Concomitant increase in putrescine incorporation with transferrin uptake into rat reticulocytes.

Concomitant increase in putrescine incorporation with transferrin uptake into rat reticulocytes was found. [14C]Putrescine incorporation occurred in the presence of transferrin at 37 degrees C. The subcellular distribution of incorporated [14C]putrescine showed that the incorporation in the plasma membrane time dependently increased. Both 125I-labeled transferrin uptake and [14C]putrescine incorporation decreased when ethylene glycol bis(2-aminoethyl ether)-N,N,N',N'-tetraacetic acid was added, while it increased with the addition of A23187.     

Photochemische Reaktionen. 121. Mitteilung. Zur Photochemie von ε,ζ-Methano-α,γ-dienonen und 7,8-Methano-1,3,5-trienen

Photochemistry of ε,ζ-Methano-α,γ-dienones and 7,8-Methano-1,3,5-trienes Irradiation of the δ-cyclopropyl-dienone (E)- 6 (λ ≥ 347 nm) gives (Z)- 6, 10 (1,5-sigmatropic H-shift), (E/Z)- 9 (electrocyclic process involving C(ε), C(ζ)-cleavage) and 11 (ring opening). The corresponding 6-cyclopropyl-triene (E)- 7 gives on singlet excitation (δ > 280 nm) 14 (1,5-sigmatropic H-shift) and, to a smaller extent, the bicyclo [3.2.0] heptenyl-dienes (E/Z)- 13 . However, on triplet excitation (λ ≥ 347 nm, benzophenone) (E)- 7 gives (E/Z)- 13 as the main products. On both ¹π,π*- and ³π,π*-excitation, (Z)- 7 and 15 are formed in small amounts.     

Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

Model complexes for metallated polythiophenes: gold(I) and palladium(II) complexes of bis(diphenylphosphino)oligothiophenes

The preparations of two new phosphinothiophene ligands, 3,3'-bis(diphenylphosphino)-2,2'-bithiophene (dppbt; 1) and 3,3' "-dihexyl-3',3' '-bis(diphenylphosphino)-2,5':2',2' ':5' ',2' "-quaterthiophene (hdppqt; 2) are reported. Oxidation of 1 gives 3,3'-bis(diphenylphosphine oxide)-2,2'-bithiophene (3), and the crystal structure of this compound was determined. Pd(II) and Au(I) complexes of these ligands have been synthesized and characterized. Crystal structures of [(dppbt)PdCl(2)] (1-Pd), [(hdppqt)PdCl(2)] (2-Pd), [(dppbt)(AuCl)(2)] (1-Au), and [(hdppqt)(AuCl)(2)] (2-Au) were obtained. [(dppbt)(AuCl)(2)] crystallized in two solid-state forms; crystals grown from CH(2)Cl(2)/Et(2)O show a gold-gold interaction of 3.3221(4) A, but from CH(2)Cl(2)/toluene, the molecule crystallizes as a toluene adduct (1-Au-tol) and does not show any gold-gold interaction. All the complexes were characterized via UV-vis spectroscopy and cyclic voltammetry, and the effect of the metal on the energy of the pi-pi transition and oxidation potential was determined. These data are correlated to the interannular torsion angles in the oligothienyl groups from the crystal structure studies.     

Preparation of porous clay minerals with organic-inorganic hybrid pillars using solvent-extraction route

A microporous clay mineral with organic-inorganic hybrid pillars was synthesized using a hydrochloric acid (HCl)/ethanol extraction method after intercalation of tetraethoxysilane (TEOS) or TEOS/methyltriethoxysilane (MTS) into the cetyltrimetylammonium ion (CTA)-exchanged vermiculite. The products retained their layered structure, due to the formation of stable pillars by the polymerization of hydrolyzed TEOS and MTS during the HCl/ethanol treatment. The BET surface areas, which increased to above 500 m2g(-1) with an increase in the HCl concentration up to 0.4 moldm(-3), are nearly equal to that of the calcined product obtained by the conventional method. However, the pore sizes of HCl/ethanol-treated materials were narrower than those of the calcined product, owing to the formation of the polysiloxane networks in the gallery. A water adsorption study showed that the product treated with a TEOS/MTS mixture had a hydrophobic surface as a result of the successful incorporation of methyl groups at the surface of the pillars. This novel method is advantageous for the synthesis of organophilic pillared clays with different kinds of organic materials in the interlayers.     

Crystal structures of V3S4 and V5S8

Crystal structures of the ordered phases of V₃S₄ and V₅S₈ were refined with single crystal data. Both are monoclinic. Chemical compositions, space groups and lattice constants are as follows: VS_1.47, $\text{I2}\text{m}$ (No. 12), a = 5.831(1), b = 3.267(1), c = 11.317(2)Å, β = 91.78(1)° and VS_1.64, $\text{F}\text{2}\text{m}$ (No. 12), a = 11.396(11), b = 6.645(7), c = 11.293(4), Å, β = 91.45(6)°. In both structures, short metal-metal bonds were found between the layers as well as within them. In comparison with the structure of Fe₇S₈, the stability of NiAs-type structure was discussed based on the detailed metal-sulfur distances.     

Effects of gamma-irradiation on CO2 fixation and

To investigate the possibility of ¹⁴CO₂ fixation using microorganisms in a high-dose area, the photosynthetic activity (specific production rate: SPR) and cellular proliferation (colony forming unit: CFU) of Euglena gracilis Z irradiated with gamma-rays at a dose of 0 to 500 Gy were determined. The dose responses of SPR and CFU suggested that it was possible to operate a CO₂ fixation system of Euglena up to 100 Gy. Even at a dose of 500 Gy, about half of the photosynthetic activity under non-irradiated condition was considered possible.     

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO2 in the presence of phosphate anions

The photocatalytic degradation for some kinds of dye-constituent aromatics with TiO₂ in the presence of phosphate anions in aqueous dispersion was investigated under both visible light (λ>480 nm) and UV irradiation. The influences of phosphate anion upon the degradation of organics under these different conditions was revealed by the measurement of point of zero ξ-potential (P _ZC) of TiO₂, UV-VIS spectra, HPLC and LC-MS. The adsorption and photodegradation of some organics, which adsorb on the surface of TiO₂ by a dominating group bearing a positive charge, was enhanced, while that of others, which adsorb on the surface of TiO₂ by a dominating group bearing negative charge, was depressed by the presence of phosphate anions under UV irradiation at the experimental conditions (pH 4.3). It was confirmed that better adsorption of organics on the surface of TiO₂ had an advantage in their photocatalytic degradation under UV irradiation. On the other hand, although the adsorption of rhodamine B (RhB) and methylene Blue (MB) markedly increased, their degradation under visible light irradiation was depressed in the presence of phosphate anions. It is suggested that phosphate anion greatly blocked the electron transfer from excited RhB and MB molecules as RhB and MB molecules predominantly adsorbed on the surface of TiO₂ through the electrostatic interaction with surface adsorbed phosphate anions.