Electron and oxygen transfer in polyoxometalate, H(5)PV(2)Mo(10)O(40), catalyzed oxidation of aromatic and alkyl aromatic compounds: evidence for aerobic Mars-van Krevelen-type reactions in the liquid homogeneous phase

The mechanism of aerobic oxidation of aromatic and alkyl aromatic compounds using anthracene and xanthene, respectively, as a model compound was investigated using a phosphovanadomolybdate polyoxometalate, H(5)PV(2)Mo(10)O(40), as catalyst under mild, liquid-phase conditions. The polyoxometalate is a soluble analogue of insoluble mixed-metal oxides often used for high-temperature gas-phase heterogeneous oxidation which proceed by a Mars-van Krevelen mechanism. The general purpose of the present investigation was to prove that a Mars-van Krevelen mechanism is possible also in liquid-phase, homogeneous oxidation reactions. First, the oxygen transfer from H(5)PV(2)Mo(10)O(40) to the hydrocarbons was studied using various techniques to show that commonly observed liquid-phase oxidation mechanisms, autoxidation, and oxidative nucleophilic substitution were not occurring in this case. Techniques used included (a) use of (18)O-labeled molecular oxygen, polyoxometalate, and water; (b) carrying out reactions under anaerobic conditions; (c) performing the reaction with an alternative nucleophile (acetate) or under anhydrous conditions; and (d) determination of the reaction stoichiometry. All of the experiments pointed against autoxidation and oxidative nucleophilic substitution and toward a Mars-van Krevelen mechanism. Second, the mode of activation of the hydrocarbon was determined to be by electron transfer, as opposed to hydrogen atom transfer from the hydrocarbon to the polyoxometalate. Kinetic studies showed that an outer-sphere electron transfer was probable with formation of a donor-acceptor complex. Further studies enabled the isolation and observation of intermediates by ESR and NMR spectroscopy. For anthracene, the immediate result of electron transfer, that is formation of an anthracene radical cation and reduced polyoxometalate, was observed by ESR spectroscopy. The ESR spectrum, together with kinetics experiments, including kinetic isotope experiments and (1)H NMR, support a Mars-van Krevelen mechanism in which the rate-determining step is the oxygen-transfer reaction between the polyoxometalate and the intermediate radical cation. Anthraquinone is the only observable reaction product. For xanthene, the radical cation could not be observed. Instead, the initial radical cation undergoes fast additional proton and electron transfer (or hydrogen atom transfer) to yield a stable benzylic cation observable by (1)H NMR. Again, kinetics experiments support the notion of an oxygen-transfer rate-determining step between the xanthenyl cation and the polyoxometalate, with formation of xanthen-9-one as the only product. Schemes summarizing the proposed reaction mechanisms are presented.     

Wang resin-type linker containing a nitro group for polymer support oligosaccharide synthesis: polymer-supported glycosyl donor

A nitro-introduced Wang resin-type linker for soluble and insoluble polymer support oligosaccharide synthesis is described. The linker was used for connecting glycosyl donors and polymer supports, and was completely stable under the glycosylation conditions tested. The cleavage of the linker was performed under reductive conditions without affecting the protecting groups to release disaccharides.     

Relative Lewis basicities of six AI(ORF)4- superweak anions and the structures of LiA

The relative Lewis basicities of six Al(ORF)4- ions, Al[OC(CH3)(CF3)2]4-, Al(OC(CF3)3]4-, Al(OCPh(CF3)2]4-, Al[OC[4-C6H4(tBu)](CF3)2]4-, Al(OC(Cy)(CF3)2]4-, and Al(OCPh2(CF3)]4-, have been determined by measuring their relative coordinating abilities towards Li+ in dichloromethane. The relative Li- Lewis basicities of the Al(ORF)4- ions are linearly related to the aqueous pKa values of the corresponding parent HORF fluoroalcohols. The Lewis basicity of Al[OCH(CF3)2]4- could not be measured because two of these anions can coordinate to one Li+ cation. The structures of LiAl[OCH(CF3)2]4 and [1-Et-3-Me-1,3-C3H3N2][Li[Al[OCH(CF3)2)4]2] were determined.     

