Enhanced fluorescence from arrays of nanoholes in a gold film

Arrays of sub-wavelength holes (nanoholes) in gold films were used as a substrate for enhanced fluorescence spectroscopy. Seven arrays of nanoholes with distinct periodicities (distances between the holes) were fabricated. The arrays were then spin-coated with polystyrene films containing different concentrations of the fluorescent dye oxazine 720. The dye was excited via resonant extraordinary transmission of the laser source through the nanoholes. Enhanced fluorescence was observed when the geometric characteristics of the arrays allowed for an enhancement in the transmitted excitation. This enhancement occurred via surface plasmon excitation by the laser and a consequential increase in the local electromagnetic field in a sub-wavelength region at the metal-film interface. It was demonstrated that the sensitivity of the fluorescence measurement (change in signal vs change in dye concentration in the polymer film) is significantly larger at the surface plasmon resonance conditions than that obtained from equivalent films on glass substrates. Enhancement factors for the fluorescence emission were calculated for each array, with a maximum enhancement of close to 2 orders of magnitude as compared to the emission of films on glass. The results presented here indicate that arrays of nanoholes are interesting substrates for the development of fluorescence sensors based on surface plasmon resonance, as they provide a platform that allows both spatial confinement and enhancement of excitation light. Moreover, the collinear characteristics of the present optical setup, due to the resonant extraordinary transmission through the nanohole arrays, are more conducive to miniaturization and chip integration than more traditional experimental geometries.     

Synthesis of the ABC ring system of manzamine A

A synthesis of the core ABC ring system of the manzamine alkaloids is described, starting from arecoline. The key steps involve a Claisen rearrangement to set up a 4-substituted-3-methylenepiperidine and a stereoselective azomethine ylide dipolar cycloaddition reaction. Condensation of the aldehyde 6 and sarcosine ethyl ester hydrochloride salt gives an intermediate azomethine ylide, which undergoes an intramolecular cycloaddition reaction to set up two new rings and three new chiral centers stereoselectively. The aldehyde 6 was not a suitable substrate for related azomethine ylide cycloaddition reactions with other amines. However, the related dimethyl acetal 26 could be condensed with a variety of amines to give the desired tricyclic products. The cycloaddition reaction with N-methyl or N-allyl glycine ethyl ester gave almost exclusively the exo adduct, whereas cycloaddition with glycine ethyl ester gave the endo adduct.     

Fast determination of 13C NMR chemical shifts using artificial neural networks

Nine different artificial neural networks were trained with the spherically encoded chemical environments of more than 500000 carbon atoms to predict their 13C NMR chemical shifts. Based on these results the PC-program "C_shift" was developed which allows the calculation of the 13C NMR spectra of any proposed molecular structure consisting of the covalently bonded elements C, H, N, O, P, S and the halogens. Results were obtained with a mean deviation as low as 1.8 ppm; this accuracy is equivalent to a determination on the basis of a large database but, in a time as short as known from increment calculations, was demonstrated exemplary using the natural agent epothilone A. The artificial neural networks allow simultaneously a precise and fast prediction of a large number of 13C NMR spectra, as needed for high throughput NMR and screening of a substance or spectra libraries.     

Reactions of dimethyldivinylsilane,dimethyldivinyltin and allyltrimethyltin with diethylene (tertiary) phosphine)platinum complexes

The compounds [Pt(C₂H₄)₂(PR₃)] [PR₃ = P-tBu₂Me, P(C₆H₁₁)₃, PPh₃] react dimethyldivinylsilane or dimethyldivinyltin to give chelate complexes [Pt{(CH₂CH)₂MMe₂} (PR₃)] (M = Si or Sn). allyltrimethyltin reacts with various diethylene (tertiary phosphine)platinum compounds with cleavage of the allyl group to afford complexes [Pt(SnMe₃)(η³-C₃H₅)(PR₂)]. The NMR spectra (¹³C, ¹H and ³¹P) of the new compounds have been recorded, and the data are discussed in terms of the structures proposed.     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Mono-cyclopentadienyl complexes of lanthanum: synthesis and characterization of anilido derivatives

Use of the bulky cyclopentadienyl ligand [η⁵-C₅H₂(SiMe₃)₃-1,2,4]⁻ (Cp?) allows for the isolation of monomeric, mono-ring lanthanide species. As previously reported, (Cp?)K reacts with LaI₃(THF)₄ (THF=tetrahydrofuran) in THF/pyridine to form the mono-ring complex (Cp?)LaI₂(py)₃ (1) (py=pyridine); a minor product of this reaction is the bis-ring species (Cp?)₂LaI(py) (2). The solid state structure of 2 reveals a monomeric compound containing a pseudo-tetrahedral metal center exhibiting no unusual intramolecular contacts. Addition of one equiv of KNHAr (Ar=2,6-ⁱPr₂C₆H₃) to complex 1 in THF generates the mono-anilido compound (Cp?)LaI(NHAr)(THF)₂ (3), which may be converted to the more stable pyridine adduct (Cp?)LaI(NHAr)(py)₂ (4) by the addition of pyridine to 3. An X-ray crystal structure of 3 indicated a trigonal bipyramidal metal center with the anilido group oriented trans to the iodide atom (N1-La1-I1=123.1(3)°). A structural study on the bis-pyridine adduct 4 revealed a similar C_s-symmetric structure with a slightly increased N_anilido-La-I angle of 132.1(2)°. Addition of KNHAr to the di-iodo bipyridine adduct (Cp?)LaI₂(bipy)(py) (5), in which the two iodide atoms are cis-disposed, yields the mono-anilido complex (Cp?)LaI(NHAr)(bipy)(py) (6) (bipy=2,2^′-bipyridine); this compound may also be prepared by the addition of bipy to (Cp?)LaI(NHAr)(py)₂ (4). An X-ray diffraction study shows that the lanthanum center in 6 is octahedrally coordinated by a Cp? ring, an iodide, an anilido group, a pyridine molecule and two nitrogens of a bipy molecule. In this case, the anilido moiety and the iodide ligand are arranged in a cis fashion (N_anilido-La-I=111.2(2)°), resulting in a complex with C₁ symmetry. Both (Cp?)LaI(NHAr)(py)₂ (4) and (Cp?)LaI(NHAr)(bipy)(py) (6) are inactive as catalysts for the hydroamination/cyclization of 2-amino-hex-5-ene.     

The oscillation frequency of a quartz resonator in contact with liquid

A simple relationship is derived which expresses the change in oscillation frequency of a quartz crystal in contact with a fluid in terms of material parameters of the fluid and the quartz. The relationship is Δf = ?f^{$\text{3}\text{2}$}₀(η_L?_L/πμ_Q?_Q)^{$\text{1}\text{2}$}, where f₀ is the oscillation frequency of the free (dry) crystal, η_L and ?_L are the absolute viscosity and density of the liquid, respectively, and μ_Q and ?_Q are the elastic modulus and density of the quartz. This relation is obtained from a simple physical model which couples the shear wave in the quartz to a damped shear wave in the fluid. Quantitative comparisons with two test cases, aqueous solutions of glucose and ethanol at various concentrations, demonstrate the accuracy of this model.     

Magnetically recoverable chiral catalysts immobilized on magnetite nanoparticles for asymmetric hydrogenation of aromatic ketones

Novel heterogenized asymmetric catalysts were synthesized by immobilizing preformed Ru catalysts on magnetite nanoparticles via the phosphonate functionality and were characterized by a variety of techniques, including TEM, magnetization, and XRD. These nanoparticle-supported chiral catalysts were used for enantioselective heterogeneous asymmetric hydrogenation of aromatic ketones with very high enantiomeric excess values of up to 98.0%. The immobilized catalysts were easily recycled by magnetic decantation and reused for up to 14 times without loss of activity and enantioselectivity. Orthogonal nature of the present catalyst immobilization approach should allow the design of other superparamagnetic nanoparticle-supported asymmetric catalysts for a wide range of organic transformations.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.