Influence of carrier gas pressure and flow rate on atomic layer deposition of HfO2 and ZrO2 thin films

Influence of the carrier gas on HfCl₄-H₂O and ZrCl₄-H₂O atomic layer processes was investigated. The growth rates of HfO₂ and ZrO₂ decreased with increasing flow rate and pressure of the N₂ carrier gas. Data of real-time quartz crystal microbalance measurements demonstrated that the effect observed was mainly due to influence of carrier gas on surface reactions and the role of overlapping the precursor pulses was negligible. At the same increase of the carrier gas mass flow, the increase of the linear flow rate led to more significant changes of thin-film properties than the increase of the carrier gas pressure did. Thin films with higher density, higher refractive index and, particularly, lower concentration of residual chlorine were obtained at higher carrier gas flow rates. Increase of the carrier gas flow rate also resulted in a higher concentration of a metastable phase in HfO₂ thin films deposited at 300 °C.     

Application of scaling concepts to sedimentation phenomena in semidilute macromolecular solutions

Sedimentation velocity data on polystyrene in a good solvent (toluene) and in a theta solvent (cyclopentane), over a large concentration range are reported. Under good-solvent conditions the exponent β in the apparent scaling law describing the concentration dependence of the sedimentation coefficient (s ∝ c^β) in the semidiiute region is found to be concentration dependent. However, a power law fit to data for the highest molecular weight (M = 20.6 × 10⁶) in the concentration region (c < 2 kg m^?3) yields a value β = ?0.59, somewhat smaller than that (?0.54) predicted theoretically. This discrepancy and the observed curvature in logs vs. logc at higher concentrations are discussed. Under theta-solvent conditions, on the other hand, the concentration dependence of s in the semidilute regime can be represented by a simple power law, with β = ?1.0, in excellent agreement with the theoretical prediction. The crossover concentration c^*, separating the dilute and semidilute concentration regimes, was found to be well defined and located at c = 1/[η]. c^* varies with molecular weight as M^?0.73 and M^?0.50 under good-solvent and theta-solvent conditions, respectively.     

Cell‐Laden Hydrogels for Multikingdom 3D Printing

Living materials are created through the embedding of live, whole cells into a matrix that can house and sustain the viability of the encapsulated cells. Through the immobilization of these cells, their bioactivity can be harnessed for applications such as bioreactors for the production of high‐value chemicals. While the interest in living materials is growing, many existing materials lack robust structure and are difficult to pattern. Furthermore, many living materials employ only one type of microorganism, or microbial consortia with little control over the arrangement of the various cell types. In this work, a Pluronic F127‐based hydrogel system is characterized for the encapsulation of algae, yeast, and bacteria to create living materials. This hydrogel system is also demonstrated to be an excellent material for additive manufacturing in the form of direct write 3D‐printing to spatially arrange the cells within a single printed construct. These living materials allow for the development of incredibly complex, immobilized consortia, and the results detailed herein further enhance the understanding of how cells behave within living material matrices. The utilization of these materials allows for interesting applications of multikingdom microbial cultures in immobilized bioreactor or biosensing technologies.     

Ultraviolet cavity ringdown spectra and the S1(n,pi) ring-inversion potential energy function for 2-cyclohexen-1-one-d0 and Its 2,6,6-d3 isotopomer

The cavity ringdown spectra of 2-cyclohexen-1-one (2CHO) and its 2,6,6-d3 isotopomer (2CHO-d3) have been recorded in the spectral region near their S1(n,pi)<--S0 band origins which are at 26,081.3 and 26,075.3 cm-1, respectively. The data allow several of the quantum states of nu39, the ring inversion, to be determined for both the ground and excited electronic states. These were utilized to calculate the one-dimensional potential energy functions which best fit the data. The barriers to inversion for the S0 and S1(n,pi) states were found to be 1,900 +/- 300 and 3,550 +/- 500 cm-1, respectively. Density functional theory calculations predict values of 2,090 and 2,265 cm-1, respectively.     

Vibrational spectra, DFT calculations, unusual structure, anomalous CH2 wagging and twisting modes, and phase-dependent conformation of 1,3-disilacyclobutane

Our previously published infrared and Raman spectra of 1,3-disilacyclobutane (13DSCB) and its 1,1,3,3-d4 isotopomer have been reexamined and partially reassigned on the basis of DFT and ab initio calculations. The calculations confirm previous microwave work that the CSiC angles in the ring are unexpectedly larger than the SiCSi angles. This may arise from the partial charges on the ring atoms. The calculations are in excellent agreement with the observed spectra in both frequency and intensity. They also demonstrate that this molecule has CH2 wagging and twisting vibrations with frequencies below 1000 cm-1, about 200 cm-1 lower than expected. These unprecedented low values can be explained by the decreased slope in the potential energy curves for these vibrations as the sideways motions of the CH2 groups result in attractive forces between the positively charged hydrogens on the carbon atoms and the negatively charged hydrogens on the silicon atoms. The theoretical calculations also confirm the previous conclusions that the individual molecules (vapor) have C2v symmetry whereas in the solid the molecules become planar with D2h symmetry. The vibrational coupling between the ring-angle bending mode and the SiH2 in-phase rocking, which is present for the C2v structure, is forbidden for D2h and hence disappears.     

