The role of the solvent in equilibrium and kinetic aspects of metal chelate extractions

Equilibria and kinetics for the extraction of nickel(II) and copper(II) by 2-hydroxy-5-nonylbenzophenone oxime (LIX 65N) in seven organic solvent systems were studied in order to test the validity of several hypotheses related to the role of the solvent in equilibrium and kinetic aspects of metal chelate extraction. For the nickel—LIX 65N system, the extraction constant is essentially independent of the solvent system, whereas for the copper—LIX 65N system, the extraction constant is not independent of solvent; this indicates that while the stoichiometry of the nickel chelate remains the same in all solvents, that of copper does not. The observed rate constant for the nickel—LIX 65N extraction was found to vary inversely with the LIX 65N distribution constant as predicted from a mechanism involving slow formation of the 1:1 complex. The observed reaction rate constant for the copper—LIX 65N varied inversely with the square of the distribution constant, also in accordance with the previously postulated mechanism of the slow formation of the 2:1 copper complex. This study, therefore, unequivocally eliminates the interfacial mechanism in favor of the homogeneous chemical reaction mechanism for the extraction of metal ions by LIX 65N, as well as by other similar high-molecular-weight extractants.     

ESR. Spectra and Structures of Radical Anions in the Dibenzo[a,e]cyclooctene Series

ESR. studies are reported for the radical anions of 5,6-didehydro- and 5,6,11,12-tetradehydro-dibenzo[a,e]cyclooctene (III and IV, resp.), in addition to that of dibenzo[a,e]cyclooctene (II) itself, the spectrum of which has been reexamined. Comparison of the proton and ¹³C coupling constants for II·?, III·? and IV·? indicates that the three radical anions do not differ greatly in their electronic and molecular structures. This statement implies that II·? should also be substantially planar, i.e., the tub-shaped eight-membered ring in II is expected to flatten on passing from the neutral molecule to its radical anion. Support for postulating such a change in geometry, analogous to that encountered with the parent cyclooctatetraene (I), is provided by INDO calculations.     

[Bi6O4.5(OH)3.5]2(NO3)11: a new anhydrous bismuth basic nitrate. Synthesis and structure determination from twinned crystals

The bismuth basic nitrate [Bi₆O_4.5(OH)_3.5]₂(NO₃)₁₁ crystallizes in the monoclinic space group P2₁ with , , , β=107.329(17)° and . Its structure has been determined from , twinned crystal X-ray data (16 781 reflections, 683 parameters, R=0.0703). It is built upon [Bi₆O_x(OH)_8−x]^(10−x)+, x=4 and x=5 hexanuclear complexes and nitrate groups. The polycationic entities are linked to the nitrate anions either by hydrogen bonds or through bismuth-oxygen coordination. Even at , the [Bi₆O₄(OH)₄]⁶⁺ and [Bi₆O₅(OH)₃]⁵⁺ polycations could not be observed as such, the crystal structure refinement only detecting an average [Bi₆O_4.5(OH)_3.5]^5.5+ polycation. To prove the presence of both hexanuclear complexes in the structure, we report the existence of a correlation between the bismuth-linked oxygen bond-valence parameters and the presence, or not, of hydroxyl groups. Moreover, the Raman spectrum of the new anhydrous bismuth basic nitrate is compared to those of [Bi₆O₅(OH)₃](NO₃)₅·3H₂O, [Bi₆O₄(OH)₄](NO₃)₆·4H₂O, and two yet uncharacterized bismuth nitrates.     

A cation-pi binding interaction with a tyrosine in the binding site of the GABAC receptor

GABA(C) (rho) receptors are members of the Cys-loop superfamily of neurotransmitter receptors, which includes nicotinic acetylcholine (nACh), 5-HT(3), and glycine receptors. As in other members of this family, the agonist binding site of GABA(C) receptors is rich in aromatic amino acids, but while other receptors bind agonist through a cation-pi interaction to a tryptophan, the GABA(C) binding site has tyrosine at the aligning positions. Incorporating a series of tyrosine derivatives at position 198 using unnatural amino acid mutagenesis reveals a clear correlation between the cation-pi binding ability of the side chain and EC(50) for receptor activation, thus demonstrating a cation-pi interaction between a tyrosine side chain and a neurotransmitter. Comparisons among four homologous receptors show variations in cation-pi binding energies that reflect the nature of the cationic center of the agonist.     

