Fully automated determination of parabens, triclosan and methyl triclosan in wastewater by microextraction by packed sorbents and gas chromatography-mass spectrometry

A fully automated method for the determination of triclosan (TCS), its derivative methyl triclosan (MeTCS) and six parabens (esters of 4-hydroxybenzoic acid) including branched and linear isomers of propyl (i-PrP and n-PrP) and butyl paraben (i-BuP and n-BuP) in sewage water samples is presented. The procedure includes analytes enrichment by microextraction by packed sorbent (MEPS) coupled at-line to large volume injection-gas chromatography-mass spectrometry (LVI-GC-MS). Under optimised conditions, compounds were extracted from 2 mL samples, adjusted at pH 3, using a C18 MEPS-sorbent. Adsorbed analytes were eluted directly into the Programmable Temperature Vaporizer (PTV) injector of the chromatograph with 2×25 μL of ethyl acetate. They were quantified using standard solutions in ultrapure water submitted to the same sample enrichment process as real sewage water samples. After signal normalisation using isotopic labelled species as internal surrogates, no differences were noticed among the extraction efficiency for sewage and ultrapure water; moreover, the proposed method reported lineal calibration curves from 0.1 to 10 ng mL(-1), relative standard deviations (%RSD) between 2 and 7.1% and limits of detection (LODs) varying from 0.001 to 0.015 ng mL(-1) in ultrapure water and from 0.02 to 0.59 ng mL(-1) in the most complex sample (raw wastewater).     

Design and synthesis of a new class of membrane-permeable triazaborolopyridinium fluorescent probes

A new class of fluorescent triazaborolopyridinium compounds was synthesized from hydrazones of 2-hydrazinylpyridine (HPY) and evaluated as potential dyes for live-cell imaging applications. The HPY dyes are small, their absorption/emission properties are tunable through variation of pyridyl or hydrazone substituents, and they offer favorable photophysical characteristics featuring large Stokes shifts and general insensitivity to solvent or pH. The stability, neutral charge, cell membrane permeability, and favorable relative influences on the water solubility of HPY conjugates are complementary to existing fluorescent dyes and offer advantages for the development of receptor-targeted small-molecule probes. This potential was assessed through the development of a new class of cysteine-derived HPY-conjugate imaging agents for the kinesin spindle protein (KSP) that is expressed in the cytoplasm during mitosis and is a promising chemotherapeutic target. Conjugates possessing the neutral HPY or charged Alexa Fluor dyes that function as potent, selective allosteric inhibitors of the KSP motor were compared using biochemical and cell-based phenotypic assays and live-cell imaging. These results demonstrate the effectiveness of the HPY dye moiety as a component of probes for an intracellular protein target and highlight the importance of dye structure in determining the pathway of cell entry and the overall performance of small-molecule conjugates as imaging agents.     

A modification of the successive projections algorithm for spectral variable selection in the presence of unknown interferents

This work proposes a modification to the successive projections algorithm (SPA) aimed at selecting spectral variables for multiple linear regression (MLR) in the presence of unknown interferents not included in the calibration data set. The modified algorithm favours the selection of variables in which the effect of the interferent is less pronounced. The proposed procedure can be regarded as an adaptive modelling technique, because the spectral features of the samples to be analyzed are considered in the variable selection process. The advantages of this new approach are demonstrated in two analytical problems, namely (1) ultraviolet–visible spectrometric determination of tartrazine, allure red and sunset yellow in aqueous solutions under the interference of erythrosine, and (2) near-infrared spectrometric determination of ethanol in gasoline under the interference of toluene. In these case studies, the performance of conventional MLR-SPA models is substantially degraded by the presence of the interferent. This problem is circumvented by applying the proposed Adaptive MLR-SPA approach, which results in prediction errors smaller than those obtained by three other multivariate calibration techniques, namely stepwise regression, full-spectrum partial-least-squares (PLS) and PLS with variables selected by a genetic algorithm. An inspection of the variable selection results reveals that the Adaptive approach successfully avoids spectral regions in which the interference is more intense.     

