利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

An interior trust region algorithm for solving linearly constrained nonlinear optimization

In this paper, an interior point algorithm based on trust region techniques is proposed for solving nonlinear optimization problems with linear equality constraints and nonnegative variables. Unlike those existing interior-point trust region methods, this proposed method does not require that a general quadratic subproblem with a trust region bound be solved at each iteration. Instead, a system of linear equations is solved to get a search direction, and then a linesearch of Armijo type is performed in this direction to obtain a new iteration point. From a computational point of view, this approach may in general reduce a computational effort, and thus improve the computational efficiency. Under suitable conditions, it is proven that any accumulation of the sequence generated by the algorithm satisfies the first-order optimality condition.     

基于反向传播神经网络的阻抗断层图像重建新方法

电阻抗成像是通过对物体表面电压、电流的测量来重建物体内部阻抗分布或变化图像的一种新颖计算机断层成像技术。阻抗断层图像重建是一种病态的、非线性的逆问题。提出了一种全新的阻抗断层图像重建方法，它利用反向传播神经网络来表征物体内部阻抗变化位置与物体表面电压变化大小的非线性映射关系，从而可以根据对物体表面测量电压的变化先准确定位阻抗变化区域，再用线性近似方法重建阻抗变化图像，这种方法不仅具有一定的抗噪能力，而且成像精度和空间分辨率都大大好于逆投影方法。     

描述光伏效应的新解析模型

 对陆启生等人提出的描述光伏效应的解析模型涉及的边界条件进行了讨论，提出了一个适用性更宽的解析模型。通过对新模型、陆的模型以及另一个解析模型的比较，对前两个模型能够描述光伏型光电探测器在强光辐照时的信号饱和效应的原因进行了解释。     

关于具有多项式约束的I-环

In this paper, it is shown that an l-prime lattice-ordered ring in which the square of every element is positive must be a domain provided it has non-zero f-elements and be an l-domain provided it has a left (right) identity ele-ment or a central idempotent element .More generally,the same conclusion follows if the condition a²≥0 is replaced by p(a)≥0 or f(a,b)≥0 for suitable polyno-mials p(x) and f(x, y) . It is also shown that an l-algebra is an f-algebra provided it is archimedean, contains an f-element e>0 with r₁(e)=0, and satifies a polynomial identity p(x)≥0 or f(x,y)≥0 (for suitable f(x,y)).     

双轴晶体Nd^3＋：KGd（WO4）2的非偏振吸收光谱研究

报道了用三个方向相互垂直的非偏振吸收光谱测量计算Ｊｕｄｄ－Ｏｆｅｌｔ参数从而算出双轴晶体Ｎｄ３＋ＫＧｄ（ＷＯ４）２的荧光寿命、荧光分支比和发射截面的方法。得到的荧光寿命为１１９μｓ，平均发射截面为２．３×１０－１９ｃｍ２。     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

离子束引起的在Al／Cr双层薄膜界面处的原子混合

用600keV的Kr~ 离子轰击Al/Cr双层薄膜样品进行界面原子反应及相互混合的研究。实验样品是在单晶硅上蒸镀约500nm厚的铝膜,相继再蒸上所需厚度的铬膜而制成的。轰击剂量为2.0×10~(15)-2.5×10~(16)Kr~ /cm~2。用2.0MeVa粒子对轰击前后的样品进行了卢瑟福背散射(RBS)分析,发现界面处有明显的原子混合存在;当轰击剂量≥1.0×10~(16)Kr~ /cm~2时,RBS谱出现有明显的坪台,经拟合计算和x射线衍射(XRD)测量证实确有化合物Al_(13)Cr_2存在;还分别得到了原子混合量及混合效率与轰击剂量的关系;最后对界面处的原子混合机制进行了讨论。     

Preparation of well-aligned carbon nanotubes by pyrolysis of phenolic resin in anodic alumina pores

Well-aligned carbon nanotubes (CNTs) of high quality were synthesized by pyrolysis of phenolic resin at 800 °C in anodic alumina oxide (AAO) pores under argon protection. The innocuous source materials and safe operational conditions permit this method to synthesize well-aligned CNTs in large-scale and low cost. The formation mechanism of the synthesized CNTs is also proposed in this work by a series of visual sketches and is proved with obvious evidence. Firstly, phenolic resin nanotubes form in the template pores through the evaporation of solvent. Heat treatment then transfers these tubes into CNTs.     

A retractable structure based on Bricard linkages and rotating rings of tetrahedra

Retractable structures which alter their geometries according to practical requirements are widely used in roof structures of stadiums for their versatility. A retractable structure based on threefold-symmetric Bricard linkages and rotating rings of tetrahedra is proposed and developed in this paper. By replacing each link of a threefold-symmetric Bricard linkage with a tetrahedron, a retractable structure is obtained which can repeatedly open and close by rotating the tetrahedra. The geometric relationship between the retractable structure and the threefold-symmetric Bricard linkage is derived and ranges of main geometric parameters are determined to ensure a continuous and smooth movement in the deployment of the structure. Then the relative displacement of the support and the open rate of the structure, two main parameters concerned in practical applications, are investigated. Preferred ranges of main geometric parameters are proposed and a physical model is manufactured to verify them. A discussion on some possible improvements and modifications of the structure is also presented.