以印染废水为主的城镇污水处理厂锑污染来源特征分析

为研究以印染废水为主的城镇污水处理厂锑污染来源特征,对浙江省嘉善县某污水处理厂及纳管行业进行水体锑（Sb）的采样分析,同时对印染和喷水纺织两大行业的锑污染源进行分析.研究表明,在污水处理厂纳管废水中,印染行业废水占纳管总量的55.2%,排锑量占总量的79.3%,是该污水处理厂锑污染的主要来源;在印染生产过程中,布料中锑的平均流失量为7 mg·kg^-1,平均损失率为13%,污染物锑在退浆、水洗和染色工艺段中的释放量依次为：染色 > 退浆 > 水洗;喷水纺织织造工艺中锑的释放量较少,布料中锑的平均流失量为2.2 mg·kg^-1,平均损失率仅为2.1%;污水处理厂进出水、印染各工段废水和织造废水中,锑主要以Sb（V）形态存在.     

大质量恒星的形成:理论与观测

文章简要叙述了有关大质量恒星形成的理论以及相关观测证据。目前大质量恒星形成的理论主要有两种，即吸积说和并合说．吸积说认为，大质量星可能与小质量星形成于相似的过程；并合说主张大质量星可能是由小质量年轻星碰撞合并而成．解决这两种理论争论的关键在于在大质量星附近能否观测到吸积盘的存在，最新的观测表明大质量星更有可能是通过吸积增加自身的质量，但最终解决这一问题可能还需要更多的观测证据。文章还提出了一些本领域尚未解决的问题，为感兴趣的研究者提供参考。     

浅谈如何合理性选配和组建物理实验仪器系统

介绍了浙江大学物理实验中心合理性选配和组建物理实验仪器系统的方法和经验,并以光学实验室为例展开探讨.     

Effective-Field Theory on High Spin Systems with Biaxial Crystal Field

Based on the effective-field theory with self-spin correlations and the differential operator technique,physical properties of the spin-2 system with biaxial crystal field on the simple cubic, body-centered cubic, as well as faced-centered lattice have been studied. The influences of the external longitudinal magnetic field on the magnetization,internal energy, specific heat, and susceptibility have been discussed in detail. The phenomenon that the magnetization in the ground state shows quantum effects produced by the biaxial transverse crystal field has been found.     

2.0μm附近模拟呼吸气体中~(13)CO_2/~(12)CO_2同位素丰度的高精度实时在线测量

采用可调谐二极管激光吸收光谱技术,结合一新型多通池搭建了一套模拟呼吸气体中CO_2同位素丰度的测量装置.气体的压强、温度和流速被很好地控制且均能保持长期的稳定性;采用三次多项式拟合光谱基线,对光谱进行归一化,很好地消除了功率变化对测量结果的影响;利用移窗-回归技术消除频率漂移对同位素丰度测量的影响.实验结果表明:移窗-回归法的引入不仅延长了系统的稳定时间,还提高了系统的测量精度;小波去噪的应用获得了比多光谱平均法高2倍的信噪比;系统的稳定时间为100 s;Kalman滤波后系统测量精度为0.067‰.     

槲皮素包裹修饰硅包银纳米颗粒作为荧光传感器对铜离子的识别作用

制备了一种基于天然产物槲皮素接枝硅包银核壳结构的纳米荧光传感器(Ag@SiO₂@Qc),对铜离子具有好的选择性和灵敏性。Ag@SiO₂@Qc与Cu2+离子结合后,荧光发射强度发生猝灭,并且可通过荧光滴定光谱得到了荧光滴定曲线：y = -32.864x+587.59(R2=0.998),其线性范围分别为：3×10-7~4.8×10-6 mol·L-1,最低检测限为1.0×10-7 mol·L-1。并且将Ag@SiO₂@Qc应用于环境中水样的检测结果的准确度好,精密度高,而且更加环保、方便、快捷,具有很大发展潜力与应用价值。     

应用分离涡模型计算斜圆柱孔气膜冷却

分离涡模型(DES,Detached eddy simulation)兼有雷诺时均湍流模型计算量较小和大涡模拟计算精度高的优点。本文利用DES对平板单斜圆柱孔的气膜冷却进行了数值模拟,并将结果同RANS湍流模型的计算结果以及实验数据相比较,表明DES能有效弥补RANS湍流模型在计算三维不均匀非定常湍流场的不足,更接近实际地反映了气膜冷却中的流动和换热的本质规律。     

Cerium oxide nanoparticles protect primary mouse bone marrow stromal cells from apoptosis induced by oxidative stress

The sintering of a silver (Ag) nanoparticle film by laser beam irradiation was studied using a CW DPSS laser. The laser sintering of the Ag nanoparticle thin film gave a transparent conductive film with a thickness of ca. 10 nm, whereas a thin film sintered by conventional heat treatment using an electronic furnace was an insulator because of the formation of isolated silver grains during the slow heating process. The laser sintering of the Ag nanoparticle thin film gave a unique conductive network structure due to the rapid heating and quenching process caused by laser beam scanning. The influences of the laser sintering conditions such as laser scan speed on the conductivity and the transparency were studied. With the increase of scan speed from 0.50 to 5.00 mm/s, the surface resistivity remarkably decreased from 4.45 × 10⁸ to 6.30 Ω/sq. The addition of copper (Cu) nanoparticles to silver thin film was also studied to improve the homogeneity of the film and the conductivity due to the interaction between the oxidized surface of Cu nanoparticle and a glass substrate. By adding 5 wt% Cu nanoparticles to the Ag thin film, the surface resistivity improved to 2.40 Ω/sq.     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

CFETR 堆体活化计算与分析

运用FLUKA计算程序对中国聚变工程实验堆(CFETR)进行了一维模拟活化运算,得出了产氚包层、屏蔽层、真空室结构材料、环向场线圈等模块的中子活化特性。计算结果表明,在聚变堆以200MW聚变功率持续稳态运行一年后,刚停堆时堆体的总活度为1.05×10 ¹⁹ Bq,停堆十年后堆体总活度为1.03×10 ¹⁷ Bq,此时堆体的主要残留放射性核素为⁵⁵ Fe。研究结果表明,目前CFETR的设计不存在突出的放射性环境安全问题。