SELF-SIMILAR CRACK EXPANSION METHOD FOR THE STRESS INTENSITY FACTOR ANALYSIS

The Self-Similar Crack Expansion (SSCE) method is proposed to evaluate stress intensi-ty factors at crack tips, whereby stress intensity factors of a crack can be determined by the crackopening displacement over the crack, not just by the local displacement around the crack tip. The crackexpansion rate is estimated by taking advantage of the crack self-similarity. Therefore, the accuracy ofthe calculation is improved. The singular integrals on crack tip elements are also analyzed and are pre-cisely evaluated in terms of a special integral analysis. Combination of these two techniques greatly in-creases the accuracy in estimating the stress distribution around the crack tip. A variety of two-dimen-sional cracks, such as subsurface cracks, edge cracks, and their interactions are calculated in terms ofthe self-similar expansion rate. Solutions are satisfied with errors less than 0.5% as compared with theanalytical solutions. Based on the calculations of the crack interactions, a theory for crack interactionsis proposed such that for a group of aligned cracks the summation of the square of SIFs at the right tipsof cracks is always equal to that at the left tips of cracks. This theory was proved by the mehtod ofSelf-Similar Crack Expansion in this paper.     

非导电型各向同性手性介质中非线性旋光的宏观理论

采用经典电磁场理论描述非导电型各向同性手性介质,研究了圆偏振抽运光作用下线偏振信号光的非线性旋光现象．给出了非线性旋光角的解析表达式．用该公式计算的结果与实验结果一致. 关键词：     

Thermal radical initiator derivatives based on O‐imino‐isourea: Synthesis,polymerization, and characterization

The new thermal radical initiators (TRIs) with linear and cyclic type groups based on derivatives of O‐imino‐isourea have been designed and synthesized. The radical polymerization property of the synthesized TRI derivatives as a radical initiator in n‐butyl acrylate was monitored by differential scanning calorimetry analysis. TRI derivatives with linear type groups, such as 3‐PenDCC, 3‐HexDCC, and 4‐HepDCC, showed peak temperatures (T_peak) of 80–84 °C, whereas those with cyclic type groups, such as C‐PenDCC, C‐HexDCC, and C‐HepDCC, exhibited a wide T_peak distribution in the 74–87 °C range. The polymerization efficiency using new TRIs in n‐butyl acrylate was elaborately identified from the molecular weights and conversion obtained using gel permeation chromatography analysis and NMR spectroscopy. To consider their possible application to automotive clearcoats, the real‐time evolution of the rheological properties of clearcoat resins during the crosslinking process with newly synthesized TRI derivatives was measured, confirming the different crosslinking kinetics of TRI derivatives in real thermal curing process. The results were found to be well correlated with data from the radical polymerization experiments of TRIs. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3593–3600.     

Film characteristics of anodic oxidized AZ91D magnesium alloy by applied power

This study examined the film characteristics of an anodized AZ91D magnesium alloy by varying the direct current and pulse frequency conditions. In order to evaluate the effect of the pulse frequency on film formation, anodic oxidation was carried out by applying direct current and pulse current at a current density of 300 mA/cm². Compared with the sample groups treated with the direct current, a large number of small arcs were generated continuously on the film treated with the pulse current and the film formation rate was found to increase. Homogeneous and compact pores were formed with increasing frequency, and the rate of formation was increased rapidly to the arrival voltage. The film thickness increased and the surface roughness decreased with increasing anodic oxidation time at a fixed frequency of 125 Hz. However, treatment for more than 3 min led to decomposition of the oxidized film onto the previously formed film, which caused an increase in the number of cracks and pores within the film. The most uniform and smallest pores were acquired when the surface was anodized for 3 min at a current density and frequency of 300 mA/cm² and 125 Hz, respectively. X‐ray diffraction revealed the formation of MgO and Mg₂SiO₄ peaks, with a relative decrease in peak intensity for the MgO and Mg substrate. The Vickers hardness value was higher on the treated groups than on the untreated group, and the potentiodynamic polarization test revealed satisfactory corrosion resistance through a decrease in corrosion density and a large improvement in the corrosion potential. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of intramolecular energy transfer on the rate of unimolecular isomerization: HCN --HNC

This paper reports calculations of the rate of isomerization of HCN - HCN based on the theory of Gary and Rice as extended by Zhao and Rice. The major task is to determine the effect of intramolecular energy transfer on the prediction of the rate of isomerization. Both the full three-dimensional (3D) system and the reduced two-dimensional (2D) system obtained from freezing CN bond at 1.159 A are analyzed to check the validity of the freezing bond approximation. Meanwhile, RRKM rates are calculated to test RRKM choice of the transition state by comparing to Gary-Rice three-state model. The comparison shows that the rates from 2D model and 3D model are differing up to 20% with 2D rates consistently larger. The intramolecular energy transfer modifies the isomerization rate for HCN system up to 30% that is modestly small by the expectation. The isomerization rate predicted from RRKM theory is greater than those of Gary-Rice three-state model theory up to 65%, and it overstimates the rates under all consider