Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Directional Self‐Assembly of Fluorinated Star Block Polymer Thin Films Using Mixed Solvent Vapor Annealing

We demonstrate the directional alignment of perpendicular‐lamellae domains in fluorinated three‐armed star block polymer (BP) thin films using solvent vapor annealing with shear stress. The control of orientation and alignment was accomplished without any substrate surface modification. Additionally, three‐armed star poly(methyl methacrylate‐block‐styrene) [PMMA‐PS] and poly(octafluoropentyl methacrylate‐block‐styrene) were compared to their linear analogues to examine the impact of fluorine content and star architecture on self‐assembled BP feature sizes and interdomain density profiles. X‐ray reflectometry results indicated that the star BP molecular architecture increased the effective polymer segregation strength and could possibly facilitate reduced polymer domain spacings, which are useful in next‐generation nanolithographic applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1663–1672     

A Facile Route to Backbone‐Tethered N‐Heterocyclic Carbene (NHC) Ligands via NHC to aNHC Rearrangement in NHC Silicon Halide Adducts

The reaction of 1,3‐diisopropylimidazolin‐2‐ylidene (iPr₂Im) with diphenyldichlorosilane (Ph₂SiCl₂) leads to the adduct (iPr₂Im)SiCl₂Ph₂ 1 . Prolonged heating of isolated 1 at 66 °C in THF affords the backbone‐tethered bis(imidazolium) salt [(^aHiPr₂Im)₂SiPh₂]²⁺ 2 Cl^? 2 (“^a” denotes “abnormal” coordination of the NHC), which can be synthesized in high yields in one step starting from two equivalents of iPr₂Im and Ph₂SiCl₂. Imidazolium salt 2 can be deprotonated in THF at room temperature using sodium hydride as a base and catalytic amounts of sodium tert‐butoxide to give the stable N‐heterocyclic dicarbene (^aiPr₂Im)₂SiPh₂ 3 , in which two NHCs are backbone‐tethered with a SiPh₂ group. This easy‐to‐synthesize dicarbene 3 can be used as a novel ligand type in transition metal chemistry for the preparation of dinuclear NHC complexes, as exemplified by the synthesis of the homodinuclear copper(I) complex [{^a(ClCu?iPr₂Im)}₂SiPh₂] 4 .     

Tuning of Supramolecular Architectures of l‐Valine‐Containing Dicyanoplatinum(II) 2,2′‐Bipyridine Complexes by Metal–Metal, π–π Stacking,and Hydrogen‐Bonding Interactions

A series of newly synthesized dicyanoplatinum(II) 2,2′‐bipyridine complexes exhibits self‐assembly properties in solution after the incorporation of the l ‐valine amino units appended with various hydrophobic motifs. These l ‐valine‐derived substituents were found to have critical control over the aggregation behaviors of the complexes in the solution state. On one hand, one of the complexes was found to exhibit interesting circularly polarized luminescence (CPL) signals at low temperature due to the formation of chiral spherical aggregates in the temperature‐dependent studies. On the other hand, systematic transformation from less uniform aggregates to well‐defined fibrous and rod‐like structures via Pt???Pt and π–π stacking interactions has also been observed in the mixed‐solvent studies. These changes were monitored by UV/Vis absorption, emission, circular dichroism (CD), and CPL spectroscopies, and morphologies were studied by electron microscopy.     

Communication: Furanoside C-Glycosides from an O-Methyl Pyranoside: An Unexpected ß-Hydroxy-1,3-Dithiane Rearrangement

In the course of our investigations on the synthesis of enantiomerically pure anthracycline antibiotics by incorporation of chiral building blocks we prepared the O-methyl 3-deoxy-2-C-ethylribopyranoside 1.¹ The further synthetic plan required the conversion of 1 to the dithioacetal 2 followed by glycol cleavage to a partially protected 1,4-dialdehyde for coupling experiments to leucoquinizarine in a Marschalk reaction. However, the reaction sequence failed¹ and optically active rhodomycinone had to be synthezised in a different way.² A reinvestigation of the synthesis revealed that the thioacetalization of 1 using the acidic conditions recommended by Corey et al.³ did not yield the usual open chain dithioacetal 2 but rather three new unexpected products. The less polar fraction was identified by ¹H and ¹³C NMR as tetrahydrofuran derivative 3a with the dithiane ring in a ß-orientation. The solid polar fraction (12%) consisted of a nonseparable 1:2.2 mixture of the epimeric deoxygenation products 4/5.     

Synthesis of Zinc Oxide Nanoparticles Using Rubus fairholmianus Root Extract and Their Activity against Pathogenic Bacteria

Recently, the biosynthesis of zinc oxide nanoparticles (ZnO NPs) from crude extracts and phytochemicals has attracted much attention. Green synthesis of NPs is cost-effective, eco-friendly, and is a promising alternative for chemical synthesis. This study involves ZnO NPs synthesis using Rubus fairholmianus root extract (RE) as an efficient reducing agent. The UV spectrum of RE-ZnO NPs exhibited a peak at 357 nm due to intrinsic bandgap absorption and an XRD pattern that matches the ZnO crystal structure (JCPDS card no: 36-1451). The average particle size calculated from the Debye–Scherrer equation is 11.34 nm. SEM analysis showed that the RE-ZnO NPs spherical in shape with clusters (1–100 nm). The antibacterial activity of the NPs was tested against Staphylococcus aureus using agar well diffusion, minimum inhibitory concentration, and bacterial growth assay. The R. fairholmianus phytochemicals facilitate the synthesis of stable ZnO NPs and showed antibacterial activity.     

Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion‐based 3D printing is used to fabricate photo‐crosslinkable gelatin‐based scaffolds with pore sizes in the range of 200–600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC‐based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.     

Small-angle X-ray scattering study of liquid crystalline polycarbonates based on α-methyl stilbene mesogen and methylene-containing flexible spacer

Crystallization and melting behavior are studied by small-angle X-ray scattering (SAXS) for a series of recently synthesized monotropic liquid crystalline polycarbonates based on α-methyl stilbene mesogen and methylene flexible spacer. The one-dimensional electron density correlation function is used to obtain long period, crystal thickness, and linear crystallinity from the Lorentz-corrected SAXS intensity. Changes in these parameters during nonisothermal crystallization and melting are explained by a model of dual crystal populations. The primary crystals form first using the liquid crystalline phase as crystal nuclei, while smaller and less perfect crystals form later from the isotropic phase at low temperature. The results of the real-time SAXS study of isothermal crystallization also support the view that the nematic phase serves as crystal nuclei for fast crystallization. An odd-even effect in crystal thickness and linear crystallinity is observed in all the SAXS experiments mentioned above. The results of this study and our complementary wide-angle X-ray scattering (WAXS) investigation show clearly that the difference in the position of the neighboring carbonate dipoles on a chain affects structural organization both at the unit cell level and at the level of the crystal in these monotropic LCPs. © 1995 John Wiley & Sons, Inc.