Tuning of fluorescence properties of aminoterpyridine fluorophores by N-substitution

Several N-alkyl and N-phenyl derivatives of 6-amino- () and 6,6'-diamino-2,2':6',2'-terpyridine () were synthesized, and their fluorescence properties were studied. A successive red-shift was observed as the number of the N-substituted groups increased. It was also shown that the susceptivity of the fluorophores to a solvent varied considerably according to the mode of the N-substitution. While the monoamino-tpys (tpy: 2,2':6',2'-terpyridine) suffered almost complete quenching of their fluorescence in ethanol, the fully N-alkylated diamino-tpys and retained their fluorescence. The results show that N-substitution is a useful way to tune both the radiation energy and solvent susceptivity of the fluorescence of the amino-tpys.     

Reversible transformation of ZnII coordination geometry in a single crystal of porous metal-organic framework [Zn3(ntb)2(EtOH)2].4 EtOH

A 3D porous metal-organic framework [Zn3(ntb)2(EtOH)2]n.4nEtOH (1) that generates 1D channels of honeycomb aperture has been prepared by the solvothermal reaction of Zn(NO3)(2).6 H2O and 4,4',4'-nitrilotrisbenzoic acid (H3NTB) in EtOH at 110 degrees C. Framework 1 exhibits reversible single-crystal-to-single-crystal transformations upon removal and rebinding of the coordinating EtOH as well as the EtOH guest molecules, which give rise to desolvated crystal [Zn3(ntb)2]n (1') and resolvated crystal [Zn3(ntb)2-(EtOH)2]n.4nEtOH (1'). The X-ray structures indicate that 3D host framework is retained during the transformations from 1 to 1' and from 1' to 1', but the coordination geometry of ZnII ions changes from/to trigonal bipyramid to/from tetrahedron, concomitant with the rotational rearrangement of a carboxylate plane of the NTB3- relative to its associated phenyl ring. To retain the single crystal integrity, extensive cooperative motions must exist between the molecular components throughout the crystal. Framework 1' exhibits permanent porosity, thermal stability up to 400 degrees C, and blue luminescence, and high storage capabilities for N2, H2, CO2, and CH4.     

Development of a peptide inhibitor-based cantilever sensor assay for cyclic adenosine monophosphate-dependent protein kinase

A highly sensitive nanomechanical cantilever sensor assay based on an electrical measurement has been developed for detecting activated cyclic adenosine monophosphate (cyclic AMP)-dependent protein kinase (PKA). Employing a peptide derived from the heat-stable protein kinase inhibitor (PKI), a magnetic bead system was first selected as a vehicle to immobilize the PKI-(5-24) peptide for capturing PKA catalytic subunit and the activity assay was applied for indirectly assessing the binding. Synergistic interactions of adenosine triphosphate (ATP) and the peptide inhibitor with the kinase were then investigated by a solution phase capillary electrophoretic assay, and by surface plasmon resonance technology which involved immobilization of the peptide inhibitor. After systemically evaluated by a homogeneous direct binding assay, the ATP-dependent recognition of the catalytic subunit of PKA by PKI-(5-24) was successfully transferred on to the nanomechanical cantilevers at protein concentrations of 6.6 pM-66 nM, exhibiting much higher sensitivity and wider dynamic range than the conventional activity assay. Thus, direct assessment of activated kinases using the cantilever sensor system functionalized with specific peptide inhibitors holds great promise in analytical applications and clinical medicine.     

A facile synthesis of 1‐alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines

1‐Alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines were synthesized by the alkylation of 1‐alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines with arylalkyl halide in the presence of potassium carbonate. 1‐Alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines as key precursor prepared from o‐vaniline via 6 steps.     

Synthetic 6-O-methylglucose-containing polysaccharides (sMGPs): design and synthesis

With the hope of mimicking the chemical and biological properties of natural 6-O-methyl-D-glucose-containing polysaccharides (MGPs), synthetic 6-O-methyl-D-glucose-containing polysaccharides (sMGPs) were designed and synthesized from alpha-, beta-, and gamma-cyclodextrins (CDs). The synthetic route proved to be flexible and general, to furnish a series of sMGPs ranging from 6-mer to 20-mer. A practical and scalable method was discovered selectively to cleave the CD derivatives and furnish the linear precursors to the glycosyl donors and acceptors. The Mukaiyama glycosidation was adopted to couple the glycosyl donors with the glycosyl acceptors. Unlike in the 3-O-methyl-D-mannose-containing polysaccharide (sMMP) series, the amount of the Mukaiyama acid required in the sMGP series increased with an increase of substrate size; that is, for large oligomers, more than one equivalent of the acid was required.     

