超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

一种具有二维状组装体结构的氢键结合超分子水凝胶的制备

近年来,基于低分子量有机凝胶因子(low molecular mass organic gelators)[1]形成的超分子水凝胶得到了广泛关注.     

Circularly Polarized Absorption Property of Tetra-4[4''''-(2-methylbutoxy)benzoyloxy]phenyl Porphyrin by Introducing Optical Pendant Groups

Circularly polarized luminescent(CPL) materials possess special dissymmetric optical property, i.e. luminescent light having different intensities for left (L) and right(R) circularly polarized components. Recently, these materials have been applied in colour-image projection, stereoscopic displays and light-emitting diodes(LEDS)1-7. We have synthesized a new porphyrin derivative, tetra-4[4'-(2-methylbutoxy)benzoyloxy] phenyl porphyrin [T(MBBP)P], by introducing a chiral group, which p…     

含L－氨基酸结构的手性液晶化合物的合成及其相变行为

合成了９种具Ｌ－氨基酸衍生物结构的介晶化合物（Ｉ－Ⅲ，Ⅳａｂ，Ⅴａ，ｂ，Ⅵａ，ｂ）、４种氨基酸衍生物（Ａ１－４）和６种介晶化合物（Ｍ１－６）．新化合物（Ⅰ－Ⅲ，Ⅳａ，ｂ，Ⅴａ，ｂ，Ⅵａ，ｂ，Ａ４，Ｍ３－６）的化学结构通过ＩＲ、１ＨＮＭＲ和元素分析证实；并用偏光显微观察和ＤＳＣ分析研究了其相变行为，结果表明有８种化合物（Ｍ３－６，Ⅵａ，ｂ，Ⅴｂ，Ⅵｂ）呈现液晶相变。测定了它们的比旋光度。通过Ｘ射线衍射研究了化合物Ⅵｈ１２０～１３０℃和Ⅵｂ１７０～１８０℃的近晶结构，Ⅵｂ显，Ⅵｂ呈。测定了化合物Ⅳｂ的电滞回线，证明其具铁电性。     

砷配合物的固相合成、表征及抑菌活性研究

一些砷、锑的配合物具有抗癌、杀菌等生物功能[1,2],可用于药物研究.近年来,用砷剂(主要是三氧化二砷)治疗急性早幼粒细胞白血病(APL),具有缓解率高而复发率低的优点,引起世人的关注.因砒霜中仅含氧和砷,起药物作用的实际是砷(Ⅲ).因此,选择有生物功能的配体合成新型砷配合物对治疗白血病可能有一定药物作用.由于砷的无机盐易水解,故合成砷的生物配合物很困难,对砷配合物的研究也很少报道 [3-7].本文用异烟肼、L-苯丙氨酸和三碘化砷通过室温固相反应合成了两种未见报道的砷配合物,经元素分析,紫外光谱,X-射线粉末衍射,中、远红外光谱和热重差热分析确定了配合物的化学组成,并对配合物的抑菌活性进行了研究.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

PEG作为成孔剂对聚(N-异丙基丙烯酰胺-co-丙烯酸)水凝胶性能的影响

以PEG400,1000,6000为成孔剂,合成了一系列聚(N-异丙基丙烯酰胺co丙烯酸)水凝胶,研究了成孔剂分子量和数量对凝胶性能的影响.结果表明,聚乙二醇(PEG)分子充当成孔剂,不参与反应.PEG分子量越大,投料越多,所得凝胶孔的孔径越大,孔数目越多,在室温时可以容纳更多的水分子,因而溶胀率也越大.凝胶的大孔结构有利于水分子的进出,所以响应速率比普通共聚凝胶快.随着PEG分子量增大,孔数目增多,响应速率相应变快.     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.