Application of ion-exchange cartridge clean-up in food analysis IV. Confirmatory assay of benzylpenicillin, phenoxymethylpenicillin, oxacillin, cloxacillin, nafcillin and dicloxacillin, in bovine tissues by liquid chromatography-electrospray ionization tandem mass spectrometry

A multiresidue analytical method was developed for the confirmation of benzylpenicillin (PCG), phenoxymethylpenicillin (PCV), oxacillin (MPIPC), cloxacillin (MCIPC), nafcillin (NFPC) and dicloxacillin (MDIPC) in bovine tissues using electrospray ionization liquid chromatography-tandem mass spectrometry (LC-ESI-MS-MS) with a product ion scan mode. All penicillins gave [M-H]-, [M-H-CO2]- and [M-H-141]- as the product ion, when [M-H]- was selected as the precursor ion. Combination of an ion-exchange cartridge clean-up and the LC-ESI-MS-MS method can reliably identify all of these penicillins fortified at a concentration of 0.05 mg/kg in bovine tissues, including liver, kidney and muscle. The limits of confirmation satisfy the maximum residue limits for each of the penicillins established by the World Health Organization, US Food and Drug Administration, European Union and Japan.     

Effects of dipole moment, linkers, and chromophores at side chains on long-range electron transfer through helical peptides

Octadecapeptides carrying a ferrocene moiety at the molecular terminal were self-assembled on gold, and long-range electron transfer from the ferrocene moiety to gold was investigated by electrochemical methods. Effects on electron transfer of dipole moment of helical peptides, linkers connecting the peptide to gold, and chromophores introduced into the side chains were discussed. Cyclic voltammetry of the monolayers in an aqueous solution revealed that long-range electron transfer over 40 A occurred along the peptide molecule. Chronoamperometry showed that the long-range electron transfer should be ascribed to a hopping mechanism with use of amide groups as hopping sites. Electron transfer through the long peptide was not significantly accelerated by the dipole moment. However, the linker remarkably affected electron transfer depending on whether it was a methylene chain or a phenylene group, suggesting that local electron transfer between gold and the peptides should be the slowest step to determine the overall rate. Pyrenyl groups introduced into the side chains in the middle of the peptide molecule did not noticeably change electron transfer, probably because pyrenyl groups were too distant to allow direct electron transfer between them. Electrostatic potential profiles across the peptide monolayers were also calculated to explain reasonably the several interesting features in the present peptide systems.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Synthetic studies directed toward the assembly of the C-glycoside fragment of the telomerase inhibitor D8646-2-6

[reaction: see text] Construction and characterization of the C-glycosidic moiety of telomerase inhibitor D8646-2-6 (1) are described. This is the first example of the C-glycosylation using electron-poor aromatics, 4-hydroxypyrone, as a glycosyl acceptor. The glycosylation reaction and base-promoted isomerization affords desired beta-C-glycoside in a 61% overall yield.     

The first synthesis of a methano[60]fullerene with an electron-donating group at the methano-bridge carbon: synthesis and reaction of aminomethano[60]fullerene

[reaction: see text] Aminomethano[60]fullerene was synthesized for the first time as a trifluoromethanesulfonic acid salt by applying the Curtius rearrangement of azidocarbonylmethano[60]fullerene as the key reaction. Aminomethano[60]fullerene thus obtained was found to be able to react with various acyl chlorides to afford the corresponding amides.     

Structure and ethanol complexation of cyclic tetrasaccharide in aqueous solution studied by NMR and molecular mechanics

