TOSAR – A Topological Method for the Representation of Synthetic and Analytical Relations of Concepts

In mechanized systems used for searching in literature stores there is a steadily growing necessity not only to be able to formulate concepts as a search condition but also the characteristic connections under which these concepts appear in the inquiry. In this way the precision of the mechanized literature search is considerably increased. TOSAR has been developed in order to improve computerized literature searching in this respect.     

Mesomorphism,isomerization, and dynamics in a new series of pyramidic liquid crystals

Nona-alkanoyloxy tribenzocyclononene (CTV-n, where n is the number of carbons in the side chains) were prepared for n = 2 to 14. The homologues of this series appear in two stable isomeric forms, rigid crown and flexible saddle. We report on their isomerization equilibria and dynamics in solution and on their mesomorphic properties in the neat state. The crown-saddle equilibrium and interconversion kinetics of the CTV-8 isomers were studied in dimethyl formamide solutions using high-resolution (1)H NMR in the temperature range from 50 to 130 degrees C. At lower temperatures, the isomerization is too slow to measure. In this range the equilibrium saddle fraction increases from approximately 0.40 to approximately 0.65, whereas the isomerization rate increases from approximately 10(-)(4) to approximately 1 s(-)(1). The saddle isomer undergoes fast pseudorotation at room temperature, but below about -50 degrees C, it becomes slow enough to affect the NMR line width. The rate parameters for this process were estimated from the carbon-13 spectra in methylene chloride solutions to be, k(p)(-100 degrees C) approximately 1.7 x 10(3) s(-)(1) and E(a) approximately 9.6 kJ/mol. The slow crown-saddle isomerization at room temperature (half-life of about one year) allows quantitative separation (by chromatography) of the two isomers and their separate investigation. When the alkanoyloxy side chains are sufficiently long both isomers are mesogenic (n >or= 4 for the saddle and n >or= 5 for the crown), exhibiting hexagonal columnar mesophases. The structure, dynamics, and mesomorphic properties of these mesophase were investigated by X-ray diffraction, optical polarizing microscopy, differential scanning calorimetry, and NMR. The lattice parameters of the crown and saddle mesophases of corresponding homologues are almost identical and increase monotonically with increasing length of the side chains. The clearing temperatures of the saddle isomers are consistently lower than those of the corresponding crowns. Within each series, the clearing temperatures are almost independent of the length of the side chains (156 to 170 degrees C for the crown and 115 to 148 degrees C for the saddle). The thermal and kinetic properties of the neat compounds lead to peculiar phase sequences, as observed in the polarizing microscope and in the DSC thermogram, involving repeated, back and forth, interconversion between the two isomers. Carbon-13 MAS NMR measurements of the crown and saddle mesophases of several homologues were carried out. The spectra of the crown mesophase exhibit dynamic features consistent with planar 3-fold molecular jumps about the column axes. A quantitative analysis for the CTV-8 crown homologue yielded the following Arrhenius parameters, A = 3.1 x 10(22)s(-)(1) and E(a) = 130.1kJ/mol. These unusually high values suggest that the barrier to the jump process is temperature dependent, decreasing with increasing temperature. The rate of this 3-fold jump process is slower for the lower homologues and faster for the higher ones. In contrast, the saddle isomers in the mesophase do not show dynamic effects in their carbon-13 MAS spectra. They do not undergo pseudorotation, and it appears that the molecules remain locked within the columns in a saddle conformation, up to the clearing temperature. However, on (super-)cooling to room temperature and below, selective line broadening is observed in their carbon-13 MAS spectra. This suggests that the saddle conformation is twisted in the mesophase and undergoes fast high-amplitude jumps between the twisted forms. On cooling, these high-amplitude librations freeze out to give an orientationally disordered state. On a very long time scale (of the order of days at 100 degrees C), the saddle mesophase transforms into that of the crown, apparently by sublimation.     