Effect of diffusion on rates and molecular weights in graft polymerization

A theoretical analysis has been made of the graft polymerization process in terms of the quantitative interrelationship between the initiation rate R_i, the k_p/k_t^1/ ratio of the monomer, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, and the diffusivity D of the monomer in the polymer. It is shown how the values of these parameters in any grafting system interact to lead to diffusion-controlled graft polymerization. Whether graft polymerization is diffusion-free or diffusion-controlled depends on the values of K_p, d, k_p/k_p^1/2, and L as gathered in the parameter A = [(K_p/k_t^1/2)R_i, D,/^1/2] L/2. When the values of the various terms are such that A is less than 0.1 (i.e., D is large while R_i, k_p, and L are small), the reaction is diffusion-free. When A is greater than 3 (i.e., D is small while R_i, k_p, and L are large), the reaction is diffusion-controlled. The derived equations showing the relationship between kinetic and diffusional parameters are theoretically applicable to all grafting systems, i.e., for all monomer-polymer combinations under all conditions of reaction temperature, radiation intensity and polymer film thickness. The theoretical analysis has been verified for the rate and degree of polymerization for the radiation-induced graft polymerization of styrene to polyethylene.     

Inclusion Complexes of Cyproterone Acetate with Cyclodextrins in Aqueous Solution

Cyproterone acetate (CPA) is a steroidal antiandrogen with a progestogenic activity. Given that this molecule has a very poor water solubility (2.1 g/mL), different cyclodextrins (CDs) were tested to form inclusion complexes and to increase solubility. Two different techniques were compared to study the affinity between CPA and CDs: phase-solubility studies and NMR spectroscopy. The stoichiometry and the stability constant could be determined for most complexes with the aid of phase-solubility studies. The greatest increase in solubility was achieved with the methylated -CDs, but hydroxypropylated - and -CDs also gave enhanced solubilities. ¹H-NMR studies showed a solubility increase similar to that found with phase-solubility studies. The proof of inclusion in the2,6-dimethyl--CD (DIMEB) was shown by ¹H-NMR and t-ROESY spectra.     

Decarbonylative ether dissection by iridium pincer complexes

A unique chain-rupturing transformation that converts an ether functionality into two hydrocarbyl units and carbon monoxide is reported, mediated by iridium(i) complexes supported by aminophenylphosphinite (NCOP) pincer ligands. The decarbonylation, which involves the cleavage of one C–C bond, one C–O bond, and two C–H bonds, along with formation of two new C–H bonds, was serendipitously discovered upon dehydrochlorination of an iridium(iii) complex containing an aza-18-crown-6 ether macrocycle. Intramolecular cleavage of macrocyclic and acyclic ethers was also found in analogous complexes featuring aza-15-crown-5 ether or bis(2-methoxyethyl)amino groups. Intermolecular decarbonylation of cyclic and linear ethers was observed when diethylaminophenylphosphinite iridium(i) dinitrogen or norbornene complexes were employed. Mechanistic studies reveal the nature of key intermediates along a pathway involving initial iridium(i)-mediated double C–H bond activation.

A unique chain-rupturing transformation that converts an ether functionality into two hydrocarbyl units and carbon monoxide is reported.     

On the viability of small endohedral hydrocarbon cage complexes: X@C4H4, X@C8H8, X@C8H14, X@C10H16, X@C12H12, AND X@C16H16

