New eco-friendly animal bone meal catalysts for preparation of chalcones and aza-michael adducts

ABSTRACT: Two efficient reactions were successfully carried out using Animal Bone Meal (ABM) and potassium fluoride or sodium nitrate doped ABMs as new heterogeneous catalysts under very mild conditions. After preparation and characterization of the catalysts, we first report their use in a simple and convenient synthesis of various chalcones by Claisen-Schmidt condensation and then in an aza-Michael addition involving several synthesized chalcones with aromatic amines. All the reactions were carried out at room temperature in methanol; the chalcone synthesis was also achieved in water environment under microwave irradiation. Doping ABM enhances the rate and yield at each reaction. Catalytic activities are discussed and the ability to re-use the ABM is demonstrated. RESULTS: For Claisen-Schmidt the use of ABM alone, yields never exceeded 17%. In each entry, KF/ABM and NaNO3/ABM (79-97%) gave higher yields than using ABM alone under thermic condition. Also the reaction proceeded under microwave irradiation in good yields (72-94% for KF/ABM and 81-97% for NaNO3/ABM) and high purity. For aza-Michael addition the use of ABM doped with KF or NaNO3 increased the catalytic activity remarkably. The very high yields could be noted (84-95% for KF/ABM and 81-94% for NaNO3/ABM). CONCLUSION: The present method is an efficient and selective procedure for the synthesis of chalcones anaaza-Michael adducts. The ABM and doped ABMs are a new, inexpensive and attractive solid supports which can contribute to the development of catalytic processes and reduced environmental problems.     

SBA-15-SO3H-assisted preparation of 4-aza-phenanthrene-3,10-dione derivatives via a one-pot,four-component reaction

Research on Chemical Intermediates - A novel four-component approach for the synthesis of 1-phenyl-1,4-dihydro-2H-9-oxa-4-aza-phenanthrene-3,10-dione derivatives has been presented via the reaction...     

Adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto fine powder of Typha latifolia L. root: kinetics and isotherm studies

Fine powder of Typha latifolia L. root was used for adsorption of copper and zinc ions from buffered and nonbuffered aqueous solutions. The adsorption reached equilibrium in 60 min. During this time, more than 90 % of the adsorption process was completed. The effect of initial pH, initial concentration of metal ion, and contact time was investigated in a batch system at room temperature. The optimum adsorption performance was observed at pH 5.00 and 4.25 for nonbuffered solutions of Cu(II) and Zn(II), respectively, while for buffered solutions it occurred at pH 6.00. The total metal uptake decreased on application of ammonium acetate buffer, from 37.35 to 17.00 mg g^?1 and 28.80 to 9.90 mg g^?1 for Cu(II) and Zn(II) solutions, respectively, with 100 mg L^?1 initial concentration. The pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models were used to describe the adsorption kinetics. The experimental data followed the pseudo-second-order kinetic model. The biosorption equilibrium was well described by Langmuir and Freundlich isotherm models.     

Development of a PIXE method at high energy with the ARRONAX cyclotron

The high energy PIXE (HEPIXE) method is a multi-elemental non-destructive ion beam analysis technique. It is based on the detection of the X-ray emitted due to the interaction of high energy particle beam with a sample. This technique is fast and allows the analysis of heavy and medium elements in thin (μm), thick (mm) and multilayer samples. At the ARRONAX facility (Nantes, France), the HEPIXE method has been used to determine the composition of natural and synthetic sodalites. Photochromic properties of these samples are supposed to come from the trace elements (concentration in the ppm range) present in the samples. Taking advantage of the 70 MeV proton beam available at our facility, the HEPIXE method has been also used to study multilayer samples. It has been shown that it is possible to determine the composition of each layer, their thicknesses and their depth position by analyzing the recorded X-ray spectra.     

Syntheses of Molybdenum and Tungsten Imido Alkylidene Complexes that Contain a Bidentate Oxo/Thiolato Ligand

3,3′,5,5′-Tetra-tert-butyl-2′-sulfanyl[1,1′-biphenyl]-2-ol (H₂[^tBu₄OS]) was prepared in 24 % yield overall from the analogous biphenol using standard techniques. Addition of H₂[^tBu₄OS] to Mo(NAr)(CHCMe₂Ph)(2,5-dimethylpyrrolide)₂ led to formation of Mo(NAr)(CHCMe₂Ph)[^tBu₄OS], which was trapped with PMe₃ to give Mo(NAr)(CHCMe₂Ph)[^tBu₄OS](PMe₃) ( 1 (PMe₃)). An X-ray crystallographic study of 1 (PMe₃) revealed that two structurally distinct square pyramidal molecules are present in which the alkylidene ligand occupies the apical position in each. Both 1 (PMe₃)_A and 1 (PMe₃)_B are disordered. Mo(NAd)(CHCMe₂Ph)(^tBu₄OS)(PMe₃) ( 2 (PMe₃); Ad=1-adamantyl) and W(NAr)(CHCMe₂Ph)(^tBu₄OS)(PMe₃) ( 3 (PMe₃)) were prepared using analogous approaches. 1 (PMe₃) reacts with ethylene (1 atm) in benzene within 45 minutes to give an ethylene complex Mo(NAr)(^tBu₄OS)(C₂H₄) ( 4 ) that is isolable and relatively stable toward loss of ethylene below 60 °C. An X-ray study shows that the bond distances and angles for the ethylene ligand in 4 are like those found for bisalkoxide ethylene complexes of the same general type. Complex 1 (PMe₃) in the presence of one equivalent of B(C₆F₅)₃ catalyzes the homocoupling of 1-decene, allyltrimethylsilane, and allylboronic acid pinacol ester at ambient temperature. 1 (PMe₃), 2 (PMe₃), and 3 (PMe₃) all catalyze the ROMP of rac-endo,exo-5,6-dicarbomethoxynorbornene (rac-DCMNBE) in the presence of B(C₆F₅)₃, but the polyDCMNBE that is formed has a random structure.     

