双维位置灵敏CsI(Tl)探测器

描述了一种双维位置灵敏CsI(Tl)探测器.用3组分α源测量该探测器得到的位置分辨为0.81mm(FWHM),对于69MeV/u ³⁶Ar能量分辨为0.9％(FWHM).在RIBLL的ΔE-E粒子鉴别望远镜中常常作为E探测器.由于CsI(Tl)晶体对不同的粒子的能损-光输出的非线性,需要针对不同离子对CsI探测器作能量-光输出校正曲线.     

Bounds to optimal burn‐in and optimal work size

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining the optimal burn‐in time and optimal work size maximizing the long‐run average amount of work saved per time unit in the computer applications. Assuming that the underlying lifetime distribution of the computer has an initially decreasing or/and eventually increasing failure rate function, an upper bound for the optimal burn‐in time is derived for each fixed work size and a uniform (with respect to the burn‐in time) upper bound for the optimal work size is also obtained. Furthermore, it is shown that a non‐trivial lower bound for the optimal burn‐in time can be derived if the underlying lifetime distribution has a large initial failure rate. Copyright © 2005 John Wiley & Sons, Ltd.     

负载型CO3[Fe（CN）6]2及CN^—加氢反应的研究

双金属催化剂是一类重要的多相催化剂。其中d电子在催化活性方面起着重要的作用.本文在Co_3[Fe(CN)_6]_2的工作基础上,进一步研究了该配合物在硅胶、氧化铝、以及氧化镁上的热性质,同时考察了CN~-在Co-Fe体系双端基配位的活化加氢,探讨了载体的影响.     

Vibrations of a magnet levitated over a flat superconductor

Based on a dipole-dipole interaction model, we discuss the levitation force and related vibration problems to understand the effects of flux pinning in type-II superconductors, and the applications of levitation in superconducting systems.     

Low Cost, High Efficiency, Gain Flattened L Band EDFA Using FBGs as C Band Seed Generators

A low cost, coolerless 980nm diode pumped, gain flattened L band EDFA with fast transient control, high pump efficiency and gain clamping effect was realized by using FBGs as C band seed generators.     

Initial oxidation kinetics of copper (1 1 0) film investigated by in situ UHV-TEM

Previous studies of the initial stage of oxidation on clean single crystal of Cu(1 0 0) have been extended to the case of the Cu(1 1 0) surface. The dynamic observation of the nucleation and growth of Cu oxide by means of in situ ultra high vacuum transmission electron microscopy (UHV-TEM) shows a highly enhanced oxidation rate on Cu(1 1 0) surface as compared to Cu(1 0 0). The kinetic data on the nucleation and growth of the three-dimensional oxide islands agree well with our heteroepitaxial model of surface diffusion of oxygen.     

129Xe30+轰击Ni表面激发靶原子偶极跃迁和禁戒 (M1和E2)跃迁的特征光谱线

报道了用高电荷态离子129Xe30+(150keV) 轰击金属Ni表面，激发的200—1000nm NiⅠ和NiⅡ的特征光谱线的实验结果.实验结果表明：用电荷态足够高的离子作光谱 激发源，无需很强的束流强度（nA量级），便可有效地产生原子和离子的复杂组态间跃迁所 形成的可见光波段的特征谱线，特别是NiⅠ和NiⅡ偶极禁戒的电四极跃迁E2和磁偶极跃迁M1 的特征光谱线.通过分析发现，在禁戒跃迁的谱线中，有些是电子组态相同而原子态不同的 偶极禁戒跃迁光谱线而且NiⅡ的684.84nm谱线较强. 关键词： 光谱 禁戒跃迁 电子组态 高电荷态离子     

Polarization Self-Modulation Phenomenon in a Free Oscillated Nd：YAG Laser

Polarization self-modulation effect in a free oscillated Nd：YAG laser is investigated after a quarter wave plate is introduced independently in the two positions of the cavity. As described in the previous experiments, the intensity components in the orthogonal directions are modulated with a period of the round-trip time or twice. Different pulse shapes reveal that the seed field from the spontaneous emission is not uniform and seems to be stochastic for each pulse.     

Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)