Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Platanionosides D-J: megastigmane glycosides from the leaves of Alangium platanifolium (Sieb. et Zucc.) Harms var. platanifolium Sieb. et Zucc

From the leaves of Alangium paltanifolium var. platanifolium, collected in Fukuoka Prefecture, twelve further megastigmane glycosides were isolated. Seven of them, named platanionosides D-J (1-7), were found to be new compounds. Their structures were elucidated from spectroscopic evidence and their absolute structures were determined from beta-D-glucosylation-induced shift trends of 13C-NMR and by application of a modified Mosher's method.     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

Synthesis of polymers by use of divalent metal salts of monohydroxyethyl phthalate: Metal-containing isocyanurate-type crosslinked polyurethanes

Divalent metal salts (I) of monohydroxyethyl phthalate have catalytic activity for polymerization of isocyanate groups. The synthesis of novel metal-containing isocyanurate-type crosslinked polyurethanes were investigated by the crosslinking reaction of I in DMF with diisocyanates or urethane prepolymers, that is, diisocyanate adducts of polyethylene glycol. 2,4-Toluene diisocyanate and diphenylmethane diisocyanate were used as diisocyanates, and DMF was the solvent. The crosslinking reactions were followed by determining the gelation time. Gelation time decreased with increasing temperature. The Ca salt was more effective than the Mg salt in the crosslinking reaction. The yields of resulting metal-containing three-dimensional polymers decreased with increasing metal content in the feed. The Ca salt was more easily introduced into the network polymers than the Mg salt was. Decomposition temperatures decreased on introducing metals into the network polymers. Some physical properties of the metal-containing network polymers are also discussed.     

Direct observation of the multistep helix formation of poly-L-glutamic acids

The helix formation dynamics of poly-L-glutamic acids (PGAs) were observed by the microsecond-resolved Fourier transform infrared (FTIR) and circular dichroism (CD) spectroscopies. The helix formation of 34-residue PGA from random coil at pH (or pD for FTIR) 8.0 was initiated by a pH jump to 4.9 using the rapid solution mixer whose mixing dead time is 50 micros. The amide I' line in the time-resolved FTIR spectra exhibited the fast (<100 micros) increase of the total helical content. The time-resolved CD spectra of the same process also showed the fast (<150 micros) formation of short helical segments (5 +/- 1 residues), which was followed by the slower (<1 ms) elongation of the short helices to longer helices (>10 residues). Similar dynamics were observed for the same pH jump of approximately 190-residue PGA, although there were additional steps that made the helix formation of approximately 190-residue PGA more complex. The observed multistep helix formation is likely caused by the strong hydrogen-bonding interactions between the protonated side chains of PGAs.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

SmI2-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates with application to the synthesis of functionalized (Z)-fluoroalkene-type dipeptide isosteres

A samarium diiodide (SmI(2))-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates (15, 29, and 34) was successfully applied to the synthesis of (Z)-fluoroalkene dipeptide isosteres (23, 30, and 35), which have served as potential dipeptide mimetics. Reduction of the gamma,gamma-difluoro-alpha,beta-enoates by SmI(2) proceeded via successive two-electron transfers to form dienolate species which upon kinetically controlled trapping with t-BuOH yielded Xaa-Gly-type fluoroalkene isosteres exemplified by 23, 30, and 35. Replacement of the t-BuOH kinetic trapping agent with aldehydes or ketones provided access to alpha-substituted fluoroalkene isosteres (43 and 45) through aldol reactions of Sm-dienolates with the carbonyl compounds. Of particular note, the use of the SmI(2)-HCHO reagent system with chiral enoate 34 provided D-Phe-psi[(Z)-CF[double bond]CH]-D/L-Ser isosteres (45), which could be converted to enantiomerically pure isosteres (49-52) that bore a variety of side chain functionalities at the alpha-position. This was achieved by a sequence of manipulations consisting of beta-lactone formation followed by chromatographic separation and ring-opening with soft nucleophiles. Included in the present work is the first utilization of a Rh-catalyzed Reformatsky reaction of chiral imines for the stereoselective preparation of alpha,alpha-difluoro-beta-amino acid derivatives (28 and 33). The appropriate choice of reagents (carbonyl compounds for kinetic trapping or ring-opening nucleophiles and imines for Reformatsky reactions) allows the presented methodology to yield various fluoroalkene isosteres possessing a wide range of side chain functionalities.     

A novel method for atomic absorption spectroscopy based on the analyte-Zeeman effect

A new type of atomic absorption spectrometry using the Zeeman effect of sample materials is proposed. A magnetic field was applied to the sample vapor in the direction perpendicular to the propagation of light emitted from an atomic spectral source. Absorption of radiation polarized perpendicular and parallel to the magnetic field was observed alternatively. The absorption difference was proportional to the true atomic absorption, and was not interfered with by any other molecular absorption and light scattering, i.e., background absorption. The background absorption could be monitored at exactly the same wavelength as an atomic absorption line. Suitable magnetic field strength was found for each line of the various elements.