Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

On the mechanism of THF catalyzed vinylic lithiation of allylamine derivatives: structural studies using 2-D and diffusion-ordered NMR spectroscopy

N-Lithio-N-(trialkylsilyl)allylamines can be deprotonated in the presence of ethereal solvents exclusively at the cis-vinylic position to yield 3,N-dilithio-N-(trialkylsilyl)allylamines under mild conditions. Low temperature (1)H and (7)Li NMR ((1)H NOESY, TOCSY, (1)H/(7)Li HSQC, and DO-NMR) studies on the solution structure of 3,N-dilithio-N-(tert-butyldimethylsilyl)allylamine identified three major aggregates in THF (monomer, dimer and tetramer), but the aggregate structures failed to explain the solvent dependence and regiochemical outcome of the reaction. Low temperature (1)H NMR (NOESY, TOCSY, DO-NMR) studies on the solution structure of N-lithio-N-(tert-butyldimethylsilyl)allylamine in the presence of nBuLi identified amide/nBuLi mixed aggregates in both the ethereal solvent THF (1:1 dimer) and the hydrocarbon solvent toluene (1:3 tetramer). Addition of 2 equiv of THF to toluene solutions induces the formation of the same THF solvated 1:1 dimer as observed in neat THF. NMR evidence suggests that in THF the mixed aggregate has close contact between the olefin and the beta-CH(2) of nBuLi, while in the absence of THF, the allyl chain appears to be pointed away from the nearest nBuLi residues.     

Transition metal methylene complexes : III. Methylene (CH2), a carbonyl analogous ligand; crystal structure of μ-methylenebis(carbonyl-η5-cyclopentadienylrhodium)(Rh—Rh

μ-Carbonylbis(carbonyl-ν⁵-cycopentadienylrhodium)(Rh—Rh) reacts with N-methyl-and N-ethyl-N-nitrosourea in boiling benzene to yield the dinuclear, diamagnetic, neutral rhodium complexes μ-methylene- (A) and μ-ethylidenebis(carbonyl-η⁵-cyclopentadienylrhodium)(Rh—Rh) (B), respectively. Deuterium labelled experiments prove the origin of the metal-stabilized methylene ligand to be the alkyl group of the organic precursor. This new method of preparation of transition metal—methylene complexes may be used as an alternative to the commonly used diazo method; the latter method was shown to work with diazodiethylmalonate and dicarbonyl-η⁵-cyclopentadienylrhodium, the reaction yielding μ-bis(ethoxycarbonyl)methylenebis(carbonyl-η⁵-cyclopentadienylrhodium)(Rh—Rh).Compound A crystallizes in the triclinic system, P$\text{1}$, and with cell constants of a 803.42(5), b 909.98(6), c 938.81(2) pm, α 74.402(3), β81.923(3), and γ 83.685(6)°. The unit cell volume and the calculated density are 651.6 ų and 2.069 g cm^-3, for one molecule in the asymmetric unit. The molecular geometry of μ-CH₂[η⁵-C₅H₅Rh(CO)]₂ was established from 2718 unique reflections collected with a computer-controlled diffractometer and refined to a final R(F) = 0.0379. The molecular parameters derived from the single-crystal X-ray study conform to a remarkable degree with those found for μ-CO[η⁵-C₅H₅Rh(CO)]₂. Thus, the bridging ligands CH₂ and CO seem to be analogous in their effects on the structural characteristics of the molecular framework of the two molecules.     

2-Oxocephems. Synthesis and Properties of 7-Acylamino-2-oxocephem-4-carboxylic Acids

A synthesis of (6 R, 7 R)-7-acylamino-2-oxocephem-4-carboxylic acids from penicillins is reported based on the formation of the 2-oxocephem system in an intramolecular Wittig condensation. An interesting steric effect of the acylamino grouping on the course of this key step was used to advantage. Some physical and biological properties of this new type of Δ³-cephem are described.     

Solid state and solution conformation of 2-pyridinecarboxylic acid hydrazides: a new structural motif for foldamers

X-Ray crystallography and NMR show a strong preference for trans conformers of N′-phenyl or N′-(2-pyridyl) 2-pyridinecarboxylic acid hydrazides, stabilized by an NHN_pyr. intramolecular hydrogen bond both in the solid state and in solution. This allows us to extrapolate that oligomers of this unit should adopt extended linear conformations.     

Silylstannation of terminal alkynes using a recyclable palladium(0) catalyst immobilised in an ionic liquid

Silylstannanes can be regioselectively added across terminal alkynes in a quantitative fashion in the presence of a palladium(0) catalyst immobilised in the [bmim]PF6 ionic liquid which can be recycled without loss of activity.     

Dendrimeric Gd(III) complex of a monophosphinated DOTA analogue: optimizing relaxivity by reducing internal motion

A marked increase of relaxivity has been observed upon rigidifying the internal frame of Gd-containing PAMAM dendrimers: the effect has been attained by either protonation of the dendrimer or by forming supramolecular adducts with cationic polyaminoacids.     

Synthesis of a homoleptic niobium(V) thiolate complex and the preparation of niobium sulfide via thio "sol-gel" and vapor phase thin-film experiments

Reaction of [Nb(NMe(2))(5)] with 10 equiv of 2,6-Me(2)C(6)H(3)SH in toluene results in the formation of red crystals of [Nb(SC(6)H(3)Me(2)-2,6)(5)]. Crystal structure analysis of [Nb(SC(6)H(3)Me(2)-2,6)(5)] showed that the niobium center adopts a distorted trigonal bipyramidal geometry. Niobium disulfide, NbS(2), has been successfully prepared via a thio "sol-gel" process using [Nb(SC(6)H(3)Me(2)-2,6)(5)] as the metal source. In contrast, vapor phase thin-film studies revealed that [Nb(SC(6)H(3)Me(2)-2,6)(5)] functions as a single-source precursor to NbS films.     

Benzenoid Molecules with Uniform Distribution of π-Electrons within Rings

Summary. In a recent work it was demonstrated that in linear hexagonal chains the distribution of π-electrons into rings (as computed by means of the Randić–Balaban method) is uniform, irrespective of the nature of the terminal fragments. We now establish that an analogous, yet somewhat more complex, uniformity in the π-electron distribution exists also in double linear hexagonal chains, as well as in some other benzenoid systems.