Positron studies of hydrogen-defect interactions in proton irradiated molybdenum

Molybdenum single crystals are irradiated at 20 K with 6 MeV protons. The radiation damage and lattice defect annealing is studied by positron lifetime spectroscopy in the temperature range from 15 to 720 K. Loss of vacancies due to recombination with mobile interstitials is observed at 40 K (Stage I) in agreement with resistivity measurements. This is the first time Stage I is observed by positrons below 77 K. The implanted hydrogen decorates the vacancies around 100 K, which is consistent with a hydrogen migration energy in molybdenum:E _M ^H = 0.3–0.4 eV. Clustering of spatially correlated vacancies takes place in a wide temperature region below the usual vacancy clustering stage (Stage III). Stage III is observed at rather low temperatures (400–480 K) due to the very high vacancy concentration. Hydrogen bound to vacancies and vacancy clusters is released above 540 K, which puts an upper limit to the hydrogen binding energy:E _B ^H 1.4 eV. The present work emphasizes the advantage of employing a vacancy sensitive technique to study hydrogen in metals, where its intrinsic solubility is low. In such metals (as molybdenum) both the effective solubility and the effective mobility of hydrogen are strongly influenced by the presence of vacancies.     

Use of high-molecular-mass polyacrylamides as matrices for microchip electrophoresis of DNA fragments

DNA fragment analysis requires the use of polymer solutions as sieving matrices. Generally, such matrices are constituted of high-molar-weight polymers employed at a concentration higher than their entanglement threshold concentration. These polymer solutions are highly viscous and difficult to use in the narrow channels of a microchip. Ultralarge polyacrylamides synthesized via a nonconventional method, being the low-temperature plasma-induced polymerization (PIP), were used as DNA sieving matrices for microchip electrophoresis. The distinctive features of these polymers (ultralarge molecular mass and linearity) allow their use at a dilute concentration. Dilute PIP polyacrylamides revealed a constant value of resolution in a broad range of DNA fragment sizes (123 bp-1353 bp), thus proving to be effective in common genotyping applications. Moreover, the low viscosity of the dilute solutions enable it to be easier and faster in filling the channel between runs, thus enhancing the throughput of the microchip devices.     

Algebraic Kekulé structures of benzenoid hydrocarbons

An algebraic Kekulé structure of a benzenoid hydrocarbon is obtained from an ordinary Kekulé structure by inscribing into each hexagon the number of pi-electrons which (according to this Kekulé structure) belong to this hexagon. We show that in the case of catafusenes, there is a one-to-one correspondence between ordinary and algebraic Kekulé structures. On the other hand, in the case of perifusenes, one algebraic Kekulé structure may correspond to several ordinary Kekulé structures.     

Dynamic NMR Studies of Some Halo and Mercaptide Bridged Palladium (II) Dimers

Some halo or mercaptide bridged palladium (II) dimers, [Pd(S₂CNR₂)X]₃ (R=ibutyl, X=Cl, Br, I, S-ethyl and S-t-butyl) were studied by variable temperature ¹H nmr spectroscopy. Line shape changes of the chloro and bromo bridged dimers were interpretated by the solvolytic breaking of the Pd-X bond, while mercaptide bridged complexes were explained in terms of slow N-C single bond rotation. The results consist with the strengthness of the class b metal ion with various soft donor ligands.     

Quantitative approach to hückel rule the relations between the cycles of a molecular graph and the thermodynamic stability of a conjugated molecule

Contribution of the rings to the total π-electron energy (CE) is calculated for a number of polycyclic conjugated hydrocarbons. The Hückel 4m+2 rule is tested quantitatively in this way. It is shown that (4m)-membered rings always destabilize, while (4m + 2)-membered rings almost always stabilize the molecule. The magnitude of this effect is, however, subject to considerable variations. The main factors which determine the magnitude of CE are discussed. Examples of the alternant hydrocarbons are found for which the (4m + 2)-membered cycles have a destabilizing effect, and therefore violate the Hückel rule. The odd membered cycles are shown to have a negligibly small effect on the stability of the conjugated molecules.     

Core-shell nanostructures from single poly(N-vinylcaprolactam) macromolecules: stabilization and visualization

Formation of core-shell poly(N-vinylcaprolactam) (PVCL) single-molecule nanostructures due to interaction of PVCL with metal ions was studied using transmission electron microscopy, 13C NMR, and light scattering. This study demonstrates that addition of CoCl2 to PVCL in its globular conformation yields unimolecular core-shell polymer particles with the core decorated with Co(II) ions. The crucial condition for formation of well-defined unimolecular nanostructures is the presence of stable globular aggregates in aqueous solution. Moreover, the metal ions should have a sufficiently high coordination number (higher than 2) to provide a cross-linking and stabilization of the core.     

Synthesis and optical properties of thiol-stabilized PbS nanocrystals

Thiol-capped water-soluble PbS nanocrystals (NCs) stabilized with 1-thioglycerol, dithioglycerol, or a mixture of 1-thioglycerol/dithioglycerol (TGL/DTG) were prepared via one-stage synthesis at room temperature. We found that NCs stabilized with a TGL/DTG mixture show efficient and stable infrared photoluminescence centered in the second "biological window" (1050-1200 nm). Under optimized conditions, full width at half-maximum of the PL emission peak was from 70 to 100 nm. PbS NCs were stable to precipitation and aggregation for the time period from 2 to 3 months when stored in the dark under room temperature. Room-temperature photoluminescence quantum efficiency of NCs was from 7 to 10%. When NCs were stored at 37 degrees C, their PL emission red-shifted, consistent with the NC growth.     

Preparation and separation of all possible rotamers of a stereochemical analog of meso-tartaric acid: optically inactive and optically active isomers of (R,S)-2,2′-bis(methoxycarbonyl)-6,6′-dimethyl-9,9′-bitriptycyl

All the three possible rotamers of the title compound were separated by chromatography, and unambiguously identified by NMR and X-ray analysis. One of the isomers was optically inactive C_i conformation. The other optical active forms were resolved to give a pair of enantiomers, which were characterized by optical rotation and CD spectra. Thus the optical inactivity of a compound such as meso-tartaric acid that can take C_i conformation in solution, is now ascribed to that the molecule has an optically inactive C_i conformer and equal amounts of optically active conformers, that are enantiomers, in solution.     

Photochemically catalyzed reaction of ochratoxin A with D- and L-cysteine

The photolysis (>300 nm) of ochratoxin A (OTA, N-[[(3R)-5-chloro-8-hydroxy-3-methyl-1-oxo-7-isochromanyl]carbonyl]-3-phenyl-L-alanine, 1) in the presence of excess (2 and 12 molar equiv) cysteine (CySH) has been investigated and found to yield sulfur adducts 5 and 6 that are characterized by liquid chromatography-mass spectrometry and 1H-NMR spectroscopy. The adduct 5 was ascribed to the Michael addition conjugate resulting from covalent attachment of CySH to the ochratoxin quinone (4) generated by photooxidation of OTA. This species was also formed by photolysis of a synthetic sample of the hydroquinone of OTA (ochratoxin hydroquinone, 3) in the presence of 12 equiv L-CySH. The conjugate 5 derived from photolysis of 3 with L-CySH was used for 1H-NMR analysis. The sulfur adduct 6 was the major species detected from covalent attachment of CySH to photoactivated OTA, and it resulted from direct displacement of the OTA Cl atom by CySH. The implications of the cysteinyl adducts to the in vivo toxicity of OTA are discussed, with particular emphasis given to conjugate 5, as products from the photooxidative pathway may be of relevance to the nephrotoxic properties of OTA.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.