Small hydrocarbon complexes (X@cage) incorporating cage-centered endohedral atoms and ions (X = H(+), H, He, Ne, Ar, Li(0,+), Be(0,+,2+), Na(0,+), Mg(0,+,2+)) have been studied at the B3LYP/6-31G(d) hybrid HF/DFT level of theory. No tetrahedrane (C(4)H(4), T(d)()) endohedral complexes are minima, not even with the very small hydrogen atom or beryllium dication. Cubane (C(8)H(8), O(h)()) and bicyclo[2.2.2]octane (C(8)H(14), D(3)(h)()) minima are limited to encapsulating species smaller than Ne and Na(+). Despite its intermediate size, adamantane (C(10)H(16), T(d)()) can enclose a wide variety of endohedral atoms and ions including H, He, Ne, Li(0,+), Be(0,+,2+), Na(0,+), and Mg(2+). In contrast, the truncated tetrahedrane (C(12)H(12), T(d)()) encapsulates fewer species, while the D(4)(d)() symmetric C(16)H(16) hydrocarbon cage (see Table of Contents graphic) encapsulates all but the larger Be, Mg, and Mg(+) species. The host cages have more compact geometries when metal atoms, rather than cations, are inside. This is due to electron donation from the endohedral metals into C-C bonding and C-H antibonding cage molecular orbitals. The relative stabilities of endohedral minima are evaluated by comparing their energies (E(endo)) to the sum of their isolated components (E(inc) = E(endo) - E(cage) - E(x)) and to their exohedral isomer energies (E(isom) = E(endo) - E(exo)). Although exohedral binding is preferred to endohedral encapsulation without exception (i.e., E(isom) is always exothermic), Be(2+)@C(10)H(16) (T(d)(); -235.5 kcal/mol), Li(+)@C(12)H(12) (T(d)(); 50.2 kcal/mol), Be(2+)@C(12)H(12) (T(d)(); -181.2 kcal/mol), Mg(2+)@C(12)H(12) (T(d)(); -45.0 kcal/mol), Li(+)@C(16)H(16) (D(4)(d)(); 13.3 kcal/mol), Be(+)@C(16)H(16) (C(4)(v)(); 31.8 kcal/mol), Be(2+)@C(16)H(16) (D(4)(d)(); -239.2 kcal/mol), and Mg(2+)@C(16)H(16) (D(4)(d)(); -37.7 kcal/mol) are relatively stable as compared to experimentally known He@C(20)H(20) (I(h)()), which has an E(inc) = 37.9 kcal/mol and E(isom) = -35.4 kcal/mol. Overall, endohedral cage complexes with low parent cage strain energies, large cage internal cavity volumes, and a small, highly charged guest species are the most viable synthetic targets.     

Homonuclear transition-metal trimers

Density-functional theory has been used to determine the ground-state geometries and electronic states for homonuclear transition-metal trimers constrained to equilateral triangle geometries. This represents the first application of consistent theoretical methods to all of the ten 3d block transition-metal trimers, from scandium to zinc. A search of the potential surfaces yields the following electronic ground states and bond lengths: Sc3(2A1',2.83 A), Ti3(7E',2.32 A), V3(2E",2.06 A), Cr3(17E',2.92 A), Mn3(16A2',2.73 A), Fe3(11E",2.24 A), Co3(6E",2.18 A), Ni3(3A2",2.23 A), Cu3(2E',2.37 A), and Zn3(1A1',2.93 A). Vibrational frequencies, several low-lying electronic states, and trends in bond lengths and atomization energies are discussed. The predicted dissociation energies DeltaE(M3-->M2+M) are 49.4 kcal mol(-1)(Sc3), 64.3 kcal mol(-1)(Ti3), 60.7 kcal mol(-1)(V3), 11.5 kcal mol(-1)(Cr3), 32.4 kcal mol(-1)(Mn3), 61.5 kcal mol(-1)(Fe3), 78.0 kcal mol(-1)(Co3), 86.1 kcal mol(-1)(Ni3), 26.8 kcal mol(-1)(Cu3), and 4.5 kcal mol(-1)(Zn3).     

Pore formation during the pyrolysis of C-Nb2O5 and C-Ta2O5 xerogels

Binary organic-inorganic gels have been prepared by mixing a carbonaceous hydrosol and a Nb₂O₅ or Ta₂O₅ sol derived by hydrolysis of the alkoxides. The gels are pyrolyzed under an inert atmosphere into precursors in which carbon and the metal oxides are mixed very intimately. High temperature treatment converts the precursors into the cubic face centered carbides. The precursors as well as the carbides have been shown to be micro- and mesoporous materials. Measurements of nitrogen adsorption reveal a characteristic change of the shapes of the isotherms (Type I Type IV) and of the hysteresis loops (H4H2H1) during the thermal processes. Pore widening has been observed with rising temperature. The phenomena of crystallization, carbothermal reduction and sintering were found to control the pore shape and size. The results of the adsorption measurement correlate well with those of the thermoanalytical and X-ray diffraction studies.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday