ones. The size and the possible formation of such dipoles are also discussed.     

Preparation and characterization of LiAlxCoyNi1-x-yO2 particles

Lithium-aluminum-cobalt-nickel oxide (LiAlxCoyNi1-x-yO2) particles, generally used as cathode of lithium battery, were prepared by chemical coprecipitation from an aqueous solution of LiOH, AI(NO3)3, Co(NO3)2 and Ni(NO3)2 with NH4OH. XRD, SEM and FTIR were used to examine the effect of nickel content on the product. FHR patterns showed that increase in nickel content decreased the absorption strength of the peak of spinel structure of the product, attributed to the occupation by nickel in the aluminum sites. Particle size and electrical properties of the lithium-aluminum-cobalt-nickel oxide (abbreviated as LACNO) particles were also determined.     

Bulk and near-surface annealing behavior of the 0.8 eV luminescence in semi-insulating gallium arsenide

An annealing study of the 0.8 eV photoluminescence band in LEC GaAs has been performed, using a combination of 10 min annealing steps over a temperature range of 800–1100° C and one hour furnace annealing steps at 500–700° C. Results show that the defect responsible for the luminescence is stable in bulk material under all annealing conditions that have been investigated. In combination with earlier results, this demonstrates a stability of the defect to temperatures in excess of 900° C and indicates a parallel with the annealing behavior of the 0.67 eV band in semi-insulating GaAs. The observed annealing behavior is very different in the near-surface region, indicating an important role of As out-diffusion.     

Efficiency decomposition in two-stage data envelopment analysis: An application to non-life insurance companies in Taiwan

The efficiency of decision processes which can be divided into two stages has been measured for the whole process as well as for each stage independently by using the conventional data envelopment analysis (DEA) methodology in order to identify the causes of inefficiency. This paper modifies the conventional DEA model by taking into account the series relationship of the two sub-processes within the whole process. Under this framework, the efficiency of the whole process can be decomposed into the product of the efficiencies of the two sub-processes. In addition to this sound mathematical property, the case of Taiwanese non-life insurance companies shows that some unusual results which have appeared in the independent model do not exist in the relational model. In other words, the relational model developed in this paper is more reliable in measuring the efficiencies and consequently is capable of identifying the causes of inefficiency more accurately. Based on the structure of the model, the idea of efficiency decomposition can be extended to systems composed of multiple stages connected in series.     

New Epoxy‐Substituted Nitrogenous Bisabolene‐Type Sesquiterpenes from a Hainan Sponge Axinyssa sp.

Two new uncommon epoxy‐substituted nitrogenous bisabolene‐type sesquiterpenes, 3‐formamido‐7,8‐epoxy‐α‐bisabolane ( 4 ), 3‐isocyano‐7,8‐epoxy‐α‐bisabolane ( 5 ), together with three known related sesquiterpenes, 1 – 3 , were isolated from the Hainan sponge Axinyssa sp. Their structures were determined on the basis of extensive spectroscopic analyses and by comparison of their NMR data with those of structurally related compounds.     

Proteomic identification of salivary transferrin as a biomarker for early detection of oral cancer

Oral cancer has a low five-year survival rate. Early detection of oral cancer could reduce the mortality and morbidity associated with this disease. Saliva, which can be sampled non-invasively and is less complex than blood, is a good potential source of oral cancer biomarkers. Proteomic analysis of saliva from oral cancer patients and control subjects was performed to identify salivary biomarkers of early stage oral cancer in humans. The protein profile of pooled salivary samples from patients with oral squamous cell carcinoma (OSCC) or OSCC-free control subjects was analyzed using two-dimensional gel electrophoresis (2DE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses. Potential biomarkers were verified by Western blotting and ELISA assays. Transferrin levels were elevated in the saliva of OSCC patients as determined using 2DE followed by MALDI-TOF MS and confirmed by MALDI-TOF/TOF MS, Western blotting and ELISA. The increase in salivary transferrin levels in OSCC patients strongly correlated with the size and stage of the tumor. The area under the receiver-operating characteristics curves showed that salivary transferrin-based ELISA was highly specific, sensitive and accurate for the early detection of oral cancer. We have identified salivary transferrin as a biomarker for the detection of early stage oral cancer. This finding provides a promising basis for the development of a non-invasive diagnostic test for early stage oral cancer.     