HPLC method transfer study for simultaneous determination of seven angiotensin II receptor blockers

In this study, a sensitive high‐performance liquid chromatography method was developed and validated for the simultaneous determination of seven angiotensin II receptor blockers, namely, hydrochlorothiazide, chlorthalidone, eprosartan mesylate, valsartan, losartan potassium, irbesartan, and candesartan cilexetil. Different chromatographic parameters were tested and fully optimized. Best chromatographic separation was accomplished on a reversed‐phase octadecylsilyl column (250 × 4.6 mm id; 5 μm) under gradient elution using methanol/sodium phosphate monobasic buffer (0.01 M, pH 6.5) as mobile phase. The detection of target analytes was obtained at 254 nm. The pH of the buffer has been selected according to Marvin^® sketch software. The proposed method was validated according to ICH guidelines and showed good precision (relative standard deviation < 1), good linearity (square of correlation coefficient ≥ 0.999), and high accuracy (between 98 and 102%) with detection limit and quantitation limit (40 and 160 ng/mL, respectively) for all the detected analytes.     

Superdense Coding with Uniformly Accelerated Particle

We study superdense coding with uniformly accelerated particle in single mode approximation and beyond single mode approximation. We use four different functions, the capacity of superdense coding, negativity, discord and the probability of success for evaluating the final results. In single mode approximation, all the four functions behave as expected, however in beyond single mode approximation, except the probability of success, the other three functions represent peculiar behaviors at least for special ranges where the beyond single mode approximation is strong.     

A stereoselective synthesis of (+)-L-733,060 from ethyl (R)-(+)-2,3-epoxypropanoate

An asymmetric synthesis of neurokinin substance P receptor antagonist (+)-L-733,060 starting from enantiomerically pure ethyl (R)-(+)-2,3-epoxypropanoate (ethyl glycidate) is described. The synthesis relies on a diastereoselective reductive amination, regioselective intramolecular epoxide opening, and in situ cyclization as the key steps.     

Competing phases in the high field phase diagram of (TMTSF)(2)ClO(4)

A model is presented for the high field phase diagram of (TMTSF)(2)ClO(4), taking into account the anion ordering, which splits the Fermi surface into two bands. For strong enough field, the largest metal spin density wave critical temperature corresponds to the N=0 phase, which originates from two intraband nesting processes. At lower temperature, the competition between these processes puts at disadvantage the N=0 phase vs the N=1 phase, which is due to interband nesting. A first order transition then takes place from the N=0 to N=1 phase. We ascribe to this effect the experimentally observed phase diagrams.     

Unusual aryl-porphyrin rotational barriers in peripherally crowded porphyrins

Previous studies of 5,10,15,20-tetraarylporphyrins have shown that the barrier for meso aryl-porphyrin rotation (DeltaG++(ROT)) varies as a function of the core substituent M and is lower for a small metal (M = Ni) compared to a large metal (M = Zn) and for a dication (M = 4H(2+)) versus a free base porphyrin (M = 2H). This has been attributed to changes in the nonplanar distortion of the porphyrin ring and the deformability of the macrocycle caused by the core substituent. In the present work, X-ray crystallography, molecular mechanics (MM) calculations, and variable temperature (VT) (1)H NMR spectroscopy are used to examine the relationship between the aryl-porphyrin rotational barrier and the core substituent M in some novel 2,3,5,7,8,10,12,13,15,17,18,20-dodecaarylporphyrins (DArPs), and specifically in some 5,10,15,20-tetraaryl-2,3,7,8,12,13,17,18-octaphenylporphyrins (TArOPPs), where steric crowding of the peripheral groups always results in a very nonplanar macrocycle. X-ray structures of DArPs indicate differences in the nonplanar conformation of the macrocycle as a function of M, with saddle conformations being observed for M = Zn, 2H or M = 4H(2+) and saddle and/or ruffle conformations for M = Ni. VT NMR studies show that the effect of protonation in the TArOPPs is to increase DeltaG++(ROT), which is the opposite of the effect seen for the TArPs, and MM calculations also predict a strikingly high barrier for the TArOPPs when M = 4H(2+). These and other findings suggest that the aryl-porphyrin rotational barriers in the DArPs are closely linked to the deformability of the macrocycle along a nonplanar distortion mode which moves the substituent being rotated out of the porphyrin plane.