Fullerenes separation with monomeric type C30 stationary phase in high-performance liquid chromatography

The temperature effect on the separation of fullerenes in LC was examined using monomeric type C30, C18 and C8 alkyl bonded stationary phases. It appears that the C30 phase exhibits superior separation ability for fullerenes. It is observed that the maximum retention temperature of fullerenes on the C30 phase is around 20 degrees C. A strong correlation between the changes in NMR spectra and the retention behavior of the solutes was found. The interpretation of the retention behavior of fullerenes on the alkyl bonded stationary phases, including the behavior in subambient temperature, is discussed using the information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.     

Clinical evaluation of immunoglobulin-E radioimmunoassay kit

An IgE RIA kit (Sandwich method; Dainabott), is used to obtain the following results. (1) Standard curve: Since the range of reproduction rate show 3.16-7.07% (C.V.), the curve become steep. (2) Incubations under controlled situation: Both of the incubations are controlled at 15-30 degrees C for 2 h. (3) Reproducibility test: Coefficients of variation (C.V.) of intra-assay and inter-assay variation are 2.32-3.94% and 2.92-3.92% respectively. (4) Recovery test: A result of the recovery test range between 100.1-101.7%. (5) Dilution test: Multiple dilution effects are observed. (6) Average counts of the serum IgE for the controlled and diseased groups: The average counts of the serum IgE for the controlled group, atopic diseased group, allergic rhinitis group and allergic bronchial asthma are 144.9 +/- 183.2 IU/ml, 1,099.0 +/- 2,782.4 IU/ml, 1,150.9 +/- 2,063.3 IU/ml and 600.7 +/- 686.4 IU/ml respectively. The value of the diseased groups have tendency to show higher averages than the controlled group. Since the controlled and diseased groups show wide distributions of the serum IgE level, there is no significant difference of two variations. However the diseased groups have tendency to show higher ratio of the serum IgE level in blood than the controlled groups. These basic researches are quite meaningful, because they are able to apply for a supplemental diagnosis of the atopic and parasitic disease.     

Enteric solid dispersion of ciclosporin A (CiA) having potential to deliver CiA into lymphatics

Solid dispersions composed of three components, ciclosporin A (CiA), surfactant (HCO-60) and a pharmaceutical additive, were prepared. As an additive, cellulose acetate phthalate (CAP), methacrylic acid and methacrylic acid methylester copolymer (Eudragit L-100) and hydroxypropylmethylcellulose phthalate (HP-55), which are generally used as enteric coating materials, were employed. The dissolution behavior of CiA from these enteric solid-dispersion system was studied according to the paddle method of JP XI in comparison with that of Sandimmun, an olive oily CiA solution as a reference. Solid dispersion of CiA preparation did not dissolve in the 1st test fluid (pH 1.2) in 2 h. In the 2nd fluid (pH 6.8), about 80% of CiA was dissolved within 12 min, though the dissolution rate was dependent on both the quality and quantity of the additives. An in vivo systemic and lymphatic availability study was performed with rats whose carotid artery and thoracic lymph duct were cannulated. After intrastomach administration of each CiA preparation to rats at a dose of 7 mg/kg, blood and lymph samples were collected for 6 h. One of the HP-55 preparations gave the highest plasma CiA level, Cmax = 0.99 +/- 0.20 (S.E., n = 4) micrograms/ml, and also showed the highest lymphatic availability, the percentage of dose delivered to the lymphatics in 6 h was 1.98 +/- 0.10% and the maximum lymph CiA level was 76.8 +/- 12.86 micrograms/ml. Lymphatic availability of CiA from Sandimmun was 0.78 +/- 0.11% and the peak plasma CiA level was 0.46 +/- 0.10 microgram/ml.(ABSTRACT TRUNCATED AT 250 WORDS)     

Photo-switchable ion and enzyme sensors. Photoinduced potentiometric response of glassy carbon electrode coated with polymer or polymer/enzyme dual membrane

Photo-switchable ion and enzyme sensors were fabricated by the use of glassy carbon electrode coated with nonactindoped or enzyme modified poly(vinyl chloride) (PVC) membranes. The ion sensor with nonactin-doped PVC membrane, which contained spirobenzopyran as the photosensitive dye, exhibited a potentiometric photoresponse to NH4+ ion in the solution. The dynamic range of the NH4+ ion sensor was 10(-7)--10(-3) M. Urea, adenosine, and asparagine sensors were prepared by coating the surface of the NH4+-ion sensor with urease, adenosine deaminase, and asparaginase membranes, respectively. These enzyme sensors could be used for determining the substrates at the micro mole level. The performance characteristics of these sensors were compared with those previously prepared membrane electrode sensors.