The electrochemical behaviors of methylene blue on the surface of nanostructured NiWO4 prepared by coprecipitation method

A simple coprecipitation method was used for preparation of monoclinic nanostructured NiWO₄ from an aqueous solution at a fixed pH and temperature of 7.0 and 80 °C, respectively. The prepared material was characterized by X-ray diffraction, scanning electron microscopy, photoluminescence spectroscopy, and electrochemical measurements. Nano-NiWO₄ was incorporated into a carbon paste electrode and by means of cyclic voltammetry; the electrochemical behavior of methylene blue on the surface of nano-NiWO₄ was investigated. A mechanism on terms of obtained cyclic voltammograms showing one reduction peak and two sequential oxidation peaks was suggested by emphasizing on the stabilizing role of nano-NiWO₄ for semi-methylene blue. A diffusion coefficient of 5.30?×?10^?6 cm²/s was gained for methylene blue.     

Theoretical studies on tautomerism of imidazole-2-selenone

The tautomerism of all possible forms of imidazole selenone (ISe1–ISe6), induced by proton transfer was studied theoretically in different environments including gas phase, continuum solvent, and microhydrated environment with one explicit water molecule. The calculations were performed at the MP2 and CAM-B3LYP levels of theory, separately. It was found that the imidazole selenone, in the form of ISe3, is the most stable isomer in both gas phase and solvent. The activation energy for conversion of ISe3 to imidazole selenol (ISe6), as the second stable form, is 41.72 and 43.0 kcal/mol in the gas phase and water, respectively. The infrared spectral frequencies as well as the vibrational frequency shifts were reported and assigned to their corresponding vibrational modes. In addition, the variation of dipole moments and charges on the atoms with change of solvent was studied. The energies of HOMO, LUMO, and HOMO–LUMO gap were calculated in both gas phase and solvent. Specific solvent effects with addition of water molecule near the electrophilic centers of tautomers and the transition states of proton transfer, assisted by water molecule, were investigated. It was found that the water molecule can form different hydrogen bonds with the molecule. Aggregation of the isomers with water molecule does not change the order of stability of isomers, but proton transfer reaction assisted by a water molecule needs less energy than when the proton shifts through the intramolecular process.     

Effect of axial strain on structural and electronic properties of zig-zag type of boron nitride nanotube (BNNT): a quantum chemical study

The influence of strain on structural and electronic properties of zig-zag type of boron nitride nanotubes (BNNTs) has been studied by density functional theory calculations. The variations of HOMO–LUMO gaps, geometrical parameters, cohesive energy, radial buckling, isodensity surfaces of the HOMOs and LUMOs, electrophilicity index, chemical potential, and chemical hardness and softness have been investigated for BNNTs at different strains. Our results show that the effect of axial strain on the electronic and structural properties of zig-zag BNNTs depends on the diameter as well as the length of the nanotube.     

Synthesis, spectroscopy, electrochemistry and thermal study of vanadyl tridentate Schiff base complexes: theoretical study of the structures of compounds by ab initio calculations

The VO(IV) complexes of tridentate ONN Schiff ligands were synthesized and characterized by IR, UV–Vis and elemental analysis. The electrochemical properties of the vanadyl complexes were investigated by cyclic voltammetry. A good correlation was observed between the oxidation potentials and the electron-withdrawing character of the substituents on the Schiff base ligands, showing the following trend: MeO < H < Br < NO₂. The thermogravimetry (TG) and differential thermoanalysis (DTA) of the VO(IV) complexes were carried out in the range of 20–700 °C. The VOL¹(OH₂) and VOL²(OH₂) decomposed in three steps, whereas the VOL³(OH₂) and VOL⁴(OH₂) complexes decomposed in two steps. The thermal decomposition of these complexes is closely related to the nature of the Schiff base ligands and proceeds via first-order kinetics. The structures of compounds were determined by ab initio calculations. The optimized molecular geometry and atomic charges were calculated using MP2 method with 6-31G(d) basis. The results suggested that, in the complexes, V(IV) ion is in square-pyramid N₂O₃ coordination geometry. Also the bond lengths and angles were studied and compared.     

A mild and green chemistry approach for the synthesis of symmetrical spirooxindole derivatives

A simple and eco-friendly synthesis of the biologically important spirooxindole scaffold was done by the reaction of isatin with activated pyrazolones in the presence of a catalytic amount of p-toluenesulfonic acid in water at room temperature. A variety of symmetrical spirooxindole derivatives were obtained with excellent yields within short reaction time. This method is of great value because of its environmentally benign character, high yield, and easy handling.     

A Rapid and Sensitive LC–MS Method for Determination of Ezetimibe Concentration in Human Plasma: Application to a Bioequivalence Study

A selective and highly sensitive high performance liquid chromatography-electrospray ionization mass spectrometry method has been developed for determination of ezetimibe concentrations in human plasma. Ezetimibe was extracted from plasma with ethyl acetate followed by evaporation of the organic layer and, then, reconstitution of the residue in mobile phase before injection to chromatograph. The mobile phase consisted of acetonitrile-ammonium acetate (10 mM, pH 3.0), 75:25 (v/v). An aliquot of 10 μL was chromatographically analyzed on a prepacked Zorbax XDB-ODS C₁₈ column (2.1 × 100 mm, 3.5 micron). Detection of analytes was achieved by mass spectrometry with atmospheric pressure chemical ionization (APCI) interface in the negative ion mode operated under the multiple-reaction monitoring mode (m/z transition: ezetimibe 408–271). Standard curves were linear (r = 0.998) over the wide ezetimibe concentration range of 0.05–30.0 ng mL⁻¹ with acceptable accuracy and precision. The limit of detection was 0.02 ng mL⁻¹. The validated LC–APCI–MS method has been used successfully throughout a bioequivalence study on an ezetimibe generic product in 24 healthy male volunteers.

     

A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

CuO‐CeO2 Nanocomposite: A Highly Efficient Recyclable Catalyst for the Green Synthesis of 1,8‐Dioxooctahydroxanthenes in Water

CuO‐CeO₂ nanocomposite is reported as a highly efficient and recyclable catalyst for the green synthesis of 1,8‐dioxooctahydroxanthenes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any losing of its efficiency.