Wave functions derived from experiment. V. Investigation of electron densities,electrostatic potentials,and electron localization functions for noncentrosymmetric crystals

The constrained Hartree-Fock method using experimental X-ray diffraction data is extended and applied to the case of noncentrosymmetric molecular crystals. A new way to estimate the errors in derived properties as a derivative with respect to added Gaussian noise is also described. Three molecular crystals are examined: ammonia [NH(3)], urea [CO(NH(2))(2)], and alloxan [(CO)(4)(NH)(2)]. The energetic and electrical properties of these molecules in the crystalline state are presented. In all cases, an enhancement of the dipole moment is observed upon application of the experimental constraint. It is found that the phases of the structure factors are robustly determined by the constrained Hartree-Fock model, even in the presence of simulated noise. Plots of the electron density, electrostatic potential, and the electron localization function for the molecules in the crystal are displayed. In general, relative to the Hartree-Fock model, there is a depletion of charge around hydrogen atoms and lone pair regions, and a build-up of charge within the molecular framework near nuclei, directed along the bonds. The electron localization function plots reveal an increase in the pair density between vicinal hydrogen atoms.     

Peracid-mediated n-oxidation and rearrangement of dimethylphosphoramides: plausible model for oxidative bioactivation of the carcinogen hexamethylphosphoramide (HMPA)

Dimethylphosphoramides react with $\text{m}$-chloroperoxybenzoic acid (MCPBA) in anhydrous acetone to yield the previously unknown $\text{P}$-dimdethylamino-oxyphosphonous derivatives $\text{via}$$\text{N}$-oxidation and rearrangement. Further MCPBA oxidation yields formaldehyde and nitrosomethane, isolated as its $\text{trans}$-dimer. These reactions provide a possible biomimetic model for the metabolic activation of hexamethylphosphoramide as a mutagen and carcinogen.     

Synthesis of novel discodermolide analogues with modified hydrogen-bonding donor/acceptor sites

A series of novel structural analogues of the potent microtubule-stabilizing anticancer agent discodermolide were synthesised, with modifications in the C16-C20 region to create new oxygenated H-bonding donor/acceptor sites for tubulin binding. By starting from an advanced C9-C24 intermediate, fully synthetic discodermolide analogues, incorporating either an additional hydroxyl group 3, an oxetane 4 or a cyclic carbonate 5, were obtained in 10 or 11 steps by using a versatile aldol construction of the C6-C7 bond.     

The Structure of the Antibiotic Hedamycin. I. Chemical,Physical and Spectral Properties

Interpretation of the chemical and spectral (IR., UV., ¹H- and ¹³C-NMR.) properties of the antitumor antibiotic hedamycin (C₄₁H₅₀N₂O₁₁) suggests that the molecule contains a methyl substituted 1-hydroxyanthraquinone nucleus, an α, β-unsaturated ketone, two sugar-like tetrahydropyran rings ( 4 and 8 ) and an aliphatic chain 2 , presumably with an epoxy group (see the Scheme).     

Barrierless electron transfer bond fragmentation reactions

The ultrafast N-O bond fragmentation in a series of N-methoxypyridyl radicals, formed by one-electron reduction of the corresponding N-methoxypyridiniums, has been investigated as potentially barrierless electron-transfer-initiated chemical reactions. A model for the reaction involving the electronic and geometric factors that control the shape of the potential energy surface for the reaction is described. On the basis of this model, molecular structural features appropriate for ultrafast reactivity are proposed. Femtosecond kinetic measurements on these reactions are consistent with a kinetic definition of an essentially barrierless reaction, i.e., that the lifetime of the radical is a few vibrational periods of the fragmenting bond, for the p-methoxy-N-methoxypyridyl radical.     

Rhodium(I) catalyst supported on polymer crystal surfaces: Further hydrogenation studies

Catalysts bound to polymers in the form of crosslinked beads have been demonstrated to have a number of advantages over homogeneous catalysts. However, there are several problems that exist due to the polymer support being in the form of a bead. The rate of reaction depends on the presence of solvents that adequately swell the bead in order to allow access to the catalytic sites. Differences in polarity and reactant size can inhibit diffusion into the bead. Recently a new system has been developed whereby tris(triphenyl phosphine) chlororhodium (I) (Wilkinson's catalyst) is bound to the surface of polyethylene single crystals. Polyethylene single crystals have a very high surface to volume ratio allowing for greater ease of reaction compared to a bead system. In a previous paper we showed that there is a dramatic increase in catalytic activity and that the reaction rate increased as the polarity of solvent was increased, even in ethanol where the homogeneous catalyst is not soluble and the polystyrene bead support would not swell. In this letter we are describing the activity of hydrogenation of olefins contained in both large and/or polar molecules. The results demonstrate the advantages of supported catalysts on polyethylene single crystals rather than on polymer beads.     

