Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Photo-induced control of bubble domains in chiral–nematic liquid crystal by a violet laser beam

The stable bubble domains generated by mixing 10% of chiral molecules into an azobenzene liquid crystal (LC)-doped nematic host can be optically controlled by a violet laser beam (415 nm). The photon-induced reversible trans–cis photo-isomerisation of azobenzene changes the helical twisting power (HTP) of LC mixtures in which the HTP of cis-azobenzene LC is lower than trans-azobenzene LC. Under the irradiation of an optical field (>20 mW cm^???2), the helical pitch distance, which is inverted proportional to the HTP, increases and the bubble domains disappear. Immediate obstruction of laser light irradiation initiates cholesteric nucleation, merging of domains and the subsequent generation of stably dispersed bubble domains.     

Development and validation of an ELISA kit for the detection of ricin toxins from biological specimens and environmental samples

Ricin is a toxin that can be easily extracted from seeds of Ricinus communis plants. Ricin is considered to be a major bio-threat as it can be freely and easily acquired in large quantities. A deliberate release of such toxin in civilian populations would very likely overwhelm existing public health systems, resulting in public fear and social unrest. There is currently no commercially available or FDA-approved prophylaxis such as vaccines, or therapeutic antitoxins or antidotes, available for ricin intoxication. Patient treatment is typically supportive care based on symptoms, often designed to reinforce the body’s natural response. This paper describes the development and validation of a robust ELISA test kit, which can be used to screen for ricin in biological specimens such as whole blood and faeces. Faecal specimens are shown in this study to have better diagnostic sensitivity and a wider diagnostic window compared to whole blood. From these results, it is concluded that faeces is the most suitable clinical specimen for diagnosis of ricin poisoning via the oral route. The ELISA test kit can also detect ricin in environmental samples. An advantage of this ELISA kit over other commercial off-the-shelf (COTS) detection kits currently on the market that are developed to screen environmental samples only is its ability to diagnose ricin poisoning from clinical specimens as well as detect ricin from environmental samples.     

Cascade One‐Pot Synthesis of Orange‐Red‐Fluorescent Polycyclic Cinnolino[2,3‐f]phenanthridin‐9‐ium Salts by Palladium(II)‐Catalyzed C−H Bond Activation of 2‐Azobiaryl Compounds and Alkenes

Quaternary ammonium salts were synthesized in moderate to good yields through double oxidative C?H bond activation on azobenzenes. The mechanism of the highly regioselective reaction of 2‐azobiaryls with alkenes to give orange‐red‐fluorescent cinnolino[2,3‐f]phenanthridin‐9‐ium salts and 15H‐cinnolino[2,3‐f]phenanthridin‐9‐ium‐10‐ide is proposed to involve ortho C?H olefination of the 2‐azobiaryl compound with the alkene, intramolecular aza‐Michael addition, concerted metalation–deprotonation (CMD), reductive elimination, and oxidation.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

Gas chromatographic analysis of the thermally unstable dimethyl methylphosphonate carbanion via trimethylsilyl derivatization

An HPLC method to quantitate phytometallophores (phytosiderophores) exuded from roots of barley (Hordeum vulgare L.) growing in nutrient solution culture was developed. 9-Fluorenylmethyl chloroformate (FMOC) derivatives of phytometallophores were separated on a C18 reverse-phase column using a sodium acetate (pH 7.2) and acetonitrile-methanol gradient over 20 min followed by fluorescence detection. Detection limits ranged from 15 to 370 pmol depending on the particular phytometallophore. The effectiveness of this method was demonstrated using the response of barley seedlings to Fe-sufficient and Fe-deficient nutrient solution conditions. Phytometallophores collected in root washings of Fe-deficient barley seedlings increased with plant age while phytometallophore release from Fe-adequate roots was negligible.     

Spectrophotometric determination of deacetylation degree of chitinous materials dissolved in phosphoric acid

A simple spectrophotometric method is proposed for determining deacetylation degrees (DD) of chitinous materials using phosphoric acid as the UV-transparent solvent system. Calibrating by the extinction coefficients (A(210)) of D-glucosamine and N-acetyl-D-glucosamine, DD values (24-88%) were computed numerically. The results correlated well (R(2) = 0.9805, n = 50) with those obtained by solid-state (13)C NMR. Comparison of the results obtained by the proposed UV method and solid-state (13)C NMR.     

Temperature dependent responsivity of quantum dot infrared photodetectors

Temperature dependent behavior of the responsivity of InAs/GaAs quantum dot infrared photodetectors was investigated with detailed measurement of the current gain. The current gain varied about two orders of magnitude with 100 K temperature change. Meanwhile, the change in quantum efficiency is within a factor of 10. The dramatic change of the current gain is explained by the repulsive coulomb potential of the extra carriers in the QDs. With the measured current gain, the extra carrier number in QDs was calculated. More than one electron per QD could be captured as the dark current increases at 150 K. The extra electrons in the QDs elevated the Fermi level and changed the quantum efficiency of the QDIPs. The temperature dependence of the responsivity was qualitatively explained with the extra electrons.