Stabilization of p-block organoelement terminal hydroxides, thiols, and selenols requires newer synthetic strategies

Metal hydroxides represent a very interesting and highly useful class of compounds that have been known to chemists for a very long time. While alkali and alkaline earth metal hydroxides (s‐block) are commonplace chemicals in terms of their abundance and their use in a chemical laboratory as bases, the interest in Brønsted acidic molecular terminal hydroxides of p‐block elements, such as aluminum and silicon, has been of recent origin, with respect to the variety of applications these compounds can offer both in materials science and catalysis. Moreover, these systems are environmentally friendly, relative to the metal halides, owing to their ‐OH functionality (resembling that of water). Design and conceptualization of the corresponding terminal thiols, selenols, and tellurols (M? SH, M? SeH, and M? TeH) offer even more challenging problems to synthetic inorganic chemists. This concept summarizes some of the recent strategies developed to stabilize these otherwise very unstable species. The successful preparation of a number of silicon trihydroxides a few years back resulted in the generation of several model compounds for metal–silicates. The recent synthesis of unusual aluminum compounds such as RAl(OH)₂, RAl(SH)₂, and RAl(SeH)₂ with terminal EH (E=O, Se, or Se) groups is likely to change the ways in which some of the well‐known catalytic conversions are being carried out. The need for very flexible and innovative synthetic strategies to achieve these unusual compounds is emphasized in this concept.     

Recent applications of the ring-oven technique : A brief review

The ring-oven technique is a special type of spot analysis. In this review, papers published since 1976 are discussed. The aspects dealt with include developments in the technique and its use, the identification and determination of inorganic ions, organic substances, enzymatic analysis, applications to air and water samples, and combinations with other techniques.     

Darstellung und Kristallstruktur von Cs2Sb4S7

Preparation and Crystal Structure of Cs₂Sb₄S₇ The first thioantimonite of Cesium has been synthesized and its crystal structure determined. The substance crystallizes monoclinic with spacegroup P2₁/_c. The lattice constants are a = 1111.2(5) pm, b = 1227.1(5) pm, c = 1163.7(5) pm and ß = 97.60(5)°. There are four formula units in the unit cell. Sb–S chains are formed by trigonal SbS₃ pyramids and ψ-trigonal SbS₄ bipyramids.     

Fused lactones as a route to functionalized 1-substituted indoles

Indole lactones 8 and 14 were synthesized as a means of functionalizing the 1-isopropyl substituent of the indole nucleus. Lactone 8 , upon reduction with diisobutylaluminum hydride, produces lactol 9 which behaves like a masked hydroxy aldehyde and undergoes a Horner-Emmons reaction with triethyl phosphonoacteate to give α,β-unsaturated ester 3 which possesses a hydroxyl group on the 1-isopropyl moiety.     

Polymer melt flow measurements by laser doppler velocimetry

Laser Doppler velocimetry (LDV) is a new tool for fluid dynamics studies. Using LDV the velocity vector field can be measured without disturbing the flow itself. However, in polymer melt fluid dynamics difficulties arise because of temperature problems, the relatively high pressure involved, and the often extremely slow flows. In this paper a LDV system is described which was set up especially for polymer melt flow investigations.     

Chiroptical detection during liquid chromatography,part 5: On-line measurement of circular dichroism spectra Δε(λ) during stops of chromatographic flow

Summary A procedure is described which serves to measure circular dichrograms () on line during stops of flow in liquid chromatography. Since the concentration of substrate in the spectrometer cell during the stop is not known, the differential absorption coefficients are calculated from the experimental differential absorbances A by means of UV absorption (i. e. photomultiplier voltage) data. Verifications of the procedure are obtained by its application to three substrates (Table 1), the () spectra of which were known. The present on-line technique is compared with a corresponding off-line method.The N,N-dimethylthiobenzamides1 and2 as well as the 9,10-phenanthrenequinone7 consist of interconvertible enantiomers because their planar states are destabilized by steric overcrowding of groups. The unknown dichrograms () of1, 2 and7 are obtained (Figs. 2 and 4) and discussed with reference to the helicities of these molecules.In memory of the late Professor Dr. Dr. h. c. Günther Snatzke.     

Solid-phase development of chiral phosphoramidite ligands for enantioselective conjugate addition reactions

The development of a method for the optimization of chiral ligands for the steric steering of enantioselective Cu-catalyzed conjugate additions of Znalkyls to enones is described. The method is based on combinatorial principles and solid-phase techniques. It includes the combinatorial synthesis of chiral bispidine-derived ligands embodying a phosphoramidite group on the solid phase and their investigation in immobilized form in the conjugate addition of ZnEt2 to cyclohexenone as test reaction. The best identified ligands were also synthesized separately and investigated in its soluble form. The results obtained for the polymer-bound ligands correctly mirrored the performance of the soluble ligands. The library embodied members giving ee values varying between 3 and 67%. The "positional scanning" approach proved to be invalid for the study of the ligand system, indicating that this approach in general should be applied with care. Taken together, the method allowed for rapid and efficient optimization of the ligands and led to the development of the first enantioselective, Cu-catalyzed conjugate addition reaction with a polymer-bound ligand.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000