How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.     

Evaluation of the Long‐term Cumulative UVA Facial Exposure of Queensland School Teachers derived for an Extended Period from the OMI Satellite Irradiance

This research presents a novel methodology for deriving the total daily broadband solar UVA (320–400 nm) received by school teachers during their working day from Ozone Monitoring Instrument (OMI) satellite solar noon UVA irradiance measurements for a Queensland subtropical site (27.5°S, 152°E). Daily UVA exposures are weighted to the anatomical human cheek (anterior infra‐orbital region) for teachers wearing and not wearing broad‐brimmed hats. The method utilizes the OMI UVA irradiance data collected daily at high temporal resolution over 2005 to 2016 to derive the total daily UVA exposure to a horizontal plane. These horizontal plane exposures are scaled by factors to take into account the timing of outdoor activity. The relationship between exposures to a horizontal plane and those to a vertical plane and the protection provided by a broad‐brimmed hat was assessed to evaluate the total daily UVA exposures to the cheek for classroom and physical education teaching staff expected to be outside at different periods of the day. The developed method enables the total daily UVA exposure to specific anatomical sites to be evaluated from the satellite solar noon irradiance at locations that do not have access to surface‐based instrumentation capable of recording in the solar UVA waveband.     

The use of moisture sorption isotherms and glass transition temperature to assess the stability of powdered baby formulas

The influence of adverse conditions of environment in the case of baby formulas, which are multiple mixtures, should be minimised. Water activity (a _w) and moisture content, correlated through sorption isotherms, and glass transition temperature have been considered relevant parameters to describe food stability. The aim of the study was to analyse water activity and glass transition temperature as the function of water content for samples of baby formulas. Three types of baby formulas (mixture, agglomerate, coated agglomerate) were determined by sorption isotherms, DSC and MDSC. DSC curves of mixture, agglomerate and coated agglomerate did not show differences in shape and course. The glass transition temperature of powders stored at different water activities was measured and it decreased with the increase in moisture content, confirming the strong plasticising effect of water on this property. Critical water activities varied from 0.14 to 0.68 and critical moisture contents varied from 0.032 to 0.062 g g^?1 powder.     

Turning Tryptophanase into Odor‐Generating Biosensors

An odor‐based sensor system that exploits the metabolic enzyme tryptophanase (TPase) as the key component is reported. This enzyme is able to convert an odorless substrate like S‐methyl‐L ‐cysteine or L ‐tryptophan into the odorous products methyl mercaptan or indole. To make a biosensor, TPase was biotinylated so that it could be coupled with a molecular recognition element, such as an antibody, to develop an ELISA‐like assay. This method was used for the detection of an antibody present in nM concentrations by the human nose. TPase can also be combined with the enzyme pyridoxal kinase (PKase) for use in a coupled assay to detect adenosine 5′‐triphosphate (ATP). When ATP is present in the low μM concentration range, the coupled enzymatic system generates an odor that is easily detectable by the human nose. Biotinylated TPase can be combined with various biotin‐labeled molecular recognition elements, thereby enabling a broad range of applications for this odor‐based reporting system.     

Preparation and characterization of new mouldable cellulose-AESO biocomposites

A new concept of using acrylated epoxidized soybean oil (AESO) in the production of 3D cellulose biocomposites was evaluated. Cellulose-AESO composites were prepared by dissolving pulp in N,N-dimethylacetamide/lithium chloride and adding AESO and an initiator to the solutions followed by thermal curing and compression moulding at room temperature. The resulting biocomposites were characterized by FE-SEM, FT-IR, XRD, GC, TGA and nano- and microindentation. SEM images indicated the presence of spherical morphology and FT-IR together with TGA results showed no hydrogen or covalent bonding between the two components. The existence of hydrophobic interactions between AESO molecules and cellulose hydrophobic domains was proposed. AESO aggregates captured and covered by cellulose chains increase the flexibility of the composites acting as specific plasticizer and after polymerization introduce strength to the material. It was found that the optimal amount of AESO for achieving both desired hardness and good mouldability should be below 20 %.     

