Anion substitution effects on structure and magnetism in the chromium chalcogenide Cr5Te8—Part I: Cluster glass behavior in trigonal Cr(1+x)Q2 with basic cell (Q=Te, Se; Te:Se=7:1)

The effect of substitution of the anion Te by Se in non-stoichiometric Cr₅Te₈ has been investigated with respect to its crystal structure, magnetic properties, and electronic structure. The compounds Cr_(1+x)Q₂ (Q=Te, Se; Te:Se=7:1; (1+x)=1.234(6), 1.264(6), 1.300(7)) were synthesized at elevated temperatures followed by quenching the samples to room temperature. The crystal structures have been refined with X-ray powder diffraction data with the Rietveld method in the trigonal space group with lattice parameters a=3.8651(1)-3.8831(1) Å and c=5.9917(2)-6.0528(2) Å. The structure is related to the NiAs structure with full and deficient metal layers stacking alternatively along the c-axis. The irreversibility in the field-cooled/zero-field-cooled magnetization suggests that the substitution effects of one Te by one Se is strong enough to cause cluster-glass behavior, from ferromagnetic Cr₅Te₈ to cluster-glass Cr_(1+x)Q₂. Non-saturation magnetizations at 5.5 T and the magnetic relaxation results further support the existence of cluster-glass behavior. Accompanying SPR-KKR (spin-polarized relativistic Korringa-Kohn-Rostoker) band structure calculations strongly support the observation that the Cr(1) sites are preferentially occupied by Cr atoms and predict that these compounds are metallic. Results for the spin-resolved DOS and magnetic moments on each crystallographic sites are presented.     

Cytochrome-c detection

Following a myocardial infarction (MI) cells die or are damaged and their contents leak into the blood circulation, resulting in elevated serum levels of various enzymes, proteins, and organic molecules. Over the past few decades, it has become standard practice to employ the detection of these elevated substances as markers for the confirmation of MIs and to monitor MI patients’ response to treatment. Although it has previously been shown that cytochrome-c, a small respiratory protein, is among those elevated, the lack of a suitable detection system has prevented its routine use in the diagnosis of MIs. We present a preliminary study in which chemiluminescence was employed to detect elevated levels of cytochrome-c in the serum of MI patients. The technique, which is specific for c-type proteins, is approx 30 times more sensitive than the traditional Coomassie blue stain and can detect as little as 0.03 μg of protein. It also has potential for diagnostic use in other diseases that are characterized by mitochondrial damage.     

Synthesis and antifolate activity of 8,10-dideazaminopterin

A synthesis of 8,10-dideazaminopterin, using 2,4-diamino-6-bromomethyl-8-deazapteridine ( 2 ) as a key intermediate, is described. Condensation of the triphenylphosphinylide derived from 2 with p-formylbenzoyl-L-glutamate afforded a 9,10-dehydro-8,10-dideazaminopterin ester intermediate 5 . Hydrogenation of the olefinic linkage and subsequent hydrolysis of the glutamate ester gave the title compound. 8,10-Dideazaminopterin was a potent growth inhibitor of folate dependent bacteria. It was 16 times more potent then methotrexate as an inhibitor of dihydrofolate reductase derived from L1210 leukemia cells, and showed strong activity against L1210 in mice.     

Synthesis and characterization of polymers produced by horseradish peroxidase in dioxane

Polymers were synthesized from substituted phenolic and aromatic amine compounds with hydrogen peroxide as the source of an oxidizing agent and horseradish peroxidase enzyme as the catalyst. The polymerization reaction was carried out in a monophasic organic solvent with small amounts of water at room temperature. Conditions for the synthesis of polymers with respect to reaction time and yield were studied with a number of monomers at different concentrations and in solvents with different buffers with pH range of 5.0–7.5. Physical and chemical properties of these homo-and copolymers were determined with respect to melting point, solubility, elemental analysis, molecular weight distribution, infrared absorption (including FTIR), solid-state ¹³C nuclear magnetic resonance, thermal gravimetric analysis, and differential scanning calorimetry. The enzyme catalyzed reactions produced polymers of molecular weight greater than 400,000 which were further fractionated by differential solubility in solvent mixtures and the molecular weight distribution of the polymer fractions were determined. In general, the polymers synthesized have low solubilities, high melting points, and some degree of branching.     