Anthraquinones, Cdc25B phosphatase inhibitors, isolated from the roots of Polygonum multiflorum Thunb

Three anthraquinones, Cdc25B phosphatase inhibitors, were isolated from the methanolic extract of the roots of Polygonum multiflorum Thunb. (Polygonaceae). Anthraquinones, physcion (1), emodin (2), and questin (3), inhibited the enzymatic activity of Cdc25B phosphatase with IC(50) values of 62.5, 30, and 34 microg mL(-1), respectively. Emodin (2) and questin (3) strongly inhibited the growth of human colon cancer cells, SW620 with GI(50) values of 6.1 and 0.9 microg mL(-1), respectively. Commercially available anthraquinones, chrysophanol (4), and rhein (5) also inhibited Cdc25B phosphatase with IC(50) values of 10.7 and 22.1 microg mL(-1), respectively.     

Plasma-Induced Oxidation Products of (–)-Epigallocatechin Gallate with Digestive Enzymes Inhibitory Effects

(−)-Epigallocatechin gallate (EGCG), the chief dietary constituent in green tea (Camellia sinensis), is relatively unstable under oxidative conditions. This study evaluated the use of non-thermal dielectric barrier discharge (DBD) plasma to improve the anti-digestive enzyme capacities of EGCG oxidation products. Pure EGCG was dissolved in an aqueous solution and irradiated with DBD plasma for 20, 40, and 60 min. The reactant, irradiated for 60 min, exhibited improved inhibitory properties against α-glucosidase and α-amylase compared with the parent EGCG. The chemical structures of these oxidation products 1–3 from the EGCG, irradiated with the plasma for 60 min, were characterized using spectroscopic methods. Among the oxidation products, EGCG quinone dimer A (1) showed the most potent inhibitory effects toward α-glucosidase and α-amylase with IC₅₀ values of 15.9 ± 0.3 and 18.7 ± 0.3 μM, respectively. These values were significantly higher than that of the positive control, acarbose. Compound 1, which was the most active, was the most abundant in the plasma-irradiated reactant for 60 min according to quantitative high-performance liquid chromatography analysis. These results suggest that the increased biological capacity of EGCG can be attributed to the structural changes to EGCG in H₂O, induced by cold plasma irradiation.     

Phase‐transition characteristics of amphiphilic poly(2‐ethyl‐2‐oxazoline)/poly(ε‐caprolactone) block copolymers in aqueous solutions

Amphiphilic diblock and triblock copolymers of various block compositions based on hydrophilic poly(2‐ethyl‐2‐oxazoline) (PEtOz) and hydrophobic poly(ε‐caprolactone) were synthesized. The micelle formation of these block copolymers in aqueous media was confirmed by a fluorescence technique and dynamic light scattering. The critical micelle concentrations ranged from 35.5 to 4.6 mg/L for diblock copolymers and 4.7 to 9.0 mg/L for triblock copolymers, depending on the block composition. The phase‐transition behaviors of the block copolymers in concentrated aqueous solutions were investigated. When the temperature was increased, aqueous solutions of diblock and triblock copolymers exhibited gel–sol transition and precipitation, both of which were thermally reversible. The gel–sol transition‐ and precipitation temperatures were manipulated by adjustment of the block composition. As the hydrophobic portion of block copolymers became higher, a larger gel region was generated. In the presence of sodium chloride, the phase transitions were shifted to a lower temperature level. Sodium thiocyanate displaced the gel region and precipitation temperatures to a higher temperature level. The low molecular weight saccharides, such as glucose and maltose, contributed to the shift of phase‐transition temperatures to a lower temperature level, where glucose was more effective than maltose in lowering the gel–sol transition temperatures. The malonic acid that formed hydrogen bonds with the PEtOz shell of micelles was effective in lowering phase‐transition temperatures to 1.0M, above which concentration the block copolymer solutions formed complex precipitates. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2400–2408, 2000     

SIM(2)-invariant modifications of electrodynamic theory

In the Cohen–Glashow Very Special Relativity we exhibit possible modifications to the Maxwell theory and to the quantum electrodynamics Lagrangian in some generality, and discuss characteristic features depending on the modifications. Modified gauge transformations in SIM(2)-invariant theories are introduced and the related gauge fields, with two polarization states, can have nonzero mass. Also considered are SIM(2)-covariant modifications to the Proca-type field equations for a massive spin-1 particle.