Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Particle dynamics and particle heat and mass transfer in thermal plasmas. Part III. Thermal plasma jet reactors and multiparticle injection

Thermal plasma processing involves complex interactions of particulates with plasmas. In previous studies (see Parts I and II of this series), an assessment of different effects has been made considering the dynamics and heat and mass transfer of a single particle immersed into a thermal plasma. The last paper of this sequence is concerned with the simulation of thermal plasma jet reactors and the effects caused by multiparticle injection.A mathematical model is proposed for the simulation of thermal plasma jet reactors, including the mixing phenomena between the jet and the surrounding gases by generalizing the governing equations for simple mixing flows. Also included is the density fluctuation effect by extending the K- model to a four-equation turbulence model combined with a probability density function. This model is internally consistent covering additional physical phenomena which are not covered by existing models. Unfortunately, its expected higher accuracy cannot be proven because of the present uncertainties associated with the input.For multiparticle injection, the simulation repeats calculations for single-particle injection, but with different initial conditions correcting the solutions by considering the coupling effects between particles and the plasma.The results indicate that (i) thermal plasmas show different mixing behavior in different gases; (ii) the density fluctuation effect is important since it causes large differences between the mass-weighted and unweighted time-averaged temperatures of thermal plasma jets; (iii) coupling effects become important when the particle loading rate exceeds half of the plasma mass flow rate; (iv) there are 16 constraints imposed on the modeling work which have to be considered for establishing a base for comparison with future experimental studies.     

利用纳米粒子组装的方法制备SERS活性基底

1974年，FIeishm。nn等人［‘］发现吸附在电化学粗糙化的银电极表面上的毗院分子，其Raman散射强度具有超乎寻常的增强现象．后来经过VanDuyne门和CreZghton问等人的研究，认识到这一现象属于～种特殊的表面效应，其增强因子高达卫矿，故被称为表面增强喇曼散射（Surfac－EI。     

A facile approach to architecturally defined nanoparticles via intramolecular chain collapse

A novel approach is presented for the controlled intramolecular collapse of linear polymer chains to give well-defined single-molecule nanoparticles whose structure is directly related to the original linear polymer. By employing a combination of living free radical polymerization and benzocyclobutene (BCB) chemistry, nanoparticles can be routinely prepared in multigram quantities with the size being accurately controlled by either the initial degree of polymerization of the linear chain or the level of incorporation of the BCB coupling groups. The latter also allows the cross-link density of the final nanoparticles to be manipulated. In analogy with dendritic macromolecules, a significant reduction of up to 75% in the hydrodynamic volume is observed on going from the starting random coil linear chains to the corresponding nanoparticles. The facile nature of the living free radical process also permits wide variation in monomer selection and functional group incorporation and allows novel macromolecular architectures to be prepared. Furthermore, the use of block copolymers functionalized with benzocyclobutene groups in only one of the blocks gives, after intramolecular collapse, a hybrid architecture in which a single linear polymer chain is attached to the globular nanoparticle.     

Reductive activation of nitrate reductases

Protein film voltammetry of Paracoccus pantotrophus respiratory nitrate reductase (NarGH) and Synechococcus elongatus assimilatory nitrate reductase (NarB) shows that reductive activation of these enzymes may be required before steady state catalysis is observed. For NarGH complementary spectroscopic studies suggest a structural context for the activation. Catalytic protein film voltammetry at a range of temperatures has allowed quantitation of the activation energies for nitrate reduction. For NarGH with an operating potential of ca. 0.05 V the activation energy of ca. 35 kJ mol-1 is over twice that measured for NarB whose operating potential is ca. -0.35 V.     

Preparation and characterization of nylon 66/montmorillonite nanocomposites with co-treated montmorillonites

In this paper, a new type of organophilic montmorillonites, co-treated by octadecylammonium and aminoundecanoic acid, were synthesized and applied to prepare nylon 66/montmorillonite nanocomposites via melt compounding in a twin extruder. WAXD and TEM characterization indicate that a disordered structure was derived and the montmorillonite platelets dispersed in nanoscale in the nylon 66 matrix. The nanocomposites with co-treated montmorillonite display comparatively higher strength and modulus compared to nylon 66 matrix.     

Detection of ClSO with time-resolved Fourier-transform infrared absorption spectroscopy

ClSO was produced as an intermediate upon irradiating a flowing mixture of Cl2SO and Ar with a KrF excimer laser at 248 nm. A step-scan Fourier-transform infrared spectrometer coupled with a small multipass absorption cell was employed to detect time-resolved absorption spectrum of ClSO. A transient spectrum in the region 1120-1200 cm(-1), which diminished on prolonged reaction, is assigned to the S-O stretching (nu1) mode of ClSO. A spectrum with a resolution of 0.3 cm(-1) partially reveals rotational structure with the Q-branch at 1162.9 cm(-1). Calculations with density-functional theory (B3LYP/aug-cc-pVTZ) predict the geometry, vibrational, and rotational parameters of ClSO. An IR absorption spectrum of ClSO simulated based on predicted rotational parameters agrees satisfactorily with experimental results. ClSO produced from photolysis of Cl2SO at 248 nm is internally hot.     

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.     

SAPO分子筛的二甲苯异构化反应性能研究——酸性和孔结构对其催化性能的影响

采用水热法合成了SAPO-5、SAPO1-1、SAPO-41分子筛，并以间二甲苯异构化反应为模型反应，考察了SAPO-5、SAPO-11、SAPO-41的催化性能；运用XRD、BET、吸附吡啶的FT IR等手段表征了SAPO的结构和酸性。结果表明，在合成投料比相同的情况下，SAPO-11具有最大的较强B酸量，表现出了最好的间二甲苯异构催化活性。SAPO-5因为较强B酸中心数目少，异构催化活性最差。三种分子筛的间二甲苯异构化催化活性和较强B酸中心的分布均呈SAPO-5＜SAPO-41≈SAPO-11顺序排列。较强B酸中心的分布是决定催化剂异构化活性的主要因素。中孔分子筛SAPO-11、SAPO-41孔道直径与对位产物的直径接近，对位选择性比大孔分子筛SAPO-5好。     

Total synthesis of kendomycin: a macro-C-glycosidation approach

Kendomycin, also known as (-)-TAN 2162, is a novel polyketide-derived ansamycin isolated from Streptomyces sp., which exhibits potent antagonist and agonist activities at the endothelin and calcitonin receptors, respectively. This bacterial metabolite also possesses a strong antibiotic activity against a range of gram-positive and -negative bacteria and cytostatic effects on the growth of human cancer cell lines. When a novel macroglycosidation reaction is employed as the key step, the first enantioselective total synthesis of kendomycin has been accomplished. A Friedel-Crafts-type ring closure of the acyclic precursor containing tetrahydropyran and benzofuran moieties produces the macrocycle as a single stereoisomer in good yield, thus establishing the aryl C-glycosidic linkage of the ansa core. This reaction requires a phenolic glycosyl acceptor and appears to proceed through a rapid O-glycosidation followed by a slow rearrangement to an aryl C-glycoside. The requisite secomacrocycle is prepared by the Pd(0)-catalyzed B-alkyl Suzuki-Miyaura cross-coupling of two subunits, which in turn can be expeditiously assembled from readily available building blocks in a modular fashion.