Evaluation of an Economical Sunlamp that Emits a Near Solar UV Power Spectrum for Conducting Photoimmunological and Sunscreen Immune Protection Studies

Expense and inconvenience have restricted the use of the filtered xenon are lamp (solar simulator) as a UV source for conducting large-scale animal studies. Because sunscreen immunoprotective levels are significantly affected by the UV power spectrum of the source it is imperative that a solar simulating source be used for accurate measurements of sunscreen protection levels that are relevant to human UV exposures from sunlight. However, relatively inexpensive sunlamps, e. g. the UVA-340, that emit a UV power spectrum similar to that of a solar simulator are available. Unlike FS-type UVB sunlamps, which have a significant amount of effective immunosuppressive nonsolar UV energy at wavelengths below 295 nm, the immunosuppression effectiveness spectrum of UVA-340 sunlamps was nearly identical to that of a solar simulator. The purpose of this study was to evaluate this sunlamp for conducting photoimmunological and sunscreen immune protection studies. Groups of C3H mice were exposed to a range of UVA-340 sunlamp doses (0.25 KJ/m² to 20.0 KJ/m²) to establish a dose-response curve and determine the minimum immune suppression dose (MISD) for induction of local-type suppression of contact hypersensitivity (CH). The MISD, defined as the lowest UV dose given to produce ～50% suppression of the CH response in mice, was determined to be 1.0 kJ/m² for UVA-340 sunlamps. Immune protection tests on four marketed sunscreen lotions (sun protection factors [SPF] 4, 8, 15 and 30) were then conducted with UVA-340 sunlamps using MISD as the endpoint. The immune protection factors for these sunscreens were equivalent to the level of protection predicated by their labeled SPF. These results are similar to those we have previously obtained using a solar simulator. We conclude from these data that the immunosuppressive effects of UVA-340 sunlamps are similar to those of a solar simulator; however, further studies are needed to determine if UVA-340, or similar, sunlamps are a viable alternative to the solar simulator for conducting large-scale animal experiments that require a relevant UV solar spectrum.     

Solid-phase synthesis using a new polyacrylic resin : Synthesis of the fragment 14–21 of the amino acid sequence of histone H4

The solid-phase synthesis of the octapeptide 1 AcGly-Ala-Lys-Arg-His-Arg-Lys-ValOMe, which represents the fragment 14-21 of the amino acid sequence of the chromosomal histone H4, as well as of the structurally related nonapeptide 2 AcGly-Ala-Lys-Leu-Arg-His-Arg-Lys-ValOMe, is described using a new polyacrylic resin containing a glycolamide ester linkage(resin-NHCO-CH₂-OCO-peptide) acting as a labile anchoring moiety between the resin and the peptide.After elongation of the polypeptide chain using classical protecting groups, i.e. t-butyloxycarbonyl for the α-NH₂ function, benzyloxycarbonyl, nitro and 2,4-dinitrophenyl groups for the side-chains of Lys, Arg and His respectively, both peptides 1 and 2 were obtained in good yields and with a high purity as shown by high-pressure liquid chromatography, by amino-acid analysis and by high-field proton NMR spectroscopy.This work demonstrates the ability of the newly introduced polyacrylic resin to act as a convenient support for solid-phase peptide synthesis.     

