Hawaiian plant studies. XIV. Alkaloids of Ochrosia sandwicensis A. Gray

Two quaternary alkaloids were isolated from Ochrosia sandwicensis A. Gray. One was shown to be hunterburnine -methochloride (I), while the other has been named ochrosandwine and its probable structure is 10-hydroxydihydrocorynantheol methochloride (II). The stereochemistry of the related alkaloid huntrabrine methochloride (IV) is elaborated. Two previously isolated yellow Ochrosia bases were shown to be ellipticine hydrochloride and methoxyellipticine for which the structure-8-methoxyellipticine (V) is suggested. A rapid separation of alkaloids from plant material is described, which involves extraction with hot dilute acetic acid, precipitation with Mayer's reagent and conversion of the complex to the chlorides by anion exchange.     

Ditungsten Siloxide Hydrides, [(silox)(2)WH(n)()](2) (n = 1, 2; silox = (t)BuSiO), and Related Complexes

The addition of 4.0 equiv of Na(silox) to Na[W(2)Cl(7)(THF)(5)] afforded (silox)(2)ClW&tbd1;WCl(silox)(2) (1, 65%). Treatment of 1 with 2.0 equiv of MeMgBr in Et(2)O provided (silox)(2)MeW&tbd1;WMe(silox)(2) (2, 81%). In the presence of 1 atm of H(2), reduction of 1 with 2.0 equiv of Na/Hg in DME provided (silox)(2)HW&tbd1;WH(silox)(2) (3, 70%), characterized by a hydride resonance at delta 19.69 (J(WH) = 325 Hz, (1)H NMR). Exposure of 2 to 1 atm of H(2) yielded 3 and CH(4) via (silox)(2)HW&tbd1;WMe(silox)(2) (4); use of D(2) led to [(silox)(2)WD](2) (3-d(2)). Exposure of 3 to ethylene ( approximately 1 atm, 25 degrees C) in hexanes generated (silox)(2)EtW&tbd1;WEt(silox)(2) (5), but solutions of 5 reverted to 3 and free C(2)H(4) upon standing. NMR spectral data are consistent with a sterically locked, gauche, C(2) symmetry for 1-5. Thermolysis of 3 at 100 degrees C (4 h) resulted in partial conversion to (silox)(2)HW&tbd1;W(OSi(t)Bu(2)CMe(2)CH(2))(silox) (6a, approximately 60%) and free H(2), while extended thermolysis with degassing (5 d, 70 degrees C) produced a second cyclometalated rotational isomer, 6b (6a:6b approximately 3:1). When left at 25 degrees C (4 h) in sealed NMR tubes, 6 and free H(2) regenerated 3. Reduction of 1 with 2.0 equiv of Na/Hg in DME also afforded 6a (25%). When 3 was exposed to approximately 3 atm of H(2), equilibrium amounts of [(silox)(2)WH(2)](2) (7) were observed by (1)H NMR spectroscopy (3 + H(2) right harpoon over left harpoon 7; 25.9-88.7 degrees C, DeltaH = -9.6(4) kcal/mol, DeltaS = -21(2) eu). Benzene solutions of 3 and 1-3 atm of D(2) revealed incorporation of deuterium into the silox ligands, presumably via intermediate 6. In sealed tubes containing [(silox)(2)WCl](2) (1) and dihydrogen (1-3 atm), (1)H NMR spectral evidence for [(silox)(2)WCl](2)(&mgr;-H)(2) (8) was obtained, suggesting that formation of 3 from 1 proceeded via reduction of 8. Alternatively, 3 may be formed from direct reduction of 1 to give [(silox)(2)W](2) (9), followed by H(2) addition. Hydride chemical shifts for 7 are temperature dependent, varying from delta 1.39 (-70 degrees C, toluene-d(8)), to delta 3.68 (90 degrees C). (29)Si{(1)H} NMR spectra revealed a similar temperature dependence of the silox (delta 12.43, -60 degrees C, to delta 13.64, 45 degrees C) resonances. These effects may arise from thermal population of a low-lying, deltadelta, paramagnetic excited state of D(2)(d)() [(silox)(2)W](2)(&mgr;-H)(4) (DeltaE approximately 2.1 kcal/mol, chi(7a) approximately 0.03), an explanation favored over thermal equilibration with an energetically similar but structurally distinct isomer (e.g., [(silox)(2)WH(2)](2)(&mgr;-H)(2), DeltaG degrees approximately 0.69 kcal/mol, chi(7b) approximately 0.25) on the basis of spectral arguments. Extended Hückel and ab initio molecular orbital calculations on model complexes [(H(3)SiO)(2)W](2)(&mgr;-H)(4) (staggered bridged 7a', EHMO), [(H(3)SiO)(2)WH(2)](2) (all-terminal 7b', EHMO), [(H(3)SiO)(2)W](2) (9', EHMO), (HO)(4)W(2)(H(4)) (staggered-bridged 7", ab initio), and (HO)(4)W(2)(H(4)) (bent-terminal 7, ab initio) generally support the explanation of a thermally accessible excited state and assign 7 a geometry intermediate between the all-terminal and staggered-bridged forms.     

