Flow-injection spectrophotometric determination of sulfadiazine and sulfamethoxazole in pharmaceuticals and urine.

A rapid and sensitive flow-injection spectrophotometric method is proposed for the determination of sulfadiazine and sulfamethoxazole. This method is based on the diazotization of sulfonamide with sodium nitrite, and a coupling reaction of the diazo-compound with alpha-naphthylamine. The optimum experimental conditions are obtained by using the controlled and weighted centroid simplex method. The linear ranges for the determination of sulfadiazine and sulfamethoxazole are 0.2-20 microg ml(-1) and 0.1-20 microg ml(-1), and their detection limits are 0.06 microg ml(-1) and 0.05 microg ml(-1), respectively, and the sampling frequency is 130 samples per hour. The method has been used to determine sulfadiazine and sulfamethoxazole in pharmaceuticals and urine without separation. The results are in agreement with those obtained by a high-performance liquid chromatograph technique at the 95% confidence level.     

条形码技术的国际发展趋势及我国的对策

介绍了供应链管理中的一个得力工具——条形码技术，对这一技术进行了剖析，分析了条形码技术的国际发展趋势以及在我国的应用现状，最后针对我国在实现条形码技术时所遇到的各种问题提出了一些建议。     

The spectrum of cyclic BSA(ν, 3, λ; α) with α = 2, 3

Balanced sampling plans excluding contiguous units (or BSEC) were first introduced by Hedayat, Rao, and Stufken in 1988. In this paper, we generalize the concept of a cyclic BSEC to a cyclic balanced sampling plan to avoid the selection of adjacent units (or CBSA for short) and use Langford and extended Langford sequences to construct a cyclic BSA(ν, 3, λ; α) with α = 2, 3. We finally establish the necessary and sufficient conditions for the existence of a cyclic BSA(ν, 3, λ; α) where α = 2, 3. © 2005 Wiley Periodicals, Inc. J Combin Designs.     

燃煤过程痕量元素动力学机理的研究进展

由于痕量元素在煤中的含量低微、检测困难,加之其原子量一般较大,可能的反应途径多,使得相关的反应机理研究难度极大。本文结合作者的研究成果,介绍了煤燃烧过程中痕量元素化学反应动力学的国内外研究进展,包括痕量元素化学动力学机理的建立;相关的典型实验、计算模拟及其实验验证、动力学机理模型的简化;痕量元素反应动力学机理的完善和发展,包括采用简单碰撞理论、活化络合物理论(亦称过渡态理论,或绝对反应速率理论)对痕量元素化学反应动力学机理的修正;最后指出煤燃烧过程中痕量元素动力学研究的若干方向是: (1)痕量元素反应动力学模型数据库的建立;(2)煤燃烧过程中,主量元素和次量元素的动力学机理的完善; (3)各痕量元素之间动力学研究的开展; (4)实际燃烧过程中痕量元素动力学行为的研究。     

Synthesis,X-Ray Structure and Characterization of a Triruthenium Cluster Complex Ru_3~Ⅲ(μ_3-O)(μ-CH_3COO)_6(py)_2Cl with Four Steps One-electron Redox Processes

Great attention is currently paid to the synthesis of polynuclear transition metal complexes as well as their photochemical, photophysical, and electrochemical properties. The design of multicomponent systems capable of performing useful light- and/or redox-induced function is of special interest1. The oxo-centered carboxylate-bridge trinuclear ruthenium clusters have been investigated extensively during recent decades because they have remarkable electron-transfer properties, intense visibl…     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

自控式电磁线圈炮

以交流电驱动电磁场为动力，结合直流电机与磁力天平理论的新成果，设计了线圈型电磁炮.     

第二类变型Bessel函数的Chebyshev逼近

第二类变型Bessel函数Kn(z)在自变量趋于无穷时就是指数变小的，使用多项式逼近的方法求解往往误差很大．采用指数变换和J．P．Boyd的有理Chebyshev多项式计算第二类变型Bessel函数，得到了令人满意的在较大范围内有效的解．     

电感耦合等离子体发射光谱法同时测定涂料中的Pb、Cd、Cr和Hg

研究了电感耦合等离子体发射光谱法测定涂料中的重金属Pb，Cd，Cr和Hg，确定了测定涂料中的重金属Pb，Cd，Cr和Hg的最佳条件。加标回收试验和实际样品测定结果表明，方法的回收率和精密度分别在99.5％-110．0％和0．95％-1．98％范围，该方法快速、准确、可靠，各元素的检出限能满足涂料安全标准，适用于涂料的日常检验。