Synthesis of deoxy sugar esters: a chemoenzymatic stereoselective approach affording deoxy sugar derivatives also in the form of aldehyde

A chemoenzymatic synthesis of deoxy sugar esters is described. The synthesis is based on the O-alkylation of carboxylic acid with 2-bromo-5-acetoxypentanal. The method allows treatment of hydroxy carboxylic acids without protection of alcoholic hydroxyl groups. Several stereoisomeric deoxy sugar esters were resolved (up to ee or de > 98%) using a lipase-catalyzed acetylation of hemiacetals that in certain cases afforded deoxy sugar derivatives in the form of aldehydes. The stereochemistry of the reactions was determined by the NMR spectra of mandelic acid derivatives.     

Embedded conformon model of chain folding

The real-space renormalization-group technique is used to study the low lying energy states of a random copolymer composed of hydrophobic (H) and polar (P) beads on a simple cubic lattice. Application of a variety of boundary conditions to parts of the larger chain (embedded conformons) while progressively increasing the length scale gives the lowest energy states in agreement with exact calculations for a 17 bead chain with a random H,P sequence. These results are significant for studying minimalist models of the folding of complex molecules because the computation time is several orders of magnitude less than for other approaches.     

A meanfield approach to the thermodynamics of a protein-solvent system with application to the oligomerization of the tumor suppressor p53

The thermodynamic stability and oligomerization status of the tumor suppressor p53 tetramerization domain have been studied experimentally and theoretically. A series of hydrophilic mutations at Met-340 and Leu-344 of human p53 were designed to disrupt the hydrophobic dimer-dimer interface of the tetrameric oligomerization domain of p53. Meanfield calculations of the free energy of the solvated mutants as a function of interdimer distance were compared with experimental data on the thermal stability and oligomeric state [tetramer, dimer, or equilibrium mixture of both] of each mutant. The calculations predicted a decreasing stability and oligomeric state for the following amino acids at residue 340: Met [tetramer] > Ser Asp, His, Gin, > Glu, Lys [dimer], whereas the experimental results showed the following order: Met [tetramer] > Ser > Gln > His, Lys > Asp, Glu [dimers]. For residue 344, the calculated trend was Leu [tetramer] > Ala > Arg, Gln, Lys [dimer], and the experimental trend was Leu [tetramer] > Ala, Arg, Gln, Lys [dimer]. The discrepancy for the lysine side chain at residue 340 is attributed to the dual nature of lysine, both hydrophobic and charged. The incorrect prediction of stability of the mutant with Asp at residue 340 is attributed to the fact that within the meanfield approach, we use the wild-type backbone configuration for all mutants, but low melting temperatures suggest a softening of the α-helices at the dimer-dimer interface. This initial application of meanfield theory toward a protein-solvent system is encouraging for the application of the theoretical model to more complex systems.     

Fermi surface reconstruction by dynamic magnetic fluctuations

We demonstrate that nearly critical quantum magnetic fluctuations in strongly correlated electron systems can change the Fermi surface topology and also lead to spin charge separation in two dimensions. To demonstrate these effects, we consider a small number of holes injected into the bilayer antiferromagnet. The system has a quantum critical point (QCP) which separates magnetically ordered and disordered phases. We demonstrate that in the physically interesting regime, there is a magnetically driven Lifshitz point (LP) inside the magnetically disordered phase. At the LP, the topology of the hole Fermi surface is changed. We also demonstrate that in this regime, the hole spin and charge necessarily separate when approaching the QCP. The considered model sheds light on generic problems concerning the physics of the cuprates.     

Inverse error propagation and model identification for coupled dynamic problems with application to electromagnetic metal forming

The purpose of this work is the development and application of strategies to identify material model parameters for metals at high strain-rates using data obtained from high-speed electromagnetic metal forming. To this end, a staggered algorithm for the finite-element-based numerical solution of the coupled electromagnetic-mechanical boundary-value problem has been developed based on mixed Eulerian–Lagrangian multigrid methods. On this basis, the parameter determination together with a sensitivity analysis and error estimation are carried out. After verifying the validity of this approach using synthetic data sets, it is applied to the identification of material parameters using experimental results from electromagnetic tube forming.