Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.     

Synthesis of tricyclic compounds as steroid 5alpha-reductase inhibitors

A series of 4-phenoxybutyric acid derivatives attached to a tricyclic skeleton were prepared and evaluated as 5alpha-reductase inhibitors. Structure activity relationships for these compounds in terms of rat epididymis (type 2) 5alpha-reductase inhibitory activities reveal that 1) the substitution pattern at the 11-position of dibenz[b,e]oxepin influenced potency, 2) higher lipophilicity of the tricyclic skeleton improved potency, whereas the existence of a basic nitrogen atom in this skeleton was detrimental to potency, and 3) isobutyl substitution at the 8 positon of the azepine skeleton was tolerated. Among the tricyclic compounds studied, 4-[3-[5-benzyl-8-(2-methyl)propyl-10,11-dihydrodibenz[b,f]azepine- 2-carboxamido]phenoxy]butyric acid (26) was the most potent inhibitor of rat type 2 5alpha-reductase at 0.1 microM.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Synthesis of TiRru2 heterobimetallic and TiRuM (M = Rh, Rr, Pd, Pt) heterotrimetallic sulfido clusters from a hydrosulfido-bridged titanium-ruthenium complex

Treatment of the hydrosulfido-bridged titanium-ruthenium heterobimetallic complex [Cp2Ti(mu2-SH)2RuCl(eta5-C5Me5)] (1; Cp = eta5-C5H5) with an excess of triethylamine followed by addition of [RuCl2(PPh3)3] and [[(cod)M]2(mu2-Cl)2] (M = Rh, Ir; cod = 1,5-cyclooctadiene) led to the formation of the TiRu2 and TiRuM mixed-metal sulfido clusters [(CpTi)[(eta5-C5Me5)Ru][Ru(PPh3)2](mu3-S)2(mu2-Cl)2] (3) and [(CpTi)[(eta5-C5Me5)Ru][M(cod)](mu3-S)2(mu2-Cl)] (M = Rh (4a), Ir (4b)), respectively. On the other hand, the reactions of 1 with [M(PPh3)4] (M = Pd, Pt) afforded the TiRuM trinuclear clusters [(CpTiCl)[(eta5-C5Me5)Ru][M(PPh3)2](mu3-S)(mu2-S)(mu2-H)] (M = Pd (5a), Pt (5b)) with an unprecedented M3(mu3-S)(mu2-S) core. The detailed structures of these triangular clusters 3-5 have been determined by X-ray crystallography. Crystal data: 3, triclinic, P1, a = 12.448(4) A, b = 12.773(4) A, c = 17.270(4) A, alpha = 100.16(2) degrees, beta = 99.93(2) degrees, gamma = 114.11(3) degrees, V = 2373(1) A(3), Z = 2; 4a, triclinic, P1, a = 7.714(2) A, b = 11.598(3) A, c = 14.802(4) A, alpha = 80.46(2) degrees, beta = 82.53(2) degrees, gamma = 71.47(2) degrees, V = 1234.0(6) A3, Z = 2; 4b, triclinic, P1, a = 7.729(1) A, b = 11.577(2) A, c = 14.766(3) A, alpha = 80.14(1) degrees, beta = 82.71(1) degrees, gamma = 71.55(1) degrees, V = 1231.1(4) A3, Z = 2; 5a, monoclinic, P2(1)/c, a = 11.259(4) A, b = 16.438(4) A, c = 26.092(5) A, beta = 102.23(3) degrees, V = 4719(2) A(3), Z = 4; 5b, monoclinic, P2(1)/n, a = 11.369(2) A, b = 16.207(3) A, c = 26.116(2) A, beta = 102.29(1) degrees, V = 4701(1) A3, Z = 4.     

Cyclization mechanism for the synthesis of macrocyclic antibiotic lankacidin in Streptomyces rochei

The lankacidin biosynthetic gene cluster in Streptomyces rochei strain 7434AN4 was found to span 31 kb of the giant linear plasmid pSLA2-L and contain a polyketide synthase (PKS)/nonribosomal peptide synthetase (NRPS) hybrid gene (lkcA), type I PKS genes, and pyrroloquinoline quinone (PQQ) biosynthetic genes (lkcK-lkcO). Feeding of PQQ to a pqq mutant restored the lankacidin production, suggesting its crucial role in an oxidation process. However, formation of the 17-membered macrocyclic ring was not catalyzed by PQQ-dependent dehydrogenase (Orf23), but was by flavin-dependent amine oxidase (LkcE). Compound LC-KA05 isolated from an lkcE disruptant was an acyclic intermediate lacking the C2-C18 linkage. These results suggested a cyclization mechanism for the synthesis of the lankacidin macrocyclic skeleton.     