Characterization of Bioactive Compounds of Opuntia ficus-indica (L.) Mill. Seeds from Spanish Cultivars

Opuntia ficus-indica (L.) Mill. is the Cactaceae plant with the greatest economic relevance in the world. It can be used for medicinal purposes, animal nutrition, production of biofuels and phytoremediation of soils. Due to its high content of bioactive compounds, the prickly pear has antioxidant, antimicrobial and anticancer properties. The aim of this study was to determine the polyphenolic, fatty acid and amino acid profile and characterize the antioxidant capacity of seeds of seven Spanish prickly pear cultivars. A total of 21 metabolites, mainly phenolic acids and flavonols, were identified using ultraperformance liquid chromatography photodiode detector quadrupole/time-of-flight mass spectrometry (UPLC-PDA-Q/TOF-MS). Significant differences were found in the phenolic concentrations of the investigated varieties. The highest amount of phenolic compounds (266.67 mg/kg dry matter) were found in the “Nopal espinoso” variety, while the “Fresa” variety was characterized by the lowest content (34.07 mg/kg DM) of these compounds. In vitro antioxidant capacity was positively correlated with the amount of polyphenols. The amino acid composition of protein contained in prickly pear seeds was influenced by the variety. Glutamic acid was the predominant amino acid followed by arginine, aspartic acid and leucine, independent of prickly pear variety. Overall, 13 different fatty acids were identified and assessed in prickly pear seeds. The dominant fatty acid was linoleic acid, with content varying between 57.72% “Nopal ovalado” and 63.11% “Nopal espinoso”.     

ToF‐SIMS spectrometry to observe fatty acid profiles of breast tissues in broiler chicken subjected to varied vegetable oil diet

This study is aimed to observe changes in fatty acid profiles by time of flight secondary ion mass spectrometry (ToF‐SIMS) in breast muscle tissues of broilers. Four different groups were identified. The source of fat in group I was soy oil (rich in linoleic acid, ω‐6), group II received linseed oil (ω‐3), and the third group was fed a mixture of the two mentioned oils. Broilers in the control group were fed with beef tallow, used in mass commercial production. The results reveal that the use of vegetable oils in animal nutrition determines the lipid profile of fatty acids. ToF‐SIMS measurements showed that the lipid profile of muscle fibers and intramuscular fat reflect the composition of fats used as feed additives. In both structures, the ratio of ω‐6/ω‐3 fatty acids, which is most favorable for human health, was found in the groups in which a mixture of vegetable oils and a supplement of linseed oil were used.     

MIR imaging bundles of ordered silver halide polycrystalline fibres for thermal transmission and imaging

This study aims to experimentally examine the energy-saving potential by using R-134a filled separated two-phase thermosiphon loop (STPTL) for data center applications. A parametric study had been made to compare the energy consumption of two data center racks. Two fin-and-tube heat exchangers were attached to one of the racks to form two individual thermosiphon loops. The experiments were carried out subject to different operating conditions, including three ambient temperatures (20 °C, 23 °C, and 27 °C) and filling ratios ranging from 30 to 90% in association with heating loads ranging between 1.5 kW and 6 kW. Parametric influences regarding concentrated heat loading or uniform heat loading are studied. It was found that an appreciable energy-savings can be obtained at high filling ratios and a maximum of 49% energy-saving with the assistance of thermosiphon is observed. Accordingly, the rising of system pressure will result in noticeable savings. Relative to the uniform heat loading of the data rack, the thermosiphon shows even more energy-saving potential in concentrated heat loading. This phenomenon is more pronounced at a lower ambient temperature like 20 °C. On the other hand, there is no appreciable energy-saving for the thermosiphon between concentrated and uniform heating loads when the ambient temperature is high (27 °C). Furthermore, the influence of airflow rate was also investigated under various ambient temperatures with a 90% filling ratio and a heating load of 6 kW. The results revealed that the lower airflow rate in the thermosiphon yields comparatively better energy-saving than the higher flow rate. The study on the influence of using two STPTLs indicated that 15–23% energy-saving can be achieved at a 90% filling ratio and 6 kW heating load for all the studied ambient conditions if compared with testing each loop separately. Lower thermal resistance is seen at the higher filling ratios, ambient temperatures, and heating loads.

