Research on thermal decomposition of trinitrophloroglucinol salts by DSC, TG and DVST

The thermal decomposition of the four nitrogen-rich salts of ammonia (NH₄), aminoguanidine (AG), carbohydrazide (CHZ) and 5-aminotetrazo (ATZ) based on trinitrophloroglucinol (H₃TNPG) was investigated using the differential scanning calorimetry (DSC), thermogravity (TG), and dynamic vacuum stability test (DVST). DSC and TG methods research the complete decomposition, while DVST method researches the very early reaction stage. The peak temperatures of DSC curves are consistent with the temperatures of maximum mass loss rates of TG curves. The apparent activation energies of these H₃TNPG-based salts obtained by DSC and DVST have the same regularity, i.e., (ATZ)(H₂TNPG)·2H₂O < (CHZ)(HTNPG)·0.5H₂O < NH₄(H₂TNPG) < (AG)(H₂TNPG). The thermal stability order is (ATZ)(H₂TNPG)·2H₂O < (CHZ)(HTNPG)·0.5H₂O < (AG)(H₂TNPG) < NH₄(H₂TNPG), which was evaluated by DVST according to the evolved gas amount of thermal decomposition. DVST can monitor the real-time temperature and pressure changes caused by thermal decomposition, dehydration, phase transition and secondary reaction, and also evaluate the thermal stability and kinetics.      

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil,a cyclouridine nucleoside with a C4′‐endo furanosyl conformation

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil, C₁₃H₁₄N₂O₇, was obtained by refluxing 2′,3′‐O‐(methoxymethylene)uridine in acetic anhydride. The structure exhibits a nearly perfect C4′‐endo (⁴E) conformation. The best four‐atom plane of the five‐membered furanose ring is O—C—C—C, involving the C atoms of the fused five‐membered oxazolidine ring, and the torsion angle is only −0.4 (2)°. The oxazolidine ring is essentially coplanar with the six‐membered uracil ring [r.m.s. deviation = 0.012 (5) Å and dihedral angle = −3.2 (3)°]. The conformation at the exocyclic C—C bond is gauche–trans which is stabilized by various C—H...π and C—O...π interactions.     

A one‐dimensional silver(I) coordination polymer based on the 2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol ligand exhibiting photoluminescence

A one‐dimensional Ag^I coordination complex, catena‐poly[[silver(I)‐μ‐{2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol‐κ²N²:N³}] perchlorate monohydrate], {[Ag(C₁₉H₁₅N₃O)]ClO₄·H₂O}_n, was synthesized by the reaction of 2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol (L) with silver perchlorate. In the complex, the L ligands are arranged alternately and link Ag^I cations through one benzimidazole N atom and the N atom of the pyridine ring, leading to an extended zigzag chain structure. In addition, the one‐dimensional chains are extended into a three‐dimensional supramolecular architecture via O—H...O hydrogen‐bond interactions and π–π stacking interactions. The complex exhibits photoluminescence in acetonitrile solution, with an emission maximum at 390 nm, and investigation of the thermal stability reveals that the network structure is stable up to 650 K.     

Copper nanoclusters as peroxidase mimetics and their applications to H2O2 and glucose detection

Copper nanoclusters (Cu NCs) are found to possess intrinsic peroxidase-like activity for the first time. Similar to nature peroxidase, they can catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine by H₂O₂ to produce a nice blue color reaction. Compared with horseradish peroxidase, Cu NCs exhibits higher activity near neutral pH, which is beneficial for biological applications. The increase in absorbance caused by the Cu NCs catalytic reaction allows the detection of H₂O₂ in the range of 10 μM to 1 mM with a detection limit of 10 μM. A colorimetric method for glucose detection was also developed by combining the Cu NCs catalytic reaction and the enzymatic oxidation of glucose with glucose oxidase. Taking into account the advantages of ultra-small size, good stability, and high biocompatibility in aqueous solutions, Cu NCs are expected to have potential applications in biotechnology and clinical diagnosis as enzymatic mimics.     

Coffee-ring effects in laser desorption/ionization mass spectrometry

This report focuses on the heterogeneous distribution of small molecules (e.g. metabolites) within dry deposits of suspensions and solutions of inorganic and organic compounds with implications for chemical analysis of small molecules by laser desorption/ionization (LDI) mass spectrometry (MS). Taking advantage of the imaging capabilities of a modern mass spectrometer, we have investigated the occurrence of “coffee rings” in matrix-assisted laser desorption/ionization (MALDI) and surface-assisted laser desorption/ionization (SALDI) sample spots. It is seen that the “coffee-ring effect” in MALDI/SALDI samples can be both beneficial and disadvantageous. For example, formation of the coffee rings gives rise to heterogeneous distribution of analytes and matrices, thus compromising analytical performance and reproducibility of the mass spectrometric analysis. On the other hand, the coffee-ring effect can also be advantageous because it enables partial separation of analytes from some of the interfering molecules present in the sample. We report a “hidden coffee-ring effect” where under certain conditions the sample/matrix deposit appears relatively homogeneous when inspected by optical microscopy. Even in such cases, hidden coffee rings can still be found by implementing the MALDI-MS imaging technique. We have also found that to some extent, the coffee-ring effect can be suppressed during SALDI sample preparation.     

Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Resonant-Mie-scattering of aggregates of phosphomolybdate and papaverine for measuring activities and screening inhibitors of cyclic nucleotide phosphodiesterase isozymes

A resonant-light-scattering (RLS) method was proposed to quantify phosphate for screening inhibitors of isozymes of cyclic nucleotide phosphodiesterase (PDE). In acidified mixtures of phosphate, papaverine and molybdate, there were aggregates exhibiting micrometre sizes, no absorbance peaks over 360 nm but strong RLS peaks at 392 nm; Mie scattering thus accounted for the RLS signals. When papaverine was added before molybdate to acidified samples of phosphate, RLS signals at 392 nm were stable from 5 to 25 min since the addition of molybdate; after optimization, phosphate from 0.40 to 3.60 μM was quantifiable. This RLS method tolerated 60 mg L⁻¹ proteins besides common PDE inhibitors and dimethyl sulfoxide in acidified samples of phosphate; the integration of this RLS method with the coupled action of a phosphomonoesterase on PDE product was thus rational to measure PDE activities without the removal of proteins in samples. By quantifying activities of a truncated mutant of human PDE4B2 via this RLS method, Michaelis–Menten constant, inhibition constants of rolipram, papaverine and theophylline varied over three magnitudes and were consistent with those estimated by an improved malachite green assay of phosphate, respectively. Hence, this novel RLS method was promising for screening inhibitors of PDE isozymes.     

Responsive polymers for analytical applications: A review

Stimuli-responsive polymers are capable of translating changes in their local environment to changes in their chemical and/or physical properties. This ability allows stimuli-responsive polymers to be used for a wide range of applications. In this review, we highlight the analytical applications of stimuli-responsive polymers that have been published over the past few years with a focus on their applications in sensing/biosensing and separations. From this review, we hope to make clear that while the history of using stimuli-responsive polymers for analytical applications is rich, there are still a number of directions to explore and exciting advancements to be made in this flourishing field of research.