The structure and ethanol complexation of a cyclic tetrasaccharide (CTS) in aqueous solution were investigated by proton NMR spectroscopy and molecular mechanics calculations. Two glucose units, A and B, of CTS are alternatively bonded by alpha-1,3 and alpha-1,6 linkages. The overlapped signals of protons A5, A6S, A6R, B3, B6S and B6R were resolved by spectral simulations to determine their chemical shifts and vicinal coupling constants. All vicinal coupling constants except for the A5-A6 spin system are consistent with the dihedral angles in the X-ray crystal structure. Each of protons A5, A6S, and A6R in the two units of A is equivalent with respect to the chemical shift. The vicinal coupling constants of (3)J(5-6S) and (3)J(5-6R) for unit A are close to the average of two rotamers that are present in crystals. The intensities of cross-peaks in the rotating frame nuclear Overhauser effect spectroscopy (ROESY) spectrum were rather well correlated with the effective distances calculated for the X-ray structure and molecular mechanics structures calculated in vacuo and water, although they are slightly better correlated with molecular mechanics structure in vacuo than with the other structures. From the changes of the chemical shifts of several CTS protons with increasing ethanol concentration, it was suggested that adsorption sites of ethanol on the plate structure of CTS are protons B2 and B4 (site B) in the concave face side and protons A1 and A2 (site A) in the convex back side. The binding constants for sites A and B are 0.0061 and 0.0176 M(-1), respectively. These binding constants are much smaller than a value of 4.1 M(-1) for the ethanol-alpha-cyclodextrin complex.     

Ring‐Opening Reactions of 3‐Aryl‐1‐benzylaziridine‐2‐carboxylates and Application to the Asymmetric Synthesis of an Amphetamine‐Type Compound

Nucleophilic ring‐opening reactions of 3‐aryl‐1‐benzylaziridine‐2‐carboxylates were examined by using O‐nucleophiles and aromatic C‐nucleophiles. The stereospecificity was found to depend on substrates and conditions used. Configuration inversion at C(3) was observed with O‐nucleophiles as a major reaction path in the ring‐opening reactions of aziridines carrying an electron‐poor aromatic moiety, whereas mixtures containing preferentially the syn‐diastereoisomer were generally obtained when electron‐rich aziridines were used (Tables 1–3). In the reactions of electron‐rich aziridines with C‐nucleophiles, S_N2 reactions yielding anti‐type products were observed (Table 4). Reductive ring‐opening reaction by catalytic hydrogenation of (+)‐trans‐(2S,3R)‐3‐(1,3‐benzodioxol‐5‐yl)aziridine‐2‐carboxylate (+)‐trans‐ 3c afforded the corresponding α‐amino acid derivative, which was smoothly transformed into (+)‐tert‐butyl [(1R)‐2‐(1,3‐benzodioxol‐5‐yl)‐1‐methylethyl]carbamate((+)‐ 14 ) with high retention of optical purity (Scheme 6).     

Improvement of chemical analysis of antibiotics. IX. A simple method for residual tetracyclines analysis in honey using a tandem cartridge clean-up system

A simple, rapid and precise analytical method for the residual tetracyclines in honey has been established using a tandem cartridge clean-up system (prepacked reversed-phase and ion-exchange cartridges) followed by high-performance liquid chromatography. The recoveries of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC) and doxycycline (DC) from honey spiked at a level of 1.0 ppm are 87.1, 85.3, 98.0 and 99.0%, respectively, with coefficients of variation of 1.1-3.9%. The detection limits in honey are 0.02 ppm for OTC and TC, and 0.05 ppm for CTC and DC, respectively. The time required for the analysis of four samples is only 1 h.     

Structural disorder in Ba0.6Sr0.4Al2O4

The structural disorder in Ba_0.6Sr_0.4Al₂O₄ (space group P6₃22) was investigated by X-ray powder diffraction and selected-area electron diffraction (SAED). The initial structural model was determined using direct methods, and it was further modified by the combined use of Rietveld method and maximum-entropy method (MEM). MEM-based pattern fitting method was subsequently applied, resulting in the final reliability indices of R_wp=9.61%, R_p=6.96%, R_B=1.40% and S=1.25. The electron density distribution was satisfactorily expressed by the split-atom model in which the strontium/barium and oxygen atoms were split to occupy the lower symmetry sites. The diffuse scattering in SAED was mainly attributable to the positional disorder of oxygen atoms.     

Facile peptide thioester synthesis via solution-phase tosylamide preparation

Preparation of peptide thioester is essential for native chemical ligation and block condensation. Our novel methodology involves conversion of the carboxylic acid of a peptide into a thioester using p-toluenesulfonyl isocyanate, followed by alkylation, then thiol substitution. Our methodology can also be used for the preparation of glycopeptide thioesters. Furthermore, it is possible to carry out the reaction as a sequential peptide chemical ligation.