Influence of an Oxidising Impurity on Preparation of 2-Lithio-1,3-dithiane: Isolation of bis[2-d,3-Dithianyl)]methanol

Bis-dithianylalkanols and dimers are formed in preparation of 2-lithio-1,3-dithianes due to the presence of oxidising impurity in n-BuLi (perhaps n-BuOOLi).     

Confinement and controlled release of quinine on chitosan–montmorillonite bionanocomposites

To accomplish the controlled‐release systems based on layered clay minerals, one of the best ways is to intercalate organic molecules into the interlayer gallery of clay minerals. Into a series of chitosan (CS) intercalated montmorillonite (MMT) nanocomposites, prepared via ion‐exchange route, antimalarial drug [quinine (QUI)] was loaded to act as effective drug delivery systems. Among the CS–MMT nanocomposites, higher drug adsorption with decreasing CS concentration was observed. CS–MMT and CS–MMT/QUI intercalated compounds were characterized by powder X‐ray diffraction, Fourier transform infrared spectroscopy, and thermal analysis. The synthesized nanocomposites, filled in the gelatin capsules followed by coating of Eudragit® L 100, were tested for in vitro drug release performance in the sequential buffer environments at 37 ± 0.5 °C. As no drug release (0%) was observed in the gastric fluid, the coating of Eudragit® L 100 to the capsules is highly adequate. However, the drug release rate was comparatively faster from the CS intercalated clay with compare with pure clay. The drug release kinetic data revealed that the release of QUI from the nanocomposites can be explained by modified Freundlich model. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Interactions with herring sperm DNA and biological studies of sparfloxacin drug‐based copper(II) compounds

Copper(II) complexes of the type [Cu(SPF)(Lⁿ)Cl] (where SPF is sparfloxacin and Lⁿ = substituted terpyridines) were synthesized and found to have a distorted octahedral geometry. Superoxide dismutase‐like activity of the complexes was measured using a nitroblue tetrazolium/reduced nicotinamide adenine dinucleotide/phenazine methosulfate system and expressed in terms of the concentration of complex which terminates the formation of formazan by 50% (IC₅₀ value), which was found to range from 0.572 to 1.522 µm . Interactions of the complexes with herring sperm DNA were studied by absorption titration, viscosity measurement and gel electrophoresis under physiological conditions. The antimicrobial efficiency of the complexes was tested against five different microorganisms and showed good biological activity. All the complexes showed good cytotoxic activity, with LC₅₀ values ranging from 4.01 to 9.64 µg ml^?1. Copyright © 2012 John Wiley & Sons, Ltd.     

Formation of bamboo-shaped carbon nanotubes on carbon black in a fluidized bed

For the first time, bamboo-shaped multiwalled carbon nanotubes, having diameter of the order of 50 nm, have been grown on carbon black in a fluidized bed in bulk amount. The activation energy for the synthesis of the product was found out to be around 33 kJ/mol in the temperature range of 700−900 °C. The carbon nanotubes were separated from the carbon black by preferential oxidation of the later, the temperature of which was determined by thermogravimetry. The transmission electron microscopy revealed different features of the nanotubes such as “Y” junction, bend, and catalyst filling inside the nanotubes. Small angle neutron scattering was performed on the nanotubes synthesized at different temperatures. The data were fitted into a suitable model in order to find out the average diameter, which decreases with increase in synthesis temperature. The Monte Carlo simulation predicts the same behavior. Based on the above observations, a possible growth mechanism has been predicted. The oscillation in carbon saturation value inside the catalyst in the fluidized bed has been indicated as the responsible factor for the bamboo-shaped structure.     

Behaviour of ‘free-standing’ hollow Au nanocages at finite temperatures: a BOMD study

Finite-temperature behaviour of a hollow golden cage (HGC) plays a crucialrole in its potential applications as a catalyst, drug delivery agent, contrasting agent and so on. This physico-chemical property of HGCs is not well understood so far. In that context, Born–Oppenheimer molecular dynamics (BOMD) simulations are performed on a well-known ‘free-standing’ HGC. The cluster considered in this study is the ground state Au₁₈ cluster (a cage with a diameter of about >5.5 Å). The results thus obtained are compared with the BOMD simulation results reported earlier on Au₃₂ icosahedron cage, a conformation with a diameter of nearly. The sphericity of both the clusters is studied using a shape deformation parameter as a function of time and temperature. These results are supplemented by radial distribution function at various temperatures. The observations and analysis of results indicate that, both the clusters retain an HGC conformation from 300 to 400 K, admitting structural fluxionality by the Au₁₈ cluster. Remarkably, the Au₁₈ cluster is able to maintain its hollowness and sphericity up to a high temperature of 1000 K. Underlying structural and electronic properties influencing the individualistic behaviour of cages are highlighted. Composition of the frontier molecular orbitals and the charge distribution play a crucial role in the finite-temperature behaviour of the Au cages. The conclusions are supplemented by supporting calculations on another degenerate ground state Au₁₈ hollow cage and a well-known pyramidal Au₁₈ cage at 300 and 400 K.     

SYNTHESIS OF SOME SULFUR-CONTAINING SPIROINDOLE DERIVATIVES

Abstract

The synthesis of some new sulfur-containing spiroindole derivatives is reported. Fluorinated 3′-aryl-2′-phenylimino-spiro[3H-indole-3,6′[4,5′-pyrazolin][4,3-d]thiazolo]2(1H)-ones were prepared by the reaction of 5-(2-oxo-3-indolinylidene)-3-aryl-2-phenylimino-4-thiazolidinones with hydrazine hydrate. The compounds have been characterized on the basis of elemental and spectral studies.     

Synthesis,Characterization, and Biological Screening of Some Novel Thiazolidin-4-One and α-Aminophosphonate Derivatives

Abstract

Synthesis of some new functionalized thiazolidin-4-ones and α-amino phosphonate derivatives has been reported. The imines were synthesized from the reaction of various substituted anilines with 1-phenyl-3-(pyridine-4-yl)-1H-pyrazole-4-carbaldehyde in ethanol at reflux condition. The corresponding thiazolidin-4-ones and α-aminophosphonates were prepared by reaction of imines with mercaptoacetic acid and triethyl phosphite, respectively. The structures of the newly synthesized compounds were confirmed by IR, ¹H NMR, and mass spectral data and were evaluated for their antimicrobial activities.

GRAPHICAL ABSTRACT      

p-Hydroxybenzoic Acid-Urea-Formaldehyde Copolymers and Their Ion-Exchange Properties

Copolymers (PUF) were synthesized by the condensation of p-hydroxybenzoic acid (P), urea (U), and formaldehyde (F), in the presence of different acidic catalysts and using varied molar ratios of reacting monomers. One of the copolymers having the highest molecular weight was fractionated. Copolymer compositions have been determined on the basis of their elemental analysis and conductometric titrations in the nonaqueous phase. Molecular weights (M_n) have been estimated by VPO. Copolymer prepared by using the stoichiometric properties of the monomers and HCI as catalyst furnished the highest molecular weight (M_n). The viscosity measurements carried out in DMF indicate normal behavior. TGA and DSC data were analyzed to compare the relative thermal stability and estimate the characteristic parameters. IR spectra were studied to elucidate the structure. Chelation ion-exchange properties have also been studied employing the batch equilibration method. The order of selectivity of metal ions by the copolymers is UO₂ ²⁺ > Fe³⁺ >Cu²⁺ > Co²⁺.