Simultaneous determination of trace concentrations of saturated and α,β-unsaturated carbonyl compounds in organic systems

A method for the simultaneous determination of trace concentrations of saturated and α,β-unsaturated carbonyl compounds in complex systems is presented. Carbonyl as the alkaline 2,4-dinitrophenylhydrazone is determined spectrophotometrically at 2 selected wavelengths of 480 and 426 nm. The apparent total carbonyl concentration is obtained from prepared calibration curves at the selected wavelengths based on known concentrations of n-heptaldehyde. From the observed relative response of known concentrations of n-heptaldehyde and 2-ethyl-2-hexenal, the true concentration for saturated and α,β-unsaturated carbonyl is obtained by a simple calculation. The method has been used extensively for alcohol systems ranging up to tetracontanol but is equally useful for hydrocarbons, aromatic oxygenates and hydrocarbons, petroleum distillates and kerosenes, organic acids and esters, and some ethers.     

Evaluation and validation of the ABI 3700, ABI 3100, and the MegaBACE 1000 capillary array electrophoresis instruments for use with short tandem repeat microsatellite typing in a forensic environment

The demand for high-throughput DNA profiling has increased with the introduction of national DNA databases and has led to the development of automated methods of short tandem repeat (STR) profile production; however, a potential bottleneck still exists at the gel electrophoresis stage. Capillary electrophoresis sequencers capable of processing 96 samples with considerably reduced manual intervention are now available. In this paper, we compare the ABI Prism 377 slab-gel sequencer currently used by the Forensic Science Service with three leading capillary array electrophoresis instruments: the ABI Prism 3700, the Amersham MegaBACE 1000 and the 16-capillary ABI Prism 3100. We describe the experiments used to evaluate and validate these platforms for forensic use with the STR multiplex Ampf/STR SGMplus [1, 2], along with comparative data from the ABI Prism 377 sequencer.     

Using molecular dynamics simulations to identify the key factors responsible for chiral recognition by an amino acid-based molecular micelle

Molecular dynamics (MD) simulations were used to investigate the binding of six chiral compounds to the amino acid-based molecular micelle (MM) poly-(sodium undecyl-(L)-leucine-leucine) or poly(SULL). The MM investigated is used as a chiral selector in capillary electrophoresis. The project goal was to characterize the chiral recognition mechanism in these separations and to move toward predictive models to identify the best amino acid-based MM for a given separation. Poly(SULL) was found to contain six binding sites into which chiral compounds could insert. Four sites had similar sizes, shapes, and electrostatic properties. Enantiomers of alprenolol, propranolol, 1,1′-bi-2-naphthyl-2,2′-diyl hydrogen phosphate, 1,1′-bi-2-naphthol, chlorthalidone, or lorazepam were separately docked into each binding pocket and MD simulations with the resulting intermolecular complexes were performed. Solvent-accessible surface area calculations showed the compounds preferentially associated with binding sites where they penetrated into the MM core and shielded their non-polar atoms from solvent. Furthermore, with five of the six compounds the enantiomer with the most favorable free energy of MM association also experienced the most favorable intermolecular hydrogen bonding interactions with the MM. This result suggests that stereoselective intermolecular hydrogen bonds play an important role in chiral discrimination in separations using amino acid-based MMs.GRAPHICAL ABSTRACT     

