直接酯化法合成PET反应条件对树脂结晶速率的影响

用直接酯化法合成了聚对苯二甲酸乙二酯（ＰＥＴ）。对缩聚反应温度、真空度及稳定剂等合条件对产物结晶速率的影响进行了研究。以ΔＴｃ＝Ｔｃ－Ｔｇ和ΔＴｃｏ＝Ｔｃｏ－Ｔｇ表征样品的结晶速率。结果表明，真空度一定，反应温度高则样品结晶速率慢；温度一定，真空度高样品结晶速率也慢。这两个因素的影响均是不可忽视的。     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

离子色谱法测定水样中氯离子的测量不确定度评定

分析了离子色谱法测定水样中氯离子不确定度的来源,包括标准系列配制引入的不确定度、标准系列浓度-峰面积拟合直线引入的不确定度、样品稀释引入的不确定度,计算了不确定度分量及合成不确定度,扩展不确定度为5.6%。     

Water soluble luminescent platinum terpyridine complexes with glycosylated acetylide and arylacetylide ligands: photoluminescent properties and cytotoxicities

Platinum(II) terpyridine complexes with glycosylated acetylide and arylacetylide ligands bind to DNA with binding constants approximately 10(5) mol(-1) dm(3); the glycosylated arylacetylide complexes exhibit emission at lambda(max) approximately 620 nm in water and are up to approximately 100-times higher in potency than the clinical cisplatin drug in killing cancer cells.     

Icosahedral gold cage clusters: M@Au12- (M=V, Nb, and Ta)

We report the observation and characterization of a series of stable bimetallic 18-valence-electron clusters containing a highly symmetric 12-atom icosahedral Au cage with an encapsulated central heteroatom of Group VB transition metals, M@Au(12) (-) (M=V,Nb,Ta). Electronic and structural properties of these clusters were probed by anion photoelectron spectroscopy and theoretical calculations. Characteristics of the M@Au(12) (-) species include their remarkably high binding energies and relatively simple spectral features, which reflect their high symmetry and stability. The adiabatic electronic binding energies of M@Au(12) (-) were measured to be 3.70+/-0.03, 3.77+/-0.03, and 3.76+/-0.03 eV for M=V, Nb, and Ta, respectively. Comparison of density-functional calculations with experimental data established the highly symmetric icosahedral structures for the 18-electron cluster anions, which may be promising building blocks for cluster-assembled nanomaterials in the form of stoichiometric [M@Au(12) (-)]X(+) salts.     

优化几何构型对高级别从头算能量的影响

对《ＣＲＣ物理与化学手册》（第７７版）中第三周期以前的无机双原子分子,当其理论优化构型的相对误差大于２％时,分别在实验构型和最大偏差的理论构型下,计算了ＱＣＩＳＤ（Ｔ）／６－３１１＋Ｇ（３ｄｆ,２ｐ）能量并作了比较。结果表明,大多数能量的差别在４．２ｋＪ．ｍｏｌ＾－１以内。由此说明,目前一般采用的构型优化理论方法,多数情况下不至于明显影响单点高级别从头算的计算精度。同时还发现,Ｇ２（ＱＣＩ）的高级     

Recyclable self-assembly-supported catalytic system for orthoalkylation

[reaction: see text] A new recyclable supported catalyst system for orthoalkylation was devised using a self-assembly consisting of the barbiturate and 2,4,6-triaminopyrimidine H-bonding motifs. At high temperature, the system is completely homogeneous so as to give an efficient catalytic activity, while it is heterogenized at room temperature to form an insoluble solid phase for the easy recovery of the catalyst after the reaction.     

Surface modulation of magnetic nanocrystals in the development of highly efficient magnetic resonance probes for intracellular labeling

High-quality biocompatible magnetic iron oxide (Fe3O4) nanocrystals were developed through a ligand exchange process of hydrophobically capped nanocrystals with hydrophilic molecules. By simple modulation of the nanocrystal surface ligand charge properties, we have been able to prepare magnetic nanocrystals with excellent intracellular labeling capabilities that efficiently label a variety of cell types without the need for additional transport facilitating agents. The excellent intracellular labeling capability of the newly developed cationic WSIO has further led to successful MRI monitoring of the migration of neural stem cells in rat spinal cord. The magnetic nanocrystals developed here have great potential in applications for labeling of various cell types and also the monitoring of cell-based medical treatments and cancer metastasis.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．