Electron excitation of the Schumann-Runge continuum, longest band, and second band electronic states in O2

We report measurements of differential and integral cross sections for electron excitation of the Schumann-Runge continuum, longest band, and second band electronic states in molecular oxygen. The energy range of the present study is 15-200 eV, with the angular range of the differential cross section (DCS) measurements from 2 to 130°. A generalized oscillator strength analysis is then employed in order to derive integral cross sections (ICSs) from the corresponding DCSs, and these ICSs are compared with relevant energy and oscillator strength scaled Born cross section (BEf-scaling [Y.-K. Kim, J. Chem. Phys. 126, 064305 (2007)]) results determined as a part of this investigation. Interestingly, while the present Schumann-Runge continuum and second band ICSs were in reasonable agreement with the respective BEf-scaling results, agreement for the longest band was poor below 100 eV with a possible reason for this apparently anomalous behavior being canvassed here. Finally, where possible all present data are compared with the results from earlier measurements and calculations with the level of agreement found being very good in some cases and marginal in others.     

(Liquid + liquid) equilibria of binary systems containing hyperbranched polymer Boltorn® H2004 – Experimental study and modelling in terms of lattice-cluster theory

(Liquid + liquid) phase equilibria (LLE) of binary mixtures containing hyperbranched polymer Boltorn® H2004 and n-alkanes (n-hexane, n-heptane, n-octane, and n-decane) were studied over the temperature range from about (260 up to 360) K. The polymer is partially miscible with n-alkanes and the solubility decreases with an increase of the chain length of the solvent. Corresponding LLE phase diagrams including spinodal and binodal (liquid + liquid) coexistence curves were calculated in terms of the statistical mechanics – based on the lattice-cluster theory, based only on the upper critical solution temperature, and the polymer chain architecture. The results show semi-qualitative agreement of predicted and experimental equilibrium compositions and temperatures. Boltorn® H2004 reveals complete miscibility in the liquid phase with alcohols (C₁–C₈), aromatic hydrocarbons (benzene, toluene, and thiophene), and ethers (methyl tetra-butyl ether, ethyl tetra-butyl ether, and tetrahydrofurane).     

On the way to understand antioxidants: chromanol and dimethoxyphenols gas-phase acidities

Some antioxidant mechanisms displayed by several phenolic compounds relate with OH bond dissociation energy. One way for its determination, in the gas-phase, relies on acidity measurements. Gas-phase acidities were determined experimentally, applying the kinetic method, for chromanol and four dimethoxyphenols, and theoretically through quantum chemical DFT calculations for chromanol, six dimethoxyphenols and 3,4,5-trimethoxyphenol. The experimental acidity order, 2,3-dimethoxyphenol > 3,5-dimethoxyphenol > 2,6-dimethoxyphenol > 3,4-dimethoxyphenol ≈ phenol > chromanol shows good agreement with the theoretical acidity order, 2,5-dimethoxyphenol > 2,3-dimethoxyphenol > 3,4,5-trimethoxyphenol > 3,5-dimethoxyphenol ≈ 2,4-dimethoxyphenol > 2,6-dimethoxyphenol > 3,4-dimethoxyphenol > phenol > chromanol. These acidity trends were rationalized in terms of the substituent effects on the thermodynamic stabilities both of the parent phenols and the corresponding phenoxide ions. DFT calculations also evidenced the occurrence of intramolecular C-H···O hydrogen bonds whenever there are vicinal substituents (either OH, O(-) or OCH(3)) which induce further stabilization of the geometries.     