Determination of54Mn in foods

⁵⁴Mn is analyzed in complex food ash of high cationic environment. The initial step is an extraction atpH 2.7 with hexane containing di(2-ethylhexyl) phosphoric acid (HDEHP) to complex the⁵⁴Mn and other nuclides. The manganese is reextracted into an alkaline EDTA buffer which is washed with 1% 8-hydroxyquinoline in chloroform containing 5% isoamyl alcohol. The⁵⁴Mn is determined by gamma spectrometry with recoveries ranging from 96.6 to 99.4%.     

Effects of Poly(ethylene glycol) Doping on the Behavior of Pyrene, Rhodamine 6G, and Acrylodan-Labeled Bovine Serum Albumin Sequestered within Tetramethylorthosilane-Derived Sol-Gel-Processed Composites

We investigate the effects of controlled poly(ethylene glycol) (PEG) doping on the behavior of pyrene, rhodamine 6G (R6G), and acrylodan-labeled bovine serum albumin (BSA-Ac) sequestered within tetramethylorthosilicate (TMOS)-derived sol-gel-processed materials. To probe the dipolarity of the local environment within the composite we performed static fluorescence measurements on pyrene as the composites aged. We found that small levels of PEG loading effected significant enhancements in the local dipolarity surrounding the average pyrene molecule. Time-resolved fluorescence anisotropy measurements were used to follow the rotational reorientation dynamics of R6G as the composites aged. As the PEG loading increased, the R6G reorientational mobility increased. Nitrogen adsorption techniques were used to quantify the effects of PEG doping level on the surface area and final xerogel pore features. A large reduction in surface area was observed with PEG doping, but no detectable change in pore size was noted. The effects of PEG doping on a biomolecule were probed by following the time-resolved fluorescence anisotropy decay of BSA-Ac. These results showed that PEG doping resulted in increased biomolecule dynamics relative to that found for a neat, undoped TMOS-derived composites. Together these results show that PEG doping can be used to tune the sol-gel-processed composite dipolarity, alter the mobility of dopants sequestered within the composite, control analyte acessibility to the sensing chemistry, and modulate the internal dynamics within a biodopant.     

A review of the role of DSC analysis in the design of fluorozirconate glasses for fibre optic applications

The relatively poor thermal stability of fluorozirconate glasses is a major factor preventing the realisation of their true potential for fibre optic applications. A range of methods based on both isothermal and non-isothermal DSC techniques, which can be employed to evaluate the thermal stability of fluorozirconate glasses, are described. The relevance of these thermal stability criteria to the design of fluorozirconate compositions capable of yielding high quality optical fibres is discussed.     

Design and synthesis of an isopenicillin N synthase mimic

Towards the aim of creating a functional mimic of isopenicillin N synthase, a small molecule designed to coordinate around iron(II) and model the enzyme active site has been prepared in nine synthetic steps from 2,6-bis(hydroxymethyl)pyridine, (S)-(+)-mandelic acid and pivaldehyde. One aspartate, two histidines and a water ligand in the natural enzyme are replaced by an α-hydroxy acid, pyridine and aniline in the model compound. Additionally, a free thiol designed to simulate the enzyme substrate, δ-(l-α-aminoadipoyl)-l-cysteinyl-d-valine, is linked to the ligand by a three carbon chain. We postulate that in the presence of molecular oxygen, the complex formed between this synthetic ligand and iron(II) will display oxidative chemistry similar to that observed in the active site of isopenicillin N synthase.