A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering

A thermal model of the interaction of pulsed near-infrared laser radiation from a Nd:YAG laser was made, taking the measured powder properties such as reflectance, optical penetration depth and thermal conductivity into account. It allows an estimation of the evolution of two different temperatures: the average temperature of the powder (taken over the grains in a volume given by the laser beam diameter and the optical penetration depth) and the temperature distinction within a single grain. It showed that in pulsed mode consolidation can be achieved at much lower average power as the surface of the powder particles are molten but their cores remain at nearly room temperature. This leads to a much lower average temperature and therefore a dramatic decrease in residual thermal stresses in the finished piece. The results of the model were experimentally tested and confirmed. Received: 26 July 2001 / Accepted: 23 November 2001 / Published online: 23 January 2002     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

Corrected mirror systems with double reflection

We propose objectives consisting of two mirrors with central holes for passage of a light beam. The optical layout ensures multiple reflection of rays from both mirrors. We consider several approaches to calculating the design parameters for which three and four aberrations do not occur. The objectives can be used in optical devices operating in the UV and IR regions of the spectrum. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 267–270, March–April, 2007.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Spectral Properties of Thioflavin T and Its Complexes with Amyloid Fibrils

Comparative analysis of the absorption and fluorescence spectra and fluorescence excitation spectra of thioflavin T (ThT) in various solvents and in the composition of amyloid fibrils has shown that ThT, when excited in the region of the long-wavelength absorption band, fluoresces in the spectral region with a maximum at 478–484 nm. The appearance in aqueous and alcohol solutions of a fluorescence band with a maximum near 440 nm has been attributed to the presence in the composition of the ThT preparations of an impurity with an absorption band in the 340–350-nm range. The literature data showing that in glycerol ThT has a wide fluorescence spectrum with two maxima are due to the artifact connected with the use of a high concentration of the dye. It has been suggested that the cause of the low quantum yield of ThT aqueous and alcohol solutions is the breakage of the system of conjugated bonds due to the reorientation of the benzothiozole and benzaminic rings of ThT in the excited state with respect to one another. The main factor determining the high quantum yield of fluorescence of ThT incorporated in fibrils is the steric restriction of the rotation of the rings about one another under these conditions. The suggestions made have been verified by the quantum-chemical calculation of the ThT molecule geometry in the ground and excited states.     

Pairwise Correlations in a Multicomponent Anisotropic Liquid

We investigate a multicomponent anisotropic liquid system. The first spatial moment of the direct correlation function is taken into account to obtain asymptotic expressions for the pairwise correlation functions. In this approximation, we obtain the pairwise correlation functions that describe the system behavior not only in the critical-state neighborhood but also in the noncritical domain. We show that the critical parameters for the anisotropic system differ from those for the isotropic system.     

Algorithmic Complexity of a Problem of Idempotent Convex Geometry

Properties of the idempotently convex hull of a two-point set in a free semimodule over the idempotent semiring R _{max min} and in a free semimodule over a linearly ordered idempotent semifield are studied. Construction algorithms for this hull are proposed.     

HfO2/AlGaN/GaN structures with HfO2 deposited at ultra low pressure using an e‐beam

We show that HfO₂/AlGaN/GaN structures with HfO₂ layer deposited using an e‐beam in ultra high vacuum are suitable for field effect transistors. The dielectric constant of the HfO₂ was found ε_HfO > 23–24, which is close to the highest re‐ ported values for this material. The leakage current did not exceed 10^–4 A/cm² at the threshold voltage. The comparison of the losses in the samples with and without HfO₂ indicates low concentration of the interface traps. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)