On the numerical evaluation of singular integrals

Product-integration rules of the form _–1 ¹ k(x)f(x)dx _i ⁼¹ⁿ w _ni f(x _ni ) are studied, with the points {w _ni } chosen to be the zeros of certain orthogonal polynomials, and the weights {w _ni } chosen to make the rule exact iff is any polynomial of degree less thann. If, in particular, the points are the Chebyshev points, and ifk L _p [–1, 1] for somep>1, then it is shown that the rule converges to the exact result for all continuous functionsf. With this choice of points, the practical application of the rule is shown to be straightforward in many cases, and to yield satisfactory rates of convergence. The casek(x)=|–x|, >–1, is studied in detail. Results of a similar, but weaker, kind are also obtained for other choices of the points {x _ni }.     

Driving high quantum yield NIR emission through proquinoidal linkage motifs in conjugated supermolecular arrays

High quantum yield NIR fluorophores are rare. Factors that drive low emission quantum yields at long wavelength include the facts that radiative rate constants increase proportional to the cube of the emission energy, while nonradiative rate constants increase in an approximately exponentially with decreasing S₀–S₁ energy gaps (in accordance with the energy gap law). This work demonstrates how the proquinoidal BTD building blocks can be utilized to minimize the extent of excited-state structural relaxation relative to the ground-state conformation in highly conjugated porphyrin oligomers, and shows that 4-ethynylbenzo[c][1,2,5]thiadiazole (E-BTD) units that terminate meso-to-meso ethyne-bridged (porphinato)zinc (PZn_n) arrays, and 4,7-diethynylbenzo[c][1,2,5]thiadiazole (E-BTD-E) spacers that are integrated into the backbone of these compositions, elucidate new classes of impressive NIR fluorophores. We report the syntheses, electronic structural properties, and emissive characteristics of neoteric PZn-(BTD-PZn)_n, PZn₂-(BTD-PZn₂)_n, and BTD-PZn_n-BTD fluorophores. Absolute fluorescence quantum yield (ϕ_f) measurements, acquired using a calibrated integrating-sphere-based measurement system, demonstrate that these supermolecules display extraordinary ϕ_f values that range from 10–25% in THF solvent, and between 28–36% in toluene solvent over the 700–900 nm window of the NIR. These studies underscore how the regulation of proquinoidal conjugation motifs can be exploited to drive excited-state dynamical properties important for high quantum yield long-wavelength fluorescence emission.

Incorporation of proquinoidal BTD building blocks into conjugated porphyrin oligomers minimizes the extent of excited-state structural relaxation relative to the ground-state conformation, elucidating new classes of impressive NIR fluorophores.     

Geometry of the Fluorides, Oxofluorides, Hydrides, and Methanides of Vanadium(V), Chromium(VI), and Molybdenum(VI): Understanding the Geometry of Non-VSEPR Molecules in Terms of Core Distortion

This paper describes a study of the topology of the electron density and its Laplacian for the molecules VF(5), VMe(5), VH(5), CrF(6), CrMe(6), CrOF(4), MoOF(4), CrO(2)F(2,) CrO(2)F(4)(2)(-) and CrOF(5)(-) all of which, except VF(5,) CrF(6), and CrOF(5)(-) have a non-VSEPR geometry. It is shown that in each case the interaction of the ligands with the metal atom core causes it to distort to a nonspherical shape. In particular, the Laplacian of the electron density reveals the formation of local concentrations of electron density in the outer shell of the core, which have a definite geometrical arrangement such as four in a tetrahedral arrangement or five in a square pyramidal or trigonal bipyramidal and six in an octahedral arrangement. Ligands that are predominately covalently bonded are found opposite regions of charge depletion between these core charge concentrations. In VH(5), VMe(5), CrOF(4), and MoOF(4), these core charge concentrations have a square pyramidal arrangement, and the regions of charge depletions have the corresponding inverse square pyramidal arrangement so that these molecules have a square pyramidal geometry rather than a trigonal prism geometry. In CrMe(6), there are five core charge concentrations with a trigonal bipyramidal arrangement so that the regions of charge depletion have a trigonal prismatic arrangement and the molecule has the corresponding trigonal prism geometry rather than an octahedral geometry. In contrast, molecules in which the only ligand is the more ionically bound fluorine are less affected by core distortion and have VSEPR-predicted structures. The unexpected bond angles in CrO(2)F(2) and the preference of CrO(2)F(4)(2)(-) for a cis structure are also discussed in terms of the pattern of core charge concentrations.