Bimetallic Iron–Palladium Catalyst System as a Lewis-Acid for the Synthesis of Novel Pharmacophores Based Indole Scaffold as Anticancer Agents

The Friedel–Crafts reaction between substituted indoles as nucleophiles with chalcones-based benzofuran and benzothiophene scaffolds was carried out by employing a highly efficient bimetallic iron–palladium catalyst system. This catalytic approach produced the desired bis-heteroaryl products with low catalyst loading, a simple procedure, and with acceptable yield. All synthesized indole scaffolds 3a–3s were initially evaluated for their cytotoxic effect against human fibroblast BJ cell lines and appeared to be non-cytotoxic. All non-cytotoxic compounds 3a–3s were then evaluated for their anticancer activities against cervical cancer HeLa, prostate cancer PC3, and breast cancer MCF-7 cell lines, in comparison to standard drug doxorubicin, with IC₅₀ values 1.9 ± 0.4 µM, 0.9 ± 0.14 µM and 0.79 ± 0.05 µM, respectively, and appeared to be moderate to weak anticancer agents. Fluoro-substituted chalcone moiety-containing compounds, 3b appeared to be the most active member of the series against cervical HeLa (IC₅₀ = 8.2 ± 0.2 µM) and breast MCF-7 cancer cell line (IC₅₀ = 12.3 ± 0.04 µM), whereas 6-fluroindol-4-bromophenyl chalcone-containing compound 3e (IC₅₀ = 7.8 ± 0.4 µM) appeared to be more active against PC3 prostate cancer cell line.     

Exogenous Sodium Nitroprusside Mitigates Salt Stress in Lentil (Lens culinaris Medik.) by Affecting the Growth,Yield, and Biochemical Properties

Soil salinity disrupts the physiological and biochemical processes of crop plants and ultimately leads to compromising future food security. Sodium nitroprusside (SNP), a contributor to nitric oxide (NO), holds the potential to alleviate abiotic stress effects and boost tolerance in plants, whereas less information is available on its role in salt-stressed lentils. We examined the effect of exogenously applied SNP on salt-stressed lentil plants by monitoring plant growth and yield-related attributes, biochemistry of enzymes (superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD)) amassing of leaf malondialdehyde (MDA) and hydrogen peroxide (H₂O₂). Salinity stress was induced by NaCl application at concentrations of 50 mM (moderate salinity) and 100 mM (severe salinity), while it was alleviated by SNP application at concentrations of 50 µM and 100 µM. Salinity stress severely inhibited the length of roots and shoots, the relative water content, and the chlorophyll content of the leaves, the number of branches, pods, seeds, seed yield, and biomass per plant. In addition, MDA, H₂O₂ as well as SOD, CAT, and POD activities were increased with increasing salinity levels. Plants supplemented with SNP (100 µM) showed a significant improvement in the growth- and yield-contributing parameters, especially in plants grown under moderate salinity (50 mM NaCl). Essentially, the application of 100 µM SNP remained effective to rescue lentil plants under moderate salinity by regulating plant growth and biochemical pathways. Thus, the exogenous application of SNP could be developed as a useful strategy for improving the performance of lentil plants in salinity-prone environments.     

An updated review of nanofluids in various heat transfer devices

Journal of Thermal Analysis and Calorimetry - The field of nanofluids has received interesting attention since the concept of dispersing nanoscaled particles into a fluid was first introduced in...     

Synthesis,Antibacterial, and Antioxidant Evaluation of Novel Series of Condensed Thiazoloquinazoline with Pyrido,Pyrano, and Benzol Moieties as Five- and Six-Membered Heterocycle Derivatives

A novel synthesis of thiazolo[2,3-b]quinazolines 4(a–e), pyrido[2′,3′:4,5]thiazolo[2,3-b]quinazolines {5(a–e), 6(a–e), and 7(a–e)}, pyrano[2′,3′:4,5]thiazolo[2,3-b]quinazolines 8(a–e), and benzo[4,5]thiazolo[2,3-b]quinazoloine9(a–e) derivatives starting from 2-(Bis-methylsulfanyl-methylene)-5,5-dimethyl-cyclohexane-1,3-dione 2 as efficient α,α dioxoketen dithioacetal is reported and the synthetic approaches of these types of compounds will provide an innovative molecular framework to the designing of new active heterocyclic compounds. In our study, we also present optimization of the synthetic method along with a biological evaluation of these newly synthesized compounds as antioxidants and antibacterial agents against the bacterial strains, like S. aureus, E. coli, and P. aeruginosa. Among all the evaluated compounds, it was found that some showed significant antioxidant activity at 10 μg/mL while the others exhibited better antibacterial activity at 100 μg/mL. The results of this study showed that compound 6(c) possessed remarkable antibacterial activity, whereas compound 9(c) exhibited the highest efficacy as an antioxidant. The structures of the new synthetic compounds were elucidated by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR.     

