Detection of low caloric power of coal by pulse fast-thermal neutron analysis

This paper introduces the analysis method and principle of pulse fast-thermal neutron analysis (PFTNA). A system for the measurement of low caloric power of coal by PFTNA is also presented. The 14 MeV pulse neutron generator and BGO detector and 4096 MCA were applied in this system. A multiple linear regression method applied to the data solved the interferential problem of multiple elements. The error of low caloric power between chemical analysis and experiment was less than 0.4 MJ/kg. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Characterisitic of Proton-Exchanged LiNbO3 Waveguide Formed by Different Proton Source

Benzoic acid as a source of proton is widely used in the technology of manufacture of proton exchanged ( PE) waveguide .But the diffusing speed of proton is too fast to make the waveguide stable in the pure benzoic acid. The characteristic of waveguide is improved with mixture of benzoic acid and lithium benzoate .     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

刘维尔与伽罗瓦数学手稿的发表

1846年,刘维尔在自己主办的杂志“纯粹与应用数学杂志”首次出版了伽罗瓦的数学研究,这对于伽罗瓦理论的传播与发展是具有决定意义的事件.伽罗瓦去世14年后,刘维尔发表伽罗瓦数学研究的原因是什么?采用数学历史文献分析法,得出四个重要原因:①伽罗瓦的朋友和弟弟的请求;②力图弥补科学院曾经造成的不公正;③刘维尔积极扶持年轻人的高贵品质使然;④刘维尔与利布里学术论战的促进.     

The spectrum of BSA(v, 3, λ; α) with α = 2,3

In this article, a kind of auxiliary design BSA^* for constructing BSAs is introduced and studied. Two powerful recursive constructions on BSAs from 3‐IGDDs and BSA^*s are exploited. Finally, the necessary and sufficient conditions for the existence of a BSA(v, 3, λ; α) with α = 2, 3 are established. © 2006 Wiley Periodicals, Inc. J Combin Designs 15: 61–76, 2007     

基于演化博弈的武器装备研制合同定价模型研究

针对合同的动态性，提出利用基于演化博弈建立定价模型。考虑到决策群体中个体的认识误差，对所建立的定价模型进行修正，建立带偏离的定价模型并分析了偏离对均衡解的影响。最后将以上模型应用实例进行比较分析。     

Theoretical analysis of thermal effects in fiber laser from the moment when pump is turned on to steady-state

A theoretical analysis of the pump-induced temperature change and associated thermal phase shift occurring in a fiber laser is presented. The temperature rise and thermal phase shift from the moment when pump is turned on to steady-state in fiber lasers, such as Yb-doped fiber laser, are numerical calculated.With the same parameters, the numerical solution is in good agreement with the finite-element (ANSYS software) simulation.     

枸橼酸铋制剂中铋元素的溶出量分析

微波消解溶样，ICP—AES法测定了枸橼酸铋制剂中铋元素的含量及其在人工胃液和人工肠液中的溶出量。结果表明，枸橼酸铋制剂中的铋元素在人工肠液中的溶出量明显高于人工胃液。方法的检出限为12ng／mL，相对标准偏差(n=7)为3．84％。     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

字节全加器及其在无线电测控系统中的应用

对全加器概念进行了推广，并在此基础上给出了使用字节全加器网络的无线电抗干扰算法。通过在实际的无线电测控系统中的应用，结果表明该算法具有良好的无线电抗干扰效果。