Enhanced sensitivity and resolution in (1)H solid-state NMR spectroscopy of paramagnetic complexes under very fast magic angle spinning

High-resolution NMR spectroscopy for paramagnetic complexes in solids has been rarely performed because of its limited sensitivity and resolution due to large paramagnetic shifts and associated technical difficulties. The present study demonstrates that magic angle spinning (MAS) at speeds exceeding 20 kHz provides unusually high sensitivity and excellent resolution in 1H solid-state NMR (SSNMR) for paramagnetic systems. Spinning-speed dependence of 1H MAS spectra showed that very fast MAS (VFMAS) at 24-28 kHz enhanced sensitivity by a factor of 12-18, compared with the sensitivity of 1H SSNMR spectra under moderate MAS at 10 kHz, for Cu(dl-alanine)2.H2O and Mn(acac)3, for which the spectral ranges due to 1H paramagnetic shifts reach 200 and 1000 ppm, respectively. It was theoretically and experimentally confirmed that the absolute sensitivity of 1H VFMAS for small paramagnetic complexes such as Cu(dl-alanine)2 can be an order of magnitude higher than that of equimolar diamagnetic ligands because of short 1H T1 ( approximately 1 ms) of the paramagnetic systems and improved sensitivity under VFMAS. On the basis of this demonstrated high sensitivity, 1H SSNMR micro analysis of paramagnetic systems in a nanomole scale is proposed. Applications were performed on two polymorphs of Cu(II)(8-quinolinol)2, which is a suppressor of human cancer cells. It was demonstrated that 1H VFMAS SSNMR spectra accumulated for 20 nmol of the polycrystalline samples in 10 min enabled one to distinguish alpha- and beta-forms of Cu(II)(8-quinolinol)2 on the basis of shift positions and line widths.     

Chemical studies on the anobiidae: Sex pheromone of the drugstore beetle, stegobium paniceum (L.) (coleoptera)

Chemical an spectroscopic evidence is presented to show that 2,3-dihydro-2,3,5-trimethyl-6-(1-methyl-2-oxobutyl)-4H-pyran-4-one (10) is the sex pheromone produced by the female drugstore beetle, Stegobium paniceum L.     

Synthesis and DNA binding properties of iminodiacetic acid-linked polyamides: characterization of cooperative extended 2:1 side-by-side parallel binding

A series of iminodiacetic acid (IDA)-linked polyamides (DpPyPyPy-IDA-PyPyPyDp) were prepared and constitute polyamides joined head-to-head by a functionalizable five-atom linker. It was found that the IDA linker exerts a unique influence over the DNA binding conformation differing from both the beta-alanine (extended) or gamma-aminobutyric acid (hairpin) linkers, resulting in cooperative parallel side-by-side 2:1 binding in an extended conformation most likely with a staggered versus stacked alignment. A generalized variant of a fluorescent intercalator displacement (FID) assay conducted on a series of hairpin deoxyoligonucleotides containing a systematically varied A/T-rich binding-site size was used to distinguish between the binding modes of the IDA-linked polyamides.     

Heat of immersion of iron(III) oxides in water at 25°C

The heat of immersion in water was measured at 25°C for three iron(III) oxides using a twin-type microcalorimeter. One of the samples was commercial α-Fe₂O₃ (sample C) and the other two (samples M and F) were prepared by calcining magnetite and iron(III) hydroxide in air at various temperatures, T_p, from 300 to 700°C. The samples were evacuated at outgassing temperature, T_o, between room temperature and 500°C at a pressure of 1 × 10^?2?2.7 × 10^?2N m^?2 for 6 h. The heat of immersion, h_i(J m^?2), of samples C and M increased with an increase in T_o and showed the maximum h_i at T_o =400°C, while sample F did not show the maximum up to T_o =500°C. The systematic correlation was not observed between h_i and T_p of sample F. The heat of reproduction of the surface hydroxyl group on sample F was approximately estimated as 6.6 × 10⁴ J mole^?1 H₂O.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.