Kinetic Behavior of Quaternary Ammonium Hydroxides in Mixed Methane and Carbon Dioxide Hydrates

This study evaluates the kinetic hydrate inhibition (KHI) performance of four quaternary ammonium hydroxides (QAH) on mixed CH₄ + CO₂ hydrate systems. The studied QAHs are; tetraethylammonium hydroxide (TEAOH), tetrabutylammonium hydroxide (TBAOH), tetramethylammonium hydroxide (TMAOH), and tetrapropylammonium hydroxide (TPrAOH). The test was performed in a high-pressure hydrate reactor at temperatures of 274.0 K and 277.0 K, and a concentration of 1 wt.% using the isochoric cooling method. The kinetics results suggest that all the QAHs potentially delayed mixed CH₄ + CO₂ hydrates formation due to their steric hindrance abilities. The presence of QAHs reduced hydrate formation risk than the conventional hydrate inhibitor, PVP, at higher subcooling conditions. The findings indicate that increasing QAHs alkyl chain lengths increase their kinetic hydrate inhibition efficacies due to better surface adsorption abilities. QAHs with longer chain lengths have lesser amounts of solute particles to prevent hydrate formation. The outcomes of this study contribute significantly to current efforts to control gas hydrate formation in offshore petroleum pipelines.     

Structural,Magnetic and Catalytic Properties of a New Vacancy Ordered Perovskite Type Barium Cobaltate BaCoO2.67

A new vacancy ordered, anion deficient perovskite modification with composition of BaCoO_2.67 (Ba₃Co₃O₈□₁) has been prepared via a two-step heating process. Combined Rietveld analysis of neutron and X-ray powder diffraction data shows a novel ordering of oxygen vacancies not known before for barium cobaltates. A combination of neutron powder diffraction, magnetic measurements, and density functional theory (DFT) studies confirms G-type antiferromagnetic ordering. From impedance measurements, the electronic conductivity of the order of 10⁻⁴ S cm⁻¹ is determined. Remarkably, the bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is found to be comparable to that of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–y, confirming that charge-ordered anion deficient non-cubic perovskites can be highly efficient catalysts.     

Hydrophobic modification of nanocellulose and all-cellulose composite films using deep eutectic solvent as a reaction medium

Cellulose - In this work, deep eutectic solvent (DES) based on imidazole and triethylmethylammonium chloride was used as a reaction medium for the esterification of cellulose nanofiber (CNF) and...     

The intragastrointestinal fate of paclitaxel-loaded micelles: Implications on oral drug delivery

The goal of the present study is to elucidate the intragastrointestinal fate of micellar delivery systems by monitoring fluorescently labeled different micelles and the model drug paclitaxel (PTX). Both in vitro and ex vivo leakage studies showed fast PTX release in fluids while micelles remained intact, except in fed-state simulated intestinal fluid and fasted-state pig intestinal fluid, thus referring to the intact absorption of micelles and PTX leakage in the gastrointestinal tract with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) micelles showing higher stability than other micelles. All groups of micelles were absorbed intact in Caco-2 and Caco-2/HT29-MTX cell models and the absorption of TPGS micelles was found to be higher than other micelles. The transport of the micelles across Caco-2/Raji (1.6%–3.5%), Caco-2 (0.8%–1%), and Caco-2/HT29-MTX (0.58%–1%) cell monolayers further verified the absorption of micelles and their subsequent transport; however, more TPGS micelles transported across cell monolayers than other groups. Moreover, the histological examination also confirmed that micelles entered the enterocytes and were transported to basolateral tissues and TPGS showed the stronger ability of penetration than other groups. Thus, these results are succinctly presenting the absorption of intact micelles in GIT confirmed by imaging evidence with prior leakage of the drug, uptake by enterocytes and the transport of micelles that survive the digestion by enterocytes and mainly by microfold cells in material nature dependent way with TPGS showing better results than other groups. In conclusion, these results identify the mechanism by which the gastrointestinal tract processes micelles and point to the likely use of this approach in the design of micelles-based therapies.     

Fabrication of a Single Layer and Bilayer Potentiometric Biosensors for Penicillin by Galvanostatic Entrapment of Penicillinase into Polypyrrole Films

A single layer and bilayer potentiometric biosensors for the detection of penicillin have been developed. The favourable conditions that were established for the polypyrrole‐penicillinase ((PPy‐P’nase) single layer biosensor were 0.03 M pyrrole, 50 U/mL P’nase, 0.01 M penicillin, applied current density of 0.9 mA/cm² and a polymerisation time of 40 s. The optimum conditions for the formation of the outer layer of the bilayer were: (a) 0.1 M Py, 19 U/mL P’nase, 0.01 M pen, current density of 0.9 mA/cm² and a polymerisation time of 40 s. The minimum detectable penicillin concentration with the bilayer potentiometric biosensor was 0.3 µM and the linear concentration range was 7.5–146 µM. The average percentage recovery of penicillin that was found in amoxycillin 500 mg was 113±24 %. The determination of penicillin in milk was fraught with problems of non‐specific binding of penicillin to the milk.     

The Use of Poly(Vinyl Alcohol) to Cross‐link Penicillinase for the Fabrication of a Penicillin Potentiometric Biosensor

Chemically cross‐linked PVA films are permeable matrices for the fabrication of biosensors. PVA provides an attractive immobilisation method as it preserves the enzymatic activity. Penicillinase (P’nase) was cross‐linked with poly(vinyl alcohol) (PVA) and bovine serum albumin (BSA). The optimum conditions for the of BSA‐PVA‐P’nase film were: 2.5 % w/v PVA, 0.006 % w/v BSA, 2.4 mM penicillin (Pen) and 16 U/mL P’nase. The minimum detectable concentration was 1.7 µM. The linear concentration range obtained for the BSA‐PVA film was 7.5–283 µM. The BSA‐PVA P’nase biosensor detected penicillin in amoxycillin with an average percentage recovery of 97±12 %. Higher penicillin concentrations (10–20 ppm) were detected more successfully than lower concentrations (≤5 ppm). These results indicate that further work is required to enable the successful detection of lower penicillin concentrations such as 5 ppm.