QTAIM charge-charge flux-dipole flux interpretation of electronegativity and potential models of the fluorochloromethane mean dipole moment derivatives

Infrared fundamental vibrational intensities and quantum theory atoms in molecules (QTAIM) charge-charge flux-dipole flux (CCFDF) contributions to the polar tensors of the fluorochloromethanes have been calculated at the QCISD/cc-pVTZ level. A root-mean-square error of 20.0 km mol(-1) has been found compared to an experimental error estimate of 14.4 and 21.1 km mol(-1) for MP2/6-311++G(3d,3p) results. The errors in the QCISD polar tensor elements and mean dipole moment derivatives are 0.059 e when compared with the experimental values. Both theoretical levels provide results showing that the dynamical charge and dipole fluxes provide significant contributions to the mean dipole moment derivatives and tend to be of opposite signs canceling one another. Although the experimental mean dipole moment derivative values suggest that all the fluorochloromethane molecules have electronic structures consistent with a simple electronegativity model with transferable atomic charges for their terminal atoms, the QTAIM/CCFDF models confirm this only for the fluoromethanes. Whereas the fluorine atom does not suffer a saturation effect in its capacity to drain electronic charge from carbon atoms that are attached to other fluorine and chlorine atoms, the zero flux electronic charge of the chlorine atom depends on the number and kind of the other substituent atoms. Both the QTAIM carbon charges (r = 0.990) and mean dipole moment derivatives (r = 0.996) are found to obey Siegbahn's potential model for carbon 1s electron ionization energies at the QCISD/cc-pVTZ level. The latter is a consequence of the carbon mean derivatives obeying the electronegativity model and not necessarily to their similarities with atomic charges. Atomic dipole contributions to the neighboring atom electrostatic potentials of the fluorochloromethanes are found to be of comparable size to the atomic charge contributions and increase the accuracy of Siegbahn's model for the QTAIM charge model results. Substitution effects of the hydrogen, fluorine, and chlorine atoms on the charge and dipole flux QTAIM contributions are found to be additive for the mean dipole derivatives of the fluorochloromethanes.     

Photophysical study of bis(naphthalimide)-amine conjugates: toward molecular design of excimer emission switching

The fluorescence properties of two bis(1,8-naphthalimides) with amino-containing spacers are investigated, giving special emphasis to the observation of excimer emission. It is found that a minor elongation of the spacer by two methylene units gives rise to a quantitative shut-down of the broad and red-shifted excimer emission. Furthermore, a switching of this emission is established through manipulation of a photoinduced electron transfer process, which involves the amino spacer. Protons as well as protic solvents lead to substantial excimer emission with lifetimes of 12 to 27 ns. The excimer quantum yield takes a maximum value of Φ(f) = 0.07 (acetonitrile with 1 equiv trifluoroacetic acid). The increased virtual Stokes shifts (ca. 150 nm) as compared to the fluorescence of monomeric 1,8-naphthalimides are an alternative approach to obtain colored, significant, and long-lived fluorescence from these chromophores. As an additional excited state pathway, the occurrence of homo-Fo?rster resonance energy transfer (homo-FRET) is established by fluorescence polarization measurements and calculation of the corresponding critical Fo?rster radius (R(0) ca. 13 ?). The average interchromophore distance between the naphthalimides is estimated as 7.5 ? and 9.5 ? for the dyad with the shorter and the longer spacer, respectively. These observations and the absence of a rise time component for excimer emission are in agreement with the formation of a "loose" ground state dimer, which upon excitation undergoes a fast geometrical adjustment to the excimer structure where the chromophores are at contact distance.     

Comparative properties of Amazonian oils obtained by different extraction methods

Pequi (Caryocar brasiliense Camb.), baba?u (Orbignya phalerata Mart.), buriti (Mauritia flexuosa), and passion fruit (Passiflora edulis) oils were studied to determine their antibacterial, antioxidant and cytotoxic activities, as well as their total phenol and carotenoid contents. The fatty acid contents were determined by GC-MS. The three types of passion fruit oils studied were refined, cold pressed or extracted from seeds in a Soxhlet apparatus. The oils thus obtained showed differences in antioxidant activity and carotenoid content, but were similar in regard to total phenols. Buriti and pequi had the highest carotenoid contents, while refined and cold pressed passion fruit oil displayed the highest antioxidant activity. Pequi oil was the only oil to display antibacterial and cytotoxic activity.