Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

Mössbauer Studies on Spin State of the Thermal Decomposition of Substituted Tris (2-Pyridylimine) Iron (II) Thiocyanate

The spin states of iron (II) in FeL₂(NCS)₂ produced from the thermal decomposition of FeL₈(NCS)₂ (L=2-py-CR₁=NR₂, R₁ or R₂=H, Me(CH₃), Ph) under nitrogen atmosphere are investigated by means of Mössbauer spectroscopy and magnetic measurements. It was found that the spin states of iron (II) in substitutited bis (2-pyridylimine) iron (II) thiocyanate are included: intermediate-spin (³T₁, S=1), mixed-spin of ⁵T₂(S=2)+³T₁ and spin incomplete transition of ⁵T₂?³T₁.     

Simultaneous determination of uric acid and creatinine in urine by an eco-friendly solvent-free high performance liquid chromatographic method

A simple, rapid, and eco-friendly analytical method for simultaneous determination of uric acid and creatinine in urine applying high performance liquid chromatography (HPLC) is described. After dilution, de-protein, and filtration, the sample solution was injected to separate the species with C-18 column by an eluent containing 0.05 M ammonium phosphate buffer at pH 7.4. An UV detector was used to monitor the separation of species at 235 nm. Optimum conditions for separation and detection were investigated. Results indicated that under optimized condition measurements were achieved within 13 min. The detection limits were 0.127 and 0.156 mug ml(-1) for uric acid and creatinine respectively. The recovery was 95% (0.57% RSD) for uric acid and 99.2% (0.98% RSD) for creatinine, from five measurements. Real urine specimens were tested.     

Synthesis and properties of novel poly(amide-imide)s containing pendent diphenylamino groups

A new dicarboxylic acid, 2,4-bis(N-trimellitoyl)triphenylamine, bearing two preformed imide rings was synthesized from the condensation of 2,4-diaminotriphenylamine and trimellitic anhydride at 1:2 molar ratio. A series of poly(amide-imide)s (PAIs) with inherent viscosities of 0.38-0.66 dl/g were prepared by triphenyl phosphite-activated polycondensation from the diimide-dicarboxylic acid with various aromatic diamines. All the resulting PAIs were readily soluble in a variety of organic solvents and formed strong and tough films via solution casting. These PAIs have useful levels of thermal stability associated with moderately high glass-transition temperatures (259-314 °C) and 10% weight loss temperatures in excess of 530 °C in nitrogen or in air.     

Optimizing Multi-stage Production for an Assembly-Type Supply Chain with Unequal Sized Batch Shipments

This paper studies the multi-stage logistics and inventory problem in an?assembly-type supply chain where a uniform lot size is produced uninterruptedly with a single setup at each stage. Partial lots, or sub-batches, can be transported to next stage upon completion. Unequal sub-batch sizes at each stage follow geometric series and the numbers of sub-batches across stages are allowed to be different. Since the mainline and each branch line of an assembly-type supply chain are series-type supply chains, a model of the series-type supply chain is first established and a model of the assembly-type supply chain is subsequently developed. Optimization algorithms that determine the economic lot sizes, the optimal sub-batch sizes and the number of sub-batches for each stage are developed. The polynomial-time algorithms incorporate the optimality properties derived in the paper to find the lower and upper bounds of the solutions by constructing the solution ranges and then the optimal solutions accordingly.     

Nitro-oxidized carboxycellulose nanofibers from moringa plant: effective bioadsorbent for mercury removal

Cellulose - Mercury contamination in drinking water is a worldwide problem due to its severely harming effects on the human body. A nanostructured natural bioadsorbent, carboxycellulose nanofiber...     

Relaxing the hypotheses of Bielak–MacCamy’s BEM–FEM coupling

In this paper we show that the quasi-symmetric coupling of finite and boundary elements of Bielak and MacCamy can be freed of two very restricting hypotheses that appeared in the original paper: the coupling boundary can be taken polygonal/polyhedral and coupling can be done using the normal stress instead of the pseudostress. We will do this by first considering a model problem associated to the Yukawa equation, where we prove how compactness arguments can be avoided to show stability of Galerkin discretizations of a coupled system in the style of Bielak–MacCamy’s. We also show how discretization properties are robust in the continuation parameter that appears in the formulation. This analysis is carried out using a new and very simplified proof of the ellipticity of the Johnson–Nédélec BEM–FEM coupling operator. Finally, we show how to apply the techniques that we have fully developed in the model problem to the linear elasticity system.     

Solution‐processable transmissive‐to‐green switching electrochromic polyamides bearing 2,7‐bis(diphenylamino)naphthalene units

A new 2,7‐bis(diphenylamino)naphthalene‐based diamine monomer, N,N′‐bis(4‐aminophenyl)‐N,N′‐bis(4‐methoxyphenyl)‐2,7‐naphthalenediamine, was synthesized and polymerized with various aromatic dicarboxylic acids via the phosphorylation polyamidation reaction leading to a new series of redox‐active and electrochromic aromatic polyamides. The polyamides exhibited high solubility in many polar aprotic solvents, good film‐forming ability, and high thermal stability. They also showed stable electrochemical stability and anodically green coloring when oxidized. The two arylamino centers showed a weak electronic interaction via the 2,7‐naphthalenediyl bridge, and thus they started to oxidize almost at the same time. No intervalence charge transfer (IVCT) absorption was observed during the oxidation processes of these polyamides. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1409–1421