     

CE and asymmetrical flow‐field flow fractionation studies of polymer interactions with surfaces and solutes reveal conformation changes of polymers

Amphiphilic diblock copolymers consisting of a hydrophobic core containing a polymerized ionic liquid and an outer shell composed of poly(N‐isoprolylacrylamide) were investigated by capillary electrophoresis and asymmetrical flow‐field flow fractionation. The polymerized ionic liquid comprised poly(2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate) with a constant block length (n = 24), while the length of the poly(N‐isoprolylacrylamide) block varied (n = 14; 26; 59; 88). Possible adsorption of the block copolymer on the fused silica capillary, due to alterations in the polymeric conformation upon a change in the temperature (25 and 45 °C), was initially studied. For comparison, the effect of temperature on the copolymer conformation/hydrodynamic size was determined with the aid of asymmetrical flow‐field flow fractionation and light scattering. To get more information about the hydrophilic/hydrophobic properties of the synthesized block copolymers, they were used as a pseudostationary phase in electrokinetic chromatography for the separation of some model compounds, that is, benzoates and steroids. Of particular interest was to find out whether a change in the length or concentration of the poly(N‐isoprolylacrylamide) block would affect the separation of the model compounds. Overall, our results show that capillary electrophoresis and asymmetrical flow‐field flow fractionation are suitable methods for characterizing conformational changes of such diblock copolymers.     

Synthesis,experimental and in silico studies of N‐fluorenylmethoxycarbonyl‐O‐tert‐butyl‐N‐methyltyrosine,coupled with CSD data: a survey of interactions in the crystal structures of Fmoc–amino acids

Recently, fluorenylmethoxycarbonyl (Fmoc) amino acids (e.g. Fmoc–tyrosine or Fmoc–phenylalanine) have attracted growing interest in biomedical research and industry, with special emphasis directed towards the design and development of novel effective hydrogelators, biomaterials or therapeutics. With this in mind, a systematic knowledge of the structural and supramolecular features in recognition of those properties is essential. This work is the first comprehensive summary of noncovalent interactions combined with a library of supramolecular synthon patterns in all crystal structures of amino acids with the Fmoc moiety reported so far. Moreover, a new Fmoc‐protected amino acid, namely, 2‐{[(9H‐fluoren‐9‐ylmethoxy)carbonyl](methyl)amino}‐3‐{4‐[(2‐hydroxypropan‐2‐yl)oxy]phenyl}propanoic acid or N‐fluorenylmethoxycarbonyl‐O‐tert‐butyl‐N‐methyltyrosine, Fmoc‐N‐Me‐Tyr(t‐Bu)‐OH, C₂₉H₃₁NO₅, was successfully synthesized and the structure of its unsolvated form was determined by single‐crystal X‐ray diffraction. The structural, conformational and energy landscape was investigated in detail by combined experimental and in silico approaches, and further compared to N‐Fmoc‐phenylalanine [Draper et al. (2015). CrystEngComm, 42 , 8047–8057]. Geometries were optimized by the density functional theory (DFT) method either in vacuo or in solutio. The polarizable conductor calculation model was exploited for the evaluation of the hydration effect. Hirshfeld surface analysis revealed that H…H, C…H/H…C and O…H/H…O interactions constitute the major contributions to the total Hirshfeld surface area in all the investigated systems. The molecular electrostatic potentials mapped over the surfaces identified the electrostatic complementarities in the crystal packing. The prediction of weak hydrogen‐bonded patterns via Full Interaction Maps was computed. Supramolecular motifs formed via C—H…O, C—H…π, (fluorenyl)C—H…Cl(I), C—Br…π(fluorenyl) and C—I…π(fluorenyl) interactions are observed. Basic synthons, in combination with the Long‐Range Synthon Aufbau Modules, further supported by energy‐framework calculations, are discussed. Furthermore, the relevance of Fmoc‐based supramolecular hydrogen‐bonding patterns in biocomplexes are emphasized, for the first time.