Nuclear magnetic resonance of brute force oriented110mAgAg

NMR on brute force oriented nuclei (NMRON/BF) has been observed for^110mAg in elemental silver. Resonances have been measured at approximately 7 T and 8 T with the resulting gradient of 4.583(5) MHzT⁻¹ which produces a value for the^110mAg moment of μ=3.589(4) nm (uncorrected). Factors pertinent to successful NMRON/BF in systems such as^110mAgAg, with a complex decay scheme and modestg-factor, are also discussed.     

Crystallization and ordering of complex oxide structures. I. “Splat-cooled” Nb2O5TiO2

“Splat-cooled” Nb₂O₅TiO₂ with a melt composition corresponding to TiNb₃₈O₉₇ has been examined by high-resolution electron microscopy and electron diffraction. Previous X-ray work showed this material to be crystalline, despite a cooling rate of about 10⁵ °C sec^?1. The present study reveals a variety of structures ranging from highly ordered block structures to severely disordered regions of uncertain structure and composition. “Double layer” structures are identified, and subtle contrast variations in their crystals are explained in terms of single jogs of overlap structures. Crystallization processes are discussed in the light of these results.     

Electron spin relaxation time measurements using radiofrequency longitudinally detected ESR and application in oximetry

Longitudinally detected ESR (LODESR) involves transverse ESR irradiation with a modulated source and observing oscillations in the spin magnetization parallel to the main magnetic field. In this study, radiofrequency-LODESR was used for oximetry by measuring the relaxation times of the electron. T1e and T2e were measured by investigating LODESR signal magnitude as a function of detection frequency. We have also predicted theoretically and verified experimentally the LODESR signal phase dependence on detection frequency and relaxation times. These methods are valid even for inhomogeneous lines provided that T1e>T2e. We have also developed a new method for measuring T1e, valid for inhomogeneous spectra, for all values of T1e and T2e, based on measuring the spectral area as a function of detection frequency. We have measured T1e and T2e for lithium phthalocyanine crystals, for the nitroxide TEMPOL, and for the single line agent Triarylmethyl (TAM). Furthermore, we have collected spectra from aqueous solutions of TEMPOL and TAM at different oxygen concentrations and confirmed that T1e values are reduced with increased oxygen concentration. We have also measured the spin-lattice electronic relaxation time for degassed aqueous solutions of the same agents at different agent concentrations. T1e decreases as a function of concentration for TAM while it remains independent of free radical concentration for TEMPOL, a major advantage for oxygen mapping. This method, combined with the ability of LODESR to provide images of exogenous free radicals in vivo, presents an attractive alternative to the conventional transverse ESR linewidth based oximetry methods.     

Modulation of Prins Cyclization by Vibrational Strong Coupling

Light-molecule strong coupling has emerged within the last decade as a new method to control chemical reactions. A few years ago it was discovered that chemical reactivity could be altered by vibrational strong coupling (VSC). Only a limited number of reactions have been investigated under VSC to date, including solvolysis and deprotection reactions. Here the effect of VSC on a series of aldehydes and ketones undergoing Prins cyclization, an important synthetic step in pharmaceutical chemistry, is investigated. A decrease of the second-order rate constant with VSC of the reactant carbonyl stretching groups is observed. We also observe an increased activation energy due to VSC, but proportional changes in activation enthalpy and entropy, suggesting no substantive change in reaction pathway. The addition of common cycloaddition reactions to the stable of VSC-modified chemical reactions is another step towards establishing VSC as a genuine tool for synthetic chemistry.     

Rapid determination of 210Po in water samples

A new rapid method for the determination of ²¹⁰Po in water samples has been developed at the Savannah River National Laboratory (SRNL) that can be used for emergency response or routine water analyses. If a radiological dispersive device event or a radiological attack associated with drinking water supplies occurs, there will be an urgent need for rapid analyses of water samples, including drinking water, ground water and other water effluents. Current analytical methods for the assay of ²¹⁰Po in water samples have typically involved spontaneous auto-deposition of ²¹⁰Po onto silver or other metal disks followed by counting by alpha spectrometry. The auto-deposition times range from 90 min to 24 h or more, at times with yields that may be less than desirable. If sample interferences are present, decreased yields and degraded alpha spectrums can occur due to unpredictable thickening in the deposited layer. Separation methods have focused on the use of Sr Resin?, often in combination with ²¹⁰Pb analysis. A new rapid method for ²¹⁰Po in water samples has been developed at the SRNL that utilizes a rapid calcium phosphate co-precipitation method, separation using DGA Resin^® (N,N,N′,N′ tetraoctyldiglycolamide extractant-coated resin, Eichrom Technologies or Triskem-International), followed by rapid microprecipitation of ²¹⁰Po using bismuth phosphate for counting by alpha spectrometry. This new method can be performed quickly with excellent removal of interferences, high chemical yields and very good alpha peak resolution, eliminating any potential problems with the alpha source preparation for emergency or routine samples. A rapid sequential separation method to separate ²¹⁰Po and actinide isotopes was also developed. This new approach, rapid separation with DGA resin plus microprecipitation for alpha source preparation, is a significant advance in radiochemistry for the rapid determination of ²¹⁰Po.     

Rapid fusion method for determination of actinides in fecal samples

A new rapid fusion method for the determination of actinides in fecal samples has been developed at the Savannah River National Laboratory that can be used for emergency response or routine bioassay analyses. If a radiological dispersive device, improvised nuclear device or nuclear accident occur, there will be an urgent need for rapid analyses of environmental, food and bioassay matrices. If an inhalation event occurs and there is confirmed radionuclide activity present via urine analyses of individuals, fecal analyses will typically be required to determine the soluble/insoluble fraction of actinides present as a result of the event to allow a more reliable estimate of radiological dose. The new method for actinides in fecal samples uses accelerated furnace heating, a rapid sodium hydroxide fusion method, a lanthanum fluoride matrix removal step, and a column separation process with stacked TEVA, TRU and DGA resin cartridges. The rapid fusion method provides rugged digestion of any refractory particles present, essential for reliable analysis of actinides in fecal samples. Alpha spectrometry was used to determine the actinide isotopes, but this method can be adapted for assay by inductively-coupled plasma mass spectrometry for actinide isotopes with longer half-lives that have sufficient mass to allow measurement. The method showed high chemical recoveries and effective removal of interferences. The determination of actinides in fecal samples can be performed in less than 12 h in an emergency with excellent quality for emergency samples. The new method, which is much less tedious and time-consuming than other reported methods, can be used for emergency or routine fecal sample analyses. This enables more timely estimates of radiological dose to be performed that utilize soluble/insoluble actinide ratios.     

Synthesis of the C21-C34 fragment of antascomicin B

The C21-C34 fragment of the potent FKBP12-binding macrolide antascomicin B was prepared using Ireland-Claisen and allylic diazene rearrangements to establish the C26/C27 and the C23 stereocenters, respectively. Directed hydrogenation installed the C29 β-configuration. The fragment possesses 7 of the 11 fixed stereocenters contained in the natural product.