Selective enrichment and identification of azide-tagged cross-linked peptides using chemical ligation and mass spectrometry

Protein-protein interaction is one of the key regulatory mechanisms for controlling protein function in various cellular processes. Chemical cross-linking coupled with mass spectrometry has proven to be a powerful method not only for mapping protein-protein interactions of all natures, including weak and transient ones, but also for determining their interaction interfaces. One critical challenge remaining in this approach is how to effectively isolate and identify cross-linked products from a complex peptide mixture. In this work, we have developed a novel strategy using conjugation chemistry for selective enrichment of cross-linked products. An azide-tagged cross-linker along with two biotinylated conjugation reagents were designed and synthesized. Cross-linking of model peptides and cytochrome c as well as enrichment of the resulting cross-linked peptides has been assessed. Selective conjugation of azide-tagged cross-linked peptides has been demonstrated using two strategies: copper catalyzed cycloaddition and Staudinger ligation. While both methods are effective, Staudinger ligation is better suited for enriching the cross-linked peptides since there are fewer issues with sample handling. LC MSⁿ analysis coupled with database searching using the Protein Prospector software package allowed identification of 58 cytochrome c cross-linked peptides after enrichment and affinity purification. The new enrichment strategy developed in this work provides useful tools for facilitating identification of cross-linked peptides in a peptide mixture by MS, thus presenting a step forward in future studies of protein-protein interactions of protein complexes by cross-linking and mass spectrometry.     

Hydrogen‐Bonding Induced Cooperative Effect on the Energy Transfer in Helical Polynorbornenes Appended with Porphyrin‐Containing Amidic Alanine Linkers

Polynorbornenes appended with porphyrins containing a range of different linkers are synthesized. The use of bisamidic chiral alanine linkers between the pending porphyrins and the polymeric backbone has been shown to bring the adjacent porphyrin chromophores to more suitable orientation for exciton coupling owing to hydrogen bonding between the adjacent linkers. The hydrogen bonding between the adjacent pendants in these polymers may induce a cooperative effect and therefore render single‐handed helical structures for these polymers. Such a cooperative effect is reflected in the enhancement of FRET efficiencies between zinc–porphyrin and free base porphyrin in random copolymers.     

Analysis of amino acids and biogenic amines in breast cancer cells by capillary electrophoresis using polymer solutions containing sodium dodecyl sulfate

We describe simultaneous analysis of naphthalene-2,3-dicarboxaldehyde (NDA)-amino acid and NDA-biogenic amine derivatives by CE in conjunction with light-emitting diode-induced fluorescence detection using poly(ethylene oxide) (PEO) solutions containing sodium dodecyl sulfate (SDS). After sample injection, via EOF 0.1% PEO prepared in 100 mM TB solution (pH 9.0) containing 30 mM SDS entered a capillary filled with 0.5 M TB solution (pH 10.2) containing 40 mM SDS. Under this condition, 14 NDA-amino acid and NDA-amine derivatives were separated within 16 min, with high efficiency ((1.0–3.2) × 10⁵ theoretical plates) and sensitivity (LODs at S/N = 3 ranging from 2.06 to 19.17 nM). In the presence of SDS and PEO, analytes adsorption on the capillary wall was suppressed, leading to high efficiency and reproducibility. The intraday analysis RSD values (n = 3) of the mobilities for the analytes are less than 0.52%. We have validated the practicality of this approach by quantitative determination of 9 amino acids in breast cancer cells (MCF-7) and 10 amino acids in normal epithelial cells (H184B5F5/M10). The concentrations of Tau and Gln in the MCF-7 cells were different than those in the H184B5F5/M10 cells, respectively. Our results show the potential of this approach for cancer study.     

Coherent control of nanoscale light localization in metamaterial: creating and positioning isolated subwavelength energy hot spots

We show the strong optically induced interactions between discrete metamolecules in a metamaterial system and coherent monochromatic continuous light beam with a spatially tailored phase profile can be used to prepare a subwavelength scale energy localization. Well-isolated energy hot spots of a fraction of a wavelength can be created and positioned on the metamaterial landscape offering new opportunities for data storage and imaging applications.