Multiparametric microsensor chips for screening applications

The identification of drug targets for pharmaceutical screening can be greatly accelerated by gene databases and expression studies. The identification of leading compounds from growing libraries is realized by high throughput screening platforms. Subsequently, for optimization and validation of identified leading compounds studies of their functionality have to be carried out, and just these functionality tests are a limiting factor. A rigorous preselection of identified compounds by in vitro cellular screening is necessary prior to using the drug candidates for the further time consuming and expensive stage, e.g. in animal models. Our efforts are focused to the parallel development, adaptation and integration of different microelectronic sensors into miniaturized biochips for a multiparametric, functional on-line analysis of living cells in physiologically environments. Parallel and on-line acquisition of data related to different cellular targets is required for advanced stages of drug screening and for economizing animal tests.     

Direct determination of calcium,copper, iron,magnesium, manganese and zinc in amniotic fluid samples using inductively coupled plasma-atomic emission spectrometry

An inductively coupled plasma-atomic emission spectrometric method is reported for the determination of calcium, copper, iron, manganese, magnesium and zinc. Samples are introduced directly when a sheath gas device is used. An external calibration procedure is used. The standards are prepared in a matrix composed of 0.5% (w/v) albumin and 0.76% (w/v) sodium chloride. The procedure was evaluated with a standard reference material (NBS SRM 909 Human Serum); all the values obtained are in agreement with the certified values. Results obtained for the determination of zinc, calcium, magnesium, copper, iron and manganese in amniotic fluid samples are reported.     

Functional polymers and sequential copolymers by phase transfer catalysis. XXVIII. Synthesis and characterization of alternating block copolymers and polyformals of polyisobutylene and aromatic polyether sulfone

Alternating—i.e., -(A-B)_n- type—block copolymers of polyisobutylene (PIB) and aromatic polyether sulfone (PSU) have been prepared by phase transfer catalyzed Williamson polyetherification of α,ω-di(phenol)PIB with α,ω-di(chloroallyl)- or -(bromobenzyl)PSU. Block copolymers of the two prepolymers were also synthesized by the phase transfer catalyzed polyetherification of methylene chloride with α,ω-di(phenol)PIB and α,ω-di(phenol)PSU (bisphenol-A-terminated PSU). This method leads to -[(A)_x-(B)_y]_n- block copolymers with formal linkages between segments. At sufficiently high segment lengths, both types of block copolymers exhibit two distinct T_gs, indicating phase separation into rubbery PIB and glassy PSU domains.     

Recherches sur la formation et la transformation des esters LXXXI [1]. Sur la réaction d'isothiocyanates avec l'acide hydrazinoéthylphosphorique,et de l'isocyanate de phényle avec l'acide colaminephosphoreux

Hydrazinoethyl phosphoric monoester has been prepared by reacting hydrazinoethanol with polyphosphoric acid, and isolated as di-sodium salt. Sodium hydrazinoethyl phosphate reacts with phenylisothiocyanate (in H₂O+ethanol) to yield mainly the derivative thiocarbamoylated at the substituted nitrogen atom. This derivative, heated for one night at 100° in 0.5 N HCl, is cyclized to 3-amino-2-phenylimino-thiazolidine in 62% yield. Sodium hydrazinoethyl phosphate reacts with o-methoxycarbonylphenyl isothiocyanate (in H₂O+dioxane) at the unsubstituted nitrogen atom to yield mainly the corresponding quinazoline derivative (IV, X = OPO₃Na₂). This derivative, heated for one night at 100° in 0.5 N HCl, is cyclized to 2-o-carboxyphenylamino-dihydro-δ²-1, 3, 4-thiadiazine (Va) in 55% yield (hydrolysis of the lactamic function as well). Aminoethyl phosphorous monoester (colaminephosphorous acid) reacted with phenylisocyanate (in H₂0+dioxane) in slightly alkaline medium (one equivalent of NaOH) yields sodium N-phenylcarbamoylaminoethyl phosphite. Refluxed for 20 minutes in 1N NaOH, this carbamoyl derivative is not cyclized but only hydrolyzed to the open-chained N-phenyl-N′-hydroxyethylurea (VII).