INDUSTRIAL NEWS

Interactions between monolayers of trilaurylamine (TLA) and various water-soluble corrosion, hydrate and scale inhibitors, as well as acetic acid and FeCl₂, have been studied by means of the Langmuir technique, The water-soluble compounds were present in the subphase before TLA was spread. Their influence on the monolayer properties were measured by means of surface pressure-area ( k-A) isotherms and constant surface pressure-area relaxation measurements. All the added water soluble species gave rise to monolayer expansion. The monolayer expansion observed for TLA at pH 1, increased when FeCl₂ was added to the subphase at the same pH. Polyethyleneglycols with molecular weight higher than 200 destabilized totally the TLA-monolayer, probably due to bending and folding into multilayers. Monolayer expansion and film instability increased with increased acetic acid concentrations. The destabilization mechanism in this case was most likely due to a combination of nucleation and dissolution of film components into the subphase. The corrosion inhibitor Dyno KI 384 had a higher surface activity than TLA. Hence the monolayer     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Stability of Water/Crude Oil Systems Correlated to the Physicochemical Properties of the Oil Phase

A characterization of 30 crude oils has been performed to determine the relative level of influence that individual parameters have over the overall stability of w/o emulsions. The crude oils have been analyzed with respect to bulk and interfacial properties and the characteristics of their w/o emulsions. The parameters include compositional properties, acidity, spectroscopic signatures in the infrared and near‐infrared region, density, viscosity, molecular weight, interfacial tension, dilational relaxation, droplet size distribution, and stability to gravitationally and electrically induced separation. As expected, a strong covariance between several physicochemical properties was found. Near‐infrared spectroscopy proved to be an effective tool for crude oil analysis. In particular, we have showed the importance of the hydrodynamic resistance to electrically‐induced separation (static) in heavy crude oil‐water emulsions. A rough estimate of the drag forces and dielectrophoretic forces seemed to capture the difference between the 30 crude oils. Given enough time, water‐in‐heavy oil emulsions could be destabilized even at very low electric field magnitude (d.c.). When droplets approach each other in an inhomogeneous electric field, strong dielectrophoretic forces disintegrate the films and result in coalescence. The relative contribution from film stability to the overall emulsion stability may therefore be very different in a gravitational field compared to that in an electrical field.     

Oil-Water Partitioning of a Synthetic Tetracarboxylic Acid as a Function of pH

The oil-water partitioning of a synthetic tetraacid acting as a model compound for indigenous C₈₀-C₈₂ ARN acids has been studied as a function of pH, ionic strength and type of monovalent counterion. Experimental data obtained with ultraviolet-visible and HPLC/UV analyses have been fitted to thermodynamic models based on one, two or four dissociation steps to obtain o/w partition coefficients (K _wo ) of the fully protonated acid between chloroform and aqueous solutions, and its apparent acidity constant(s), pK _a. As the study is conducted above the CMC of the tetraacid, in general high apparent acidity constants were obtained in the range from 6 to 8 resulting from micellization equilibria. K _wo values were obtained in the range from 10^?3 to 10^?4, and decreasing with increasing salinity. At 50 mM K⁺, no conclusions could be made regarding the number of distinguishable dissociation steps, while at higher ionic strength (184 mM and 452 mM K⁺) and at 184 mM Na⁺ a model with two dissociation steps provided good fits to the experimental data. The first step was found to be given by a pK _a ≈ 6.6–6.8 and the second dissociation step at pK _a values ≈ 7.8–8.3. The two-step mechanism supports previous results obtained by potentiometric titrations. No significant difference in the o/w behavior was observed when changing the counterion from potassium to sodium. The main partitioning of the tetraacid in the aqueous phase occurred above pH 8, where the fully deprotonated acid was formed.     

Rapid Removal of Organics and Oil Spills from Waters Using Silicone Rubber “Sponges”

We have developed a simple, robust, and efficient technology utilizing cheap and recoverable materials based on commercially available silicone elastomer networks for removing organic solvents and crude oil from waters. Hydrophobic and oleophilic properties of silicone elastomers endow poly(dimethyl siloxane) (PDMS) with the capacity to absorb a large variety of organics, including benzene (B), toluene (T), ethylbenzene (E), and xylene (X), commonly referred to as BTEX, and also crude oils, while at the same time enabling the organic “sponges” to float on waters, which facilitates straightforward handling. We developed a method for generating PDMS particles with variable sizes (ranging from hundreds nanometers to few millimeters) by drop-wise depositing siloxane/cross-linker mixtures into warm water, a process which leads to the cross-linking of the PDMS components. We have tested the capability of the PDMS particles to remove toluene and benzene from water. We also performed similar experiments by utilizing PDMS sheets. In both instances we observed a rapid sorption of the organic phase into PDMS; the amount of absorbed organic solvent depended on the concentration in water and the total mass (volume) of PDMS and did not depend on the geometry of the PDMS “sponge.” In addition, we have examined the uptake of toluene and benzene from toluene/benzene (T/B) mixtures dissolved in water. Our results indicate that the amount of benzene absorbed from the T/B mixtures into PDMS increases relative to the uptake from pure benzene/water solutions. This behavior is associated with toluene acting as a “surfactant” that effectively replaces the more unfavorable PDMS/B contacts with less costly T/B ones. Finally, a simple experiment demonstrates qualitatively that PDMS is also capable of removing crude oils from oil-contaminated waters.     

Camphor and nopinone derivatives as new photosensitive chiral dopants

E-Z photoisomerizable chiral dopants are a class of materials that can be used to prepare birefringent optical components with patterned optical properties. Two new photoisomerizable chiral dopants have been synthesized and analysed. The materials were derived from nopinone and camphor. The properties of these compounds were compared with the properties of the methone derivative described in earlier publications. The E-isomers of the nopinone and camphor derivatives had helical twisting powers of 2.7 and 1.7 μm^-1, respectively. This is a factor of about 10 lower than the value obtained for the menthone derivative (-19 μm^-1). Due to the high absorption of the Z-isomers relative to the E-isomers of the nopinone and camphor derivatives, isomerization during 365 nm UV exposure proceeded to a much lesser extent than the isomerization of the menthone derivative. At shorter wavelengths, the absorption of the Z-isomer is much lower than that of the E-isomer and much higher degrees of conversion could be achieved.     

Covalent Immobilization of β-Glucosidase on Magnetic Particles for Lignocellulose Hydrolysis

β-Glucosidase hydrolyzes cellobiose to glucose and is an important enzyme in the consortium used for hydrolysis of cellulosic and lignocellulosic feedstocks. In the present work, β-glucosidase was covalently immobilized on non-porous magnetic particles to enable re-use of the enzyme. It was found that particles activated with cyanuric chloride and polyglutaraldehyde gave the highest bead-related immobilized enzyme activity when tested with p-nitrophenyl-β-D-glucopyranoside (104.7 and 82.2 U/g particles, respectively). Furthermore, the purified β-glucosidase preparation from Megazyme gave higher bead-related enzyme activities compared to Novozym 188 (79.0 and 9.8 U/g particles, respectively). A significant improvement in thermal stability was observed for immobilized enzyme compared to free enzyme; after 5 h (at 65 °C), 36 % of activity remained for the former, while there was no activity in the latter. The performance and recyclability of immobilized β-glucosidase on more complex substrate (pretreated spruce) was also studied. It was shown that adding immobilized β-glucosidase (16 U/g dry matter) to free cellulases (8 FPU/g dry matter) increased the hydrolysis yield of pretreated spruce from ca. 44 % to ca. 65 %. In addition, it was possible to re-use the immobilized β-glucosidase in the spruce and retain activity for at least four cycles. The immobilized enzyme thus shows promise for lignocellulose hydrolysis.     

Bridging Ligand Length Controls AT Selectivity and Enantioselectivity of Binuclear Ruthenium Threading Intercalators

The slow dissociation of DNA threading intercalators makes them interesting as model compounds in the search for new DNA targeting drugs, as there appears to be a correlation between slow dissociation and biological activity. Thus, it would be of great value to understand the mechanisms controlling threading intercalation, and for this purpose we have investigated how the length of the bridging ligand of binuclear ruthenium threading intercalators affects their DNA binding properties. We have synthesised a new binuclear ruthenium threading intercalator with slower dissociation kinetics from ct‐DNA than has ever been observed for any ruthenium complex with any type of DNA, a property that we attribute to the increased distance between the ruthenium centres of the new complex. By comparison with previously studied ruthenium complexes, we further conclude that elongation of the bridging ligand reduces the sensitivity of the threading interaction to DNA flexibility, resulting in a decreased AT selectivity for the new complex. We also find that the length of the bridging ligand affects the enantioselectivity with increasing preference for the ΔΔ enantiomer as the bridging ligand becomes longer.     

A conformationally constrained fused tricyclic nisin AB-ring system mimic toward an improved pyrophosphate binder of lipid II

The bacteria-specific membrane component lipid II is essential for bacterial cell wall synthesis. A tricyclic nisin mimic was designed and synthesized in which both thioether moieties were mimicked by an alkane-bridge, as well as the introduction of a third conformational constraint consisting of a macrocyclic lactam-bridge between the N-terminus and the B-ring. The newly designed tricyclic AB-ring mimic was found to bind lipid II since it was able to inhibit nisin-induced membrane leakage in a dose-dependent manner. These results imply that the tricyclic AB-ring mimic may form a novel class of lead structures for the development of nisin-based peptide antibiotics.