High-Spin Polyphenoxyls Attached to Star-Shaped Poly(phenylenevinylene)s

Star-shaped poly(1,2-phenylenevinylene)s 4-substituted with multiple pendant phenoxyls (2 and 3) were synthesized by polymerizing 2-bromo-4-(acetoxyphenyl)styrene in the presence of 1,3,5-triiodobenzene or 1,3,5-tris(3',5'-diiodophenyl)benzene as the core via a simple one-pot Heck reaction and subsequent hydrolysis, phenolate formation, and heterogeneous oxidation. ESR spectra indicated a delocalized spin distribution into the core parts of the star-shaped molecules. The polyradicals, 2 and 3, were in a high-spin state at low temperature, and the ferromagnetic behavior was enhanced for the polyradical with a higher molecular weight. Although an average S of 3 remained at 3/2 to 4/2, the polyradical 2 even with a spin concentration of 0.8 spin/unit revealed an average S of 7/2 to 8/2. The 1,3,5-benzene core acted as an effective magnetic coupler to align the spins of the pendant phenoxyls through the star-shaped pi-conjugated backbone.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Asymmetric synthesis of 3,4-dihydroxyglutamic acids via enantioselective reduction of cyclic meso-imide

Stereoselective synthesis of (3S,4S)- and (3R,4R)-series of 3,4-dihydroxyglutamic acids was investigated. The key reaction in this synthesis is asymmetric reduction of meso-imide derived from meso-tartaric acid. Lewis acid-promoted cyanation of the obtained optically active lactam via the acyliminium intermediate followed by standard deprotection procedure afforded the desired 3,4-dihydroxyglutamic acids.     

Temperature stabilized optical waveguide modulator

A low drive-voltage optical modulator using a Ti-diffused UNbO₃ optical waveguide has been fabricated. Stabilization against ambient temperature change was realized by using a miniature halfwave plate. The halfwave voltage, 3 dB bandwidth, optical insertion loss and extinction ratio were 3·8 V (at 1·06m wavelength), 850 MHz, 10 dB and 13 dB, respectively. A reduction scheme for the optical absorption caused by metallic electrodes, and an analysis of the modulator high frequency response are also reported.     

Determination of methylated arginines by column-switching high-performance liquid chromatography-fluorescence detection

A column-switching high-performance liquid chromatography (HPLC)-fluorescence detection method for the determination of three methylated arginines, N(G)-monomethyl-L-arginine (L-NMMA), N(G),N(G)-dimethyl-L-arginine (asymmetric dimethyl-L-arginine, ADMA), and N(G),N(G)'-dimethyl-L-arginine (symmetric dimethyl-L-arginine, SDMA), which are endogenous nitric oxide synthase inhibitors, was developed. After fluorescence derivatization of plasma samples with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), the samples were injected into the HPLC system. The NBD-derivatized methylated arginines were trapped on a cation exchange column with filter to remove proteins, separated within 42 min on a reversed-phase column, and detected at an emission wavelength of 530 nm with excitation at 470 nm. The detection limits were 10 fmol for L-NMMA and 20 fmol for ADMA and SDMA with a signal-to-noise ratio of 3. A good linearity for calibration curves for each methylated arginine was observed within the range of 50-5000 fmol using homoarginine as an internal standard. The proposed method was applied to the quantitative determination of L-NMMA, ADMA and SDMA in rat plasma. The concentrations of L-NMMA, ADMA and SDMA in rat plasma were 0.16 +/- 0.01, 0.73 +/- 0.02 and 0.41 +/- 0.05 micromol l(-1), respectively (n= 5).     

Polymerization of coordinated monomers VII. A kinetic study on the alternating copolymerization of methyl methacrylate with styrene using stannic chloride

The alternating copolymerization of methyl methacrylate with styrene in the presence of stannic chloride at ?50°C in toluene was kinetically investigated both under photoirradiation and with the tri-n-butylboron-benzoyl peroxide initiator. The concentrations of the binary and ternary molecular complexes in the copolymerization solution were estimated by use of the equilibrium constants. The rates are found to be proportional to the 1.5th and 1.0th orders of the concentration of the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The conversion increases proportionally with the polymerization time, while the degree of polymerization is constant irrespective of the time. The rates depend linearly upon the square root of the intensity of the incident light and upon the concentration of tri-n-butylboron, respectively. The alternating copolymerization is confirmed experimentally to precede the homopolymerization of the monomer charged in large excess both under photoirradiation and with initiator. The kinetic results indicate consistently that the alternating copolymerization proceeds through the homopolymerization of the ternary molecular complex in the steady state with a bimolecular termination. Both the conventional radical mechanism and the double complex mechanism are unsuitable for the present alternating copolymerization.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Simultaneous accumulation of both skeletal and appendage-based diversities on tandem Ugi/Diels-Alder products

Diversity-oriented organic synthesis (DOS) is a key concept for construction of skeletally diverse small molecule libraries to discover drug-like small molecules. Here, we describe a DOS class to transform a complex 7-oxanorbornene skeleton, which is readily accessible by a tandem Ugi/Diels-Alder reaction, into two heterotricycle skeletons selectively by using tandem ROM/CM/RCM reaction. In the present study, the mode of cyclization is pre-encoded by building blocks used in the complexity-generating tandem Ugi/Diels-Alder reaction. Since variable alkenes can be used in the CM reaction, our approach can be extended to construct both skeleton- and appendage-diverse small molecule libraries.     

Solvent extraction and spectrophotometric determination of iron(II) with 2,2′-dipyridyl-2-furancarbothiohydrazone

2,2′-Dipyridyl-2-furancarbothiohydrazone (DPFTH) was used for the spectrophotometric determination of trace amount of iron(II) after the extraction process. Iron(II) can be quantitatively extracted with DPFTH in benzene from aqueous solution buffered to 3.0–8.0. The extracted species has absorption maxima at 440, 477, and 738 nm and obeyed Beer's law over the range 0–40 μg of iron in 10 ml at 738 nm. The molar absorptivity at this wave length is 1.17 × 10⁴ liters mole^?1 cm^?1. The proposed method is relatively selective for iron(II) and is satisfactorily applied to the determination of the total iron in natural waters. The proton dissociation constants of the ligand determined spectrophotometrically were pK_a1 = 2.88 and pK_a1 = 6.70 at 